Contact   Imprint   Advertising   Guidelines

Onda 633 with smaller SS Dwarfcraft board?

A forum dedicated to Hydrofoil riders
kriskris
Rare Poster
Posts: 31
Joined: Wed Nov 21, 2012 1:32 am
Brand Affiliation: None
Has thanked: 0
Been thanked: 0

Onda 633 with smaller SS Dwarfcraft board?

Postby kriskris » Sat Jul 28, 2018 11:53 pm

So I read so much about Onda 633 that I am thinking about getting it for my ocean sessions in small surf. I ride older foil with smaller 42 inch Slingshot dwarfcraft board. I read about increased foot pressure hence my question: is this combination going to work or will I have to get different board? thanks, Kris

oregonkiter
Medium Poster
Posts: 138
Joined: Mon Sep 11, 2017 2:26 pm
Style: foil
Gear: Foil stuff
Brand Affiliation: None
Has thanked: 0
Been thanked: 11 times

Re: Onda 633 with smaller SS Dwarfcraft board?

Postby oregonkiter » Sun Jul 29, 2018 4:28 am

I ride the short DC with the 633 wing. It's great! It needs to go ALL the way back. My buddy also rides this same setup.

Fun

grigorib
Very Frequent Poster
Posts: 2109
Joined: Mon Aug 01, 2016 8:12 pm
Local Beach: OBX; Clinton Lake, IL; Lake Michigan; Tawas, MI; SPI; La Ventana
Gear: Kites: Slingshot Rally 5/7/9/11m, SST 5m, Turbine 9m, Flysurfer Speed4 10m standard, Peter Lynn Venom II ARC 16m
Boards: Spleene RIP 37, Flysurfer Radical6 138, Flysurfer Flydoor5 XL, Slingshot/Moses 80/91/105cm masts with 590/330 695/425 683s/450 wingsets, Tim's 36" "woody", Slingshot Micro 3'6", MBS Comp 95x

For sale: Slingshot SST 6m 2018 $480, Slingshot RPM 11m 2018 $600, Core XR4 10m $900, Core XR4 13.5m $980, Core XR4 17m $1075, Slingshot Turbine 5m 2017 like new $450, BROkite carbon board 140x44cm like new complete $650, Slingshot Rally 6m 2017 like new $530, 2019 Slingshot Guardian 17" brand new $260, 2018 Slingshot Guardian 20" bar $190
.
Brand Affiliation: None
Has thanked: 128 times
Been thanked: 151 times

Re: Onda 633 with smaller SS Dwarfcraft board?

Postby grigorib » Sun Jul 29, 2018 7:58 pm

Works fine for me. 633 and 42” Dwarfcraft 2016. Pedestal is set to “4” mark on the board

kriskris
Rare Poster
Posts: 31
Joined: Wed Nov 21, 2012 1:32 am
Brand Affiliation: None
Has thanked: 0
Been thanked: 0

Re: Onda 633 with smaller SS Dwarfcraft board?

Postby kriskris » Tue Jul 31, 2018 2:00 am

Thank you guys

trod27
Medium Poster
Posts: 65
Joined: Sat Jun 23, 2012 4:36 pm
Local Beach: Utah
Favorite Beaches: Gorge, Los Barilles, Deer Creek
Style: freestyle
Gear: Slingshot, Moses
Brand Affiliation: None
Has thanked: 0
Been thanked: 3 times

Re: Onda 633 with smaller SS Dwarfcraft board?

Postby trod27 » Sun Nov 18, 2018 5:46 pm

I have been riding the 590 on the DC 3'6". I ride it at around 3 to 4 at back of pedestal. I ride strapless. I am getting a new GW 91 v2 with 633. Where should I mount it? I read Oregon kiter said put it all the way back. Is that far enough?
I ask because I wont get chance to ride before Baja. Will I need to go back further? I had to drill my GW 91 pedestal for my other board that only has mount holes. Not sure I will need to do this, just looking for feedback.

grigorib
Very Frequent Poster
Posts: 2109
Joined: Mon Aug 01, 2016 8:12 pm
Local Beach: OBX; Clinton Lake, IL; Lake Michigan; Tawas, MI; SPI; La Ventana
Gear: Kites: Slingshot Rally 5/7/9/11m, SST 5m, Turbine 9m, Flysurfer Speed4 10m standard, Peter Lynn Venom II ARC 16m
Boards: Spleene RIP 37, Flysurfer Radical6 138, Flysurfer Flydoor5 XL, Slingshot/Moses 80/91/105cm masts with 590/330 695/425 683s/450 wingsets, Tim's 36" "woody", Slingshot Micro 3'6", MBS Comp 95x

For sale: Slingshot SST 6m 2018 $480, Slingshot RPM 11m 2018 $600, Core XR4 10m $900, Core XR4 13.5m $980, Core XR4 17m $1075, Slingshot Turbine 5m 2017 like new $450, BROkite carbon board 140x44cm like new complete $650, Slingshot Rally 6m 2017 like new $530, 2019 Slingshot Guardian 17" brand new $260, 2018 Slingshot Guardian 20" bar $190
.
Brand Affiliation: None
Has thanked: 128 times
Been thanked: 151 times

Re: Onda 633 with smaller SS Dwarfcraft board?

Postby grigorib » Sun Nov 18, 2018 6:06 pm

trod27 wrote:
Sun Nov 18, 2018 5:46 pm
I have been riding the 590 on the DC 3'6". I ride it at around 3 to 4 at back of pedestal. I ride strapless. I am getting a new GW 91 v2 with 633. Where should I mount it? I read Oregon kiter said put it all the way back. Is that far enough?
I ask because I wont get chance to ride before Baja. Will I need to go back further? I had to drill my GW 91 pedestal for my other board that only has mount holes. Not sure I will need to do this, just looking for feedback.
2016/2017/2018 Dwarfcrafts are different in regard of kicker and tracks position. I ride strapless with my rear foot big toe over back mast plate bolt (with 590). With 633 I move the mast back by 1” so my back foot stands right over rear mast plate bolt.
Last edited by grigorib on Sun Nov 18, 2018 6:26 pm, edited 1 time in total.

Flag53
Frequent Poster
Posts: 247
Joined: Fri Sep 16, 2016 5:19 pm
Local Beach: Rhosneigr
Favorite Beaches: Rhosneigr

Cayo guiermo
Style: Mixed
Gear: Mixed
Brand Affiliation: None
Has thanked: 0
Been thanked: 5 times

Re: Onda 633 with smaller SS Dwarfcraft board?

Postby Flag53 » Sun Nov 18, 2018 6:15 pm

Hi Kriskris,

Don’t forget if you mount the Onda 633 as far back as possible and there’s still too much front foot pressure then you can always Shimm the Mast / Fuselage connection .

It’s easy to do and reduces the front pressure .

grigorib
Very Frequent Poster
Posts: 2109
Joined: Mon Aug 01, 2016 8:12 pm
Local Beach: OBX; Clinton Lake, IL; Lake Michigan; Tawas, MI; SPI; La Ventana
Gear: Kites: Slingshot Rally 5/7/9/11m, SST 5m, Turbine 9m, Flysurfer Speed4 10m standard, Peter Lynn Venom II ARC 16m
Boards: Spleene RIP 37, Flysurfer Radical6 138, Flysurfer Flydoor5 XL, Slingshot/Moses 80/91/105cm masts with 590/330 695/425 683s/450 wingsets, Tim's 36" "woody", Slingshot Micro 3'6", MBS Comp 95x

For sale: Slingshot SST 6m 2018 $480, Slingshot RPM 11m 2018 $600, Core XR4 10m $900, Core XR4 13.5m $980, Core XR4 17m $1075, Slingshot Turbine 5m 2017 like new $450, BROkite carbon board 140x44cm like new complete $650, Slingshot Rally 6m 2017 like new $530, 2019 Slingshot Guardian 17" brand new $260, 2018 Slingshot Guardian 20" bar $190
.
Brand Affiliation: None
Has thanked: 128 times
Been thanked: 151 times

Re: Onda 633 with smaller SS Dwarfcraft board?

Postby grigorib » Sun Nov 18, 2018 6:32 pm

You might not need to go full way back with the mast. With 633 on 2016 Dwarfcraft 42” I set mine this way and I still have 1.5” space to move the mast back
Attachments
AF143966-07A4-47A8-AB57-334D8C84C05E.jpeg
Last edited by grigorib on Sun Nov 18, 2018 6:39 pm, edited 1 time in total.

trod27
Medium Poster
Posts: 65
Joined: Sat Jun 23, 2012 4:36 pm
Local Beach: Utah
Favorite Beaches: Gorge, Los Barilles, Deer Creek
Style: freestyle
Gear: Slingshot, Moses
Brand Affiliation: None
Has thanked: 0
Been thanked: 3 times

Re: Onda 633 with smaller SS Dwarfcraft board?

Postby trod27 » Sun Nov 18, 2018 6:36 pm

Grig. Awesome the photo is the 633? That is where I ride my 590 on 2019 DC 3'6". Tells me I will be fine without shimming and if I do need to go back I can?

TomW
Very Frequent Poster
Posts: 3123
Joined: Wed Oct 05, 2005 6:43 pm
Local Beach: Vejbystrand, Habo Ljung, Lomma
Gear: TW Surfboards 5-0
TW Surfboards hydrofoil board 90,105,110cm
Moses Fluente 550/590 + 330/325 and 633 se
Ozone Hyperlink 9mUL, 7m
Hyperlink V2 13m
Concept Air Wave 4,5m
Brand Affiliation: None
Location: Sweden
Has thanked: 28 times
Been thanked: 74 times

Re: Onda 633 with smaller SS Dwarfcraft board?

Postby TomW » Sun Nov 18, 2018 6:41 pm

Check out these photos of me on the 633 for foot position. Downwind I'm about 100mm more forward with front foot. I have the 2016 fluente mast that sweeps back 50mm.
_20181118_171556.JPG
_20181118_171513.JPG
_20181118_171926.JPG


Return to “Hydrofoil”

Who is online

Users browsing this forum: bragnouff, jakemoore, jyka, norcom, tautologies, tomtom and 7 guests