Here you can exchange your experience and datas about your home build boards
-
downunder
- Very Frequent Poster
- Posts: 2822
- Joined: Mon Jul 01, 2013 7:16 am
- Gear: building my own
- Brand Affiliation: None
- Location: Perth, Australia
-
Has thanked:
153 times
-
Been thanked:
161 times
Postby downunder » Sun Apr 18, 2021 3:23 am
Any advice on fixing tho?
This looks like bashing Pansh
-
airsail
- Very Frequent Poster
- Posts: 692
- Joined: Mon Jun 22, 2009 8:57 am
- Weight: 80kg
- Local Beach: Queens Beach North, Queensland, Australia
- Favorite Beaches: Queens North, I don’t travel much
- Style: Foiling
- Gear: Sonic 3 15mtr, Soul 10 mtr, BRM Clouds 8, 6.2, 4.8, 3.7
Lift, Naish and Levitaz foils
Carbonco and home build boards
Ozone and Duotone wings
Naish Hover 95 foilboard
- Brand Affiliation: None
- Location: Australia
-
Has thanked:
342 times
-
Been thanked:
172 times
Postby airsail » Sun Apr 18, 2021 11:47 am
Find someone who can give you a quote, maybe Moti Levi, by the looks it could be a few hundred Oz dollars. Probably not worth fixing unless you can do it yourself. Pansh are cheap, probably not much more than the repair will cost you.
- These users thanked the author airsail for the post:
- downunder (Sun Apr 18, 2021 12:28 pm)
-
marlboroughman
- Very Frequent Poster
- Posts: 3368
- Joined: Thu Feb 08, 2007 5:12 pm
- Style: Oldschool
- Gear: Naish
- Brand Affiliation: Make Kiting Great Again!
- Location: CubaKiteLessons.com
-
Has thanked:
2 times
-
Been thanked:
61 times
-
Contact:
Postby marlboroughman » Sun Apr 18, 2021 10:50 pm
I would charge you $350 looking at those pics. Why so much? I am like a mechanic who hates BMWs. I will fix it but be ready to pay.
-
marlboroughman
- Very Frequent Poster
- Posts: 3368
- Joined: Thu Feb 08, 2007 5:12 pm
- Style: Oldschool
- Gear: Naish
- Brand Affiliation: Make Kiting Great Again!
- Location: CubaKiteLessons.com
-
Has thanked:
2 times
-
Been thanked:
61 times
-
Contact:
Postby marlboroughman » Sun Apr 18, 2021 10:54 pm
downunder wrote: ↑Sun Apr 18, 2021 3:23 am
Any advice on fixing tho?
Open trailing edge seam and it will become clear how these things are put together.
-
OzBungy
- Very Frequent Poster
- Posts: 2759
- Joined: Fri Oct 21, 2005 11:35 am
-
Has thanked:
6 times
-
Been thanked:
220 times
Postby OzBungy » Mon Apr 19, 2021 1:50 am
A tip. When doing the repair you want to avoid distorting the fabric. You can line up the pattern of the ripstop reinforcing threads so they make nice squares. You can also put in pen marks as way points.
Line up your way points and tack it together with small pieces of masking tape or ordinary household tape. You can then go ahead and tape the other side with spinnaker tape.
I used to oversew the edges of the tape, mainly to avoid peeling in contact with sand. I used a fairly long straight stitch.
-
merl
- Very Frequent Poster
- Posts: 764
- Joined: Tue May 15, 2007 8:43 pm
- Kiting since: 1999
- Gear: HF
- Brand Affiliation: None
- Location: Sweden
-
Has thanked:
108 times
-
Been thanked:
114 times
Postby merl » Mon Apr 19, 2021 12:50 pm
OzBungy wrote: ↑Mon Apr 19, 2021 1:50 am
A tip. When doing the repair you want to avoid distorting the fabric. You can line up the pattern of the ripstop reinforcing threads so they make nice squares. You can also put in pen marks as way points.
Line up your way points and tack it together with small pieces of masking tape or ordinary household tape. You can then go ahead and tape the other side with spinnaker tape.
I used to oversew the edges of the tape, mainly to avoid peeling in contact with sand. I used a fairly long straight stitch.
I can only repeat the trick I mentioned earlier, which in my opinion makes a huge difference to the ease of taping tears back together: a sticky board. Here is a picture of the insides of an zone race kite (no wonder that they break!). The brown packing take is sticky side up.
-
downunder
- Very Frequent Poster
- Posts: 2822
- Joined: Mon Jul 01, 2013 7:16 am
- Gear: building my own
- Brand Affiliation: None
- Location: Perth, Australia
-
Has thanked:
153 times
-
Been thanked:
161 times
Postby downunder » Mon Apr 19, 2021 3:42 pm
Cheers for the tip.
Interesting, I am not sure we have brown take that wide. Maybe I can make something up.
-
merl
- Very Frequent Poster
- Posts: 764
- Joined: Tue May 15, 2007 8:43 pm
- Kiting since: 1999
- Gear: HF
- Brand Affiliation: None
- Location: Sweden
-
Has thanked:
108 times
-
Been thanked:
114 times
Postby merl » Mon Apr 19, 2021 4:22 pm
downunder wrote: ↑Mon Apr 19, 2021 3:42 pm
Cheers for the tip.
Interesting, I am not sure we have brown take that wide. Maybe I can make something up.
This was my first experiment. Nowadays I just use lots of thin strips of double-sided basting tape (the kind that sailmakers use) which is better.
Return to “Gear Builders”
Who is online
Users browsing this forum: No registered users and 206 guests