Need advice on how to repair inflatable board seam which started leaking.
Suggestions please?
Inflatable board seam repair advice needed
-
grigorib
- Very Frequent Poster
- Posts: 4163
- Joined: Mon Aug 01, 2016 8:12 pm
- Kiting since: 2009
- Local Beach: OBX; Clinton Lake, IL; Lake Michigan; Hood River; La Ventana; Ocean Park, PR; SPI; Tawas, MI
- Gear: Kites: Slingshot Rally 5/7/9/11m, Turbine 9/13m, SST 4/5m, UFO 3/5/7/9m, Flysurfer Speed4 10m standard, Flysurfer 2cool 6m, Peter Lynn Venom II ARC 16m
Boards: Spleene RIP 37, Flysurfer Radical6 138, Flysurfer Flydoor5 XL, Slingshot/Moses/RDB 70/90/101cm masts with 1200/860/800/730/600 kitefoil or 2200/1700/1400 wingfoil wings and 310/230/425 stabilizers, Naish MicroChip 80cm, 36" Woody, Slingshot Dwarfcraft Micro 100, MBS Comp 95x
For sale: Slingshot Turbine 9/13m, 20” Guardian bar, 1700 sq.cm wing/fuselage/stabilizer fitting Moses mast
. - Brand Affiliation: None
- Has thanked: 468 times
- Been thanked: 696 times
-
Windigo1
- Very Frequent Poster
- Posts: 936
- Joined: Tue Jan 17, 2017 5:57 pm
- Style: Foil foil.. and Old School!
- Gear: Too many to list
- Brand Affiliation: None
- Has thanked: 63 times
- Been thanked: 217 times
Re: Inflatable board seam repair advice needed
I used Marine Goop successfully on a SUP but it was a pinhole a seam coming apart might be more tricky. Anyway it worked and never leaked again.
-
Trent hink
- Very Frequent Poster
- Posts: 1020
- Joined: Mon Jan 07, 2019 4:59 am
- Kiting since: 1998
- Weight: 83 kg.
- Local Beach: Nokomis beach, Turtle beach, Venice inlet, lido key
- Style: Creepy old man
- Gear: Peak4, LF, solo, Moses 633 hydrofoil, couple of surfboards, a twintip I made in 2008.
- Brand Affiliation: once made an attempt to manufacture and market "Anomaly" twin-tip boards.
- Has thanked: 314 times
- Been thanked: 254 times
Re: Inflatable board seam repair advice needed
Marine hardware stores sell specific products made to repair inflatable boats. Might be a good place to start.
-
airsail
- Very Frequent Poster
- Posts: 692
- Joined: Mon Jun 22, 2009 8:57 am
- Weight: 80kg
- Local Beach: Queens Beach North, Queensland, Australia
- Favorite Beaches: Queens North, I don’t travel much
- Style: Foiling
- Gear: Sonic 3 15mtr, Soul 10 mtr, BRM Clouds 8, 6.2, 4.8, 3.7
Lift, Naish and Levitaz foils
Carbonco and home build boards
Ozone and Duotone wings
Naish Hover 95 foilboard - Brand Affiliation: None
- Location: Australia
- Has thanked: 342 times
- Been thanked: 172 times
Re: Inflatable board seam repair advice needed
Really depends on the age of the board. The seam adhesive deteriorates over time depending on how the board is stored, hot conditions will make it fail quicker. 0-5 years old, try and repair the seam, after that the board is on borrowed time. Once the adhesive deteriorates it’s like playing wack-a-mole, fix one leak and another appears.
- Rating: 3.03%
Who is online
Users browsing this forum: No registered users and 208 guests