Contact   Imprint   Advertising   Guidelines


A forum dedicated to Hydrofoil riders
Very Frequent Poster
Posts: 3582
Joined: Thu Jun 05, 2003 3:37 am
Has thanked: 0
Been thanked: 19 times


Postby BWD » Fri Jul 13, 2018 1:49 am

I am interested in getting a carbon foil.
I like my Al one but it’s heavy and the wing options are limited.
I ride often in dark or murky water, and live in the south, where the sun is hot.
I want my foil visible, and cool.
If I buy one that only comes in black, what are good painting options?
I don’t mind taking a little care, and anticipate needing touch ups from time to time.
What are good options for diy, and relatively safe for me (and the gear) to apply?
Grateful for any knowledgeable suggestions...

Frequent Poster
Posts: 495
Joined: Tue Mar 24, 2015 7:28 pm
Kiting since: 2014
Local Beach: Cherry Beach, Toronto
Gear: Flysurfer
Moses Hydrofoil
Brand Affiliation: None
Has thanked: 0
Been thanked: 13 times

Re: Paint

Postby cwood » Fri Jul 13, 2018 2:21 am

Any spray can paint would be fine. Do a light sanding first for better adhesion and then thin coats. If you wet sand the paint its like a fairing compound to some degree so you can get it very smooth.

Very Frequent Poster
Posts: 3582
Joined: Thu Jun 05, 2003 3:37 am
Has thanked: 0
Been thanked: 19 times

Re: Paint

Postby BWD » Fri Jul 13, 2018 5:56 am

But it has to be fancy paint to cover up that expensive carbon! :lol: :lol: :lol:

Very Frequent Poster
Posts: 2954
Joined: Wed Oct 05, 2005 6:43 pm
Kiting since: 2001
Local Beach: Vejbystrand, Habo Ljung, Lomma
Gear: TW Surfboards 5-0
TW Surfboards hydrofoil board 90,105,110cm
Moses Fluente 550/590 + 330/325 and 633 se
Ozone Hyperlink 9mUL, 7m
Hyperlink V2 13m
Concept Air Wave 4,5m
Brand Affiliation: None
Location: Sweden
Has thanked: 19 times
Been thanked: 53 times

Re: Paint

Postby TomW » Fri Jul 13, 2018 9:43 am

A basic light grey primer paint in a can. By some denatured alcohol, disposabe latex gloves and some papertowels plus a sheet of 400 & 800 g wet dry sandpaper.
Wet sand first with 800g. Just to Matt it.
Wash off, dry. Clean with DNA.
Spray 3-4 light coats, dry 5 min between.
Dry overnight.
Wet sand with 400-800g.

Touch up as it wears off.

I find this lets me see minoor damage easier and I can touch up and fix before damage affect riding.

Mossy 757
Very Frequent Poster
Posts: 1689
Joined: Fri Sep 11, 2015 5:10 pm
Kiting since: 2013
Local Beach: First Landing State Park, Virginia Beach Oceanfront
Style: Kitefoil
Gear: Delta Hydrofoil and board. Cabrinha Velocity 9m, Flysurfer Sonic2 11m, Ozone R1V2 15m
Has thanked: 15 times
Been thanked: 21 times

Re: Paint

Postby Mossy 757 » Fri Jul 13, 2018 2:34 pm

yeah, regular old rattle can primer is the way to go. It comes in tons of colors now, but grey is pretty easy to see as it creates a nice contrast with water. TomW hit the nail on the head in terms of process, but I'd personally work all the way up to 1k/1500 grit for a racier finish; not necessary for freeride.

Return to “Hydrofoil”

Who is online

Users browsing this forum: Flyboy, magnusod, Sbrinckman and 8 guests