Contact   Imprint   Advertising   Guidelines

Onda 633 with smaller SS Dwarfcraft board?

A forum dedicated to Hydrofoil riders
kriskris
Medium Poster
Posts: 61
Joined: Wed Nov 21, 2012 1:32 am
Kiting since: 2003
Weight: 162
Local Beach: Crack Park
Style: Foil
Gear: 633 Onda/42" Dwarfcraft, Peak4 5m, Core Section 6m, 9m
Brand Affiliation: None
Location: Satellite Beach, FL
Has thanked: 11 times
Been thanked: 1 time

Onda 633 with smaller SS Dwarfcraft board?

Postby kriskris » Sat Jul 28, 2018 11:53 pm

So I read so much about Onda 633 that I am thinking about getting it for my ocean sessions in small surf. I ride older foil with smaller 42 inch Slingshot dwarfcraft board. I read about increased foot pressure hence my question: is this combination going to work or will I have to get different board? thanks, Kris

oregonkiter
Frequent Poster
Posts: 205
Joined: Mon Sep 11, 2017 2:26 pm
Style: foil
Gear: Foil stuff
Brand Affiliation: None
Has thanked: 4 times
Been thanked: 35 times

Re: Onda 633 with smaller SS Dwarfcraft board?

Postby oregonkiter » Sun Jul 29, 2018 4:28 am

I ride the short DC with the 633 wing. It's great! It needs to go ALL the way back. My buddy also rides this same setup.

Fun

grigorib
Very Frequent Poster
Posts: 2677
Joined: Mon Aug 01, 2016 8:12 pm
Kiting since: 2009
Local Beach: OBX; Clinton Lake, IL; Lake Michigan; La Ventana; SPI; Hood River; Tawas, MI
Gear: Kites: Slingshot Rally 5/7/9/11m, Turbine 9m, SST 4/5/7m, UFO 5/7/9m, Flysurfer Speed4 10m standard, Peter Lynn Venom II ARC 16m

Boards: Spleene RIP 37, Flysurfer Radical6 138, Flysurfer Flydoor5 XL, Slingshot/Moses 80/82/91/101cm masts with 800/425 695/425 637/420 1000/421 wingsets, 36" Woody, Slingshot Dwarfcraft Micro 3'6" 2019-2020, MBS Comp 95x

For sale: Moses 80cm alu mast $260
.
Brand Affiliation: None
Has thanked: 224 times
Been thanked: 330 times

Re: Onda 633 with smaller SS Dwarfcraft board?

Postby grigorib » Sun Jul 29, 2018 7:58 pm

Works fine for me. 633 and 42” Dwarfcraft 2016. Pedestal is set to “4” mark on the board

kriskris
Medium Poster
Posts: 61
Joined: Wed Nov 21, 2012 1:32 am
Kiting since: 2003
Weight: 162
Local Beach: Crack Park
Style: Foil
Gear: 633 Onda/42" Dwarfcraft, Peak4 5m, Core Section 6m, 9m
Brand Affiliation: None
Location: Satellite Beach, FL
Has thanked: 11 times
Been thanked: 1 time

Re: Onda 633 with smaller SS Dwarfcraft board?

Postby kriskris » Tue Jul 31, 2018 2:00 am

Thank you guys

trod27
Medium Poster
Posts: 73
Joined: Sat Jun 23, 2012 4:36 pm
Local Beach: Utah
Favorite Beaches: Gorge, Los Barilles, Deer Creek
Style: freestyle
Gear: Slingshot, Moses
Brand Affiliation: None
Has thanked: 0
Been thanked: 5 times

Re: Onda 633 with smaller SS Dwarfcraft board?

Postby trod27 » Sun Nov 18, 2018 5:46 pm

I have been riding the 590 on the DC 3'6". I ride it at around 3 to 4 at back of pedestal. I ride strapless. I am getting a new GW 91 v2 with 633. Where should I mount it? I read Oregon kiter said put it all the way back. Is that far enough?
I ask because I wont get chance to ride before Baja. Will I need to go back further? I had to drill my GW 91 pedestal for my other board that only has mount holes. Not sure I will need to do this, just looking for feedback.

grigorib
Very Frequent Poster
Posts: 2677
Joined: Mon Aug 01, 2016 8:12 pm
Kiting since: 2009
Local Beach: OBX; Clinton Lake, IL; Lake Michigan; La Ventana; SPI; Hood River; Tawas, MI
Gear: Kites: Slingshot Rally 5/7/9/11m, Turbine 9m, SST 4/5/7m, UFO 5/7/9m, Flysurfer Speed4 10m standard, Peter Lynn Venom II ARC 16m

Boards: Spleene RIP 37, Flysurfer Radical6 138, Flysurfer Flydoor5 XL, Slingshot/Moses 80/82/91/101cm masts with 800/425 695/425 637/420 1000/421 wingsets, 36" Woody, Slingshot Dwarfcraft Micro 3'6" 2019-2020, MBS Comp 95x

For sale: Moses 80cm alu mast $260
.
Brand Affiliation: None
Has thanked: 224 times
Been thanked: 330 times

Re: Onda 633 with smaller SS Dwarfcraft board?

Postby grigorib » Sun Nov 18, 2018 6:06 pm

trod27 wrote:
Sun Nov 18, 2018 5:46 pm
I have been riding the 590 on the DC 3'6". I ride it at around 3 to 4 at back of pedestal. I ride strapless. I am getting a new GW 91 v2 with 633. Where should I mount it? I read Oregon kiter said put it all the way back. Is that far enough?
I ask because I wont get chance to ride before Baja. Will I need to go back further? I had to drill my GW 91 pedestal for my other board that only has mount holes. Not sure I will need to do this, just looking for feedback.
2016/2017/2018 Dwarfcrafts are different in regard of kicker and tracks position. I ride strapless with my rear foot big toe over back mast plate bolt (with 590). With 633 I move the mast back by 1” so my back foot stands right over rear mast plate bolt.
Last edited by grigorib on Sun Nov 18, 2018 6:26 pm, edited 1 time in total.

Flag53
Frequent Poster
Posts: 261
Joined: Fri Sep 16, 2016 5:19 pm
Local Beach: Rhosneigr
Favorite Beaches: Rhosneigr

Cayo guiermo
Style: Mixed
Gear: Mixed
Brand Affiliation: None
Has thanked: 0
Been thanked: 5 times

Re: Onda 633 with smaller SS Dwarfcraft board?

Postby Flag53 » Sun Nov 18, 2018 6:15 pm

Hi Kriskris,

Don’t forget if you mount the Onda 633 as far back as possible and there’s still too much front foot pressure then you can always Shimm the Mast / Fuselage connection .

It’s easy to do and reduces the front pressure .

grigorib
Very Frequent Poster
Posts: 2677
Joined: Mon Aug 01, 2016 8:12 pm
Kiting since: 2009
Local Beach: OBX; Clinton Lake, IL; Lake Michigan; La Ventana; SPI; Hood River; Tawas, MI
Gear: Kites: Slingshot Rally 5/7/9/11m, Turbine 9m, SST 4/5/7m, UFO 5/7/9m, Flysurfer Speed4 10m standard, Peter Lynn Venom II ARC 16m

Boards: Spleene RIP 37, Flysurfer Radical6 138, Flysurfer Flydoor5 XL, Slingshot/Moses 80/82/91/101cm masts with 800/425 695/425 637/420 1000/421 wingsets, 36" Woody, Slingshot Dwarfcraft Micro 3'6" 2019-2020, MBS Comp 95x

For sale: Moses 80cm alu mast $260
.
Brand Affiliation: None
Has thanked: 224 times
Been thanked: 330 times

Re: Onda 633 with smaller SS Dwarfcraft board?

Postby grigorib » Sun Nov 18, 2018 6:32 pm

You might not need to go full way back with the mast. With 633 on 2016 Dwarfcraft 42” I set mine this way and I still have 1.5” space to move the mast back
Attachments
AF143966-07A4-47A8-AB57-334D8C84C05E.jpeg
Last edited by grigorib on Sun Nov 18, 2018 6:39 pm, edited 1 time in total.

trod27
Medium Poster
Posts: 73
Joined: Sat Jun 23, 2012 4:36 pm
Local Beach: Utah
Favorite Beaches: Gorge, Los Barilles, Deer Creek
Style: freestyle
Gear: Slingshot, Moses
Brand Affiliation: None
Has thanked: 0
Been thanked: 5 times

Re: Onda 633 with smaller SS Dwarfcraft board?

Postby trod27 » Sun Nov 18, 2018 6:36 pm

Grig. Awesome the photo is the 633? That is where I ride my 590 on 2019 DC 3'6". Tells me I will be fine without shimming and if I do need to go back I can?

TomW
Very Frequent Poster
Posts: 3551
Joined: Wed Oct 05, 2005 6:43 pm
Kiting since: 2001
Local Beach: Vejbystrand, Lomma
Gear: TW Surfboards hydrofoil board 110
Gong Veloce M, 100cm carbon mast
Ozone Hyperlink V1 7m
Hyperlink V2 9m, 13m
Concept Air Wave 4,5m
Brand Affiliation: None
Location: Sweden
Has thanked: 51 times
Been thanked: 180 times

Re: Onda 633 with smaller SS Dwarfcraft board?

Postby TomW » Sun Nov 18, 2018 6:41 pm

Check out these photos of me on the 633 for foot position. Downwind I'm about 100mm more forward with front foot. I have the 2016 fluente mast that sweeps back 50mm.
_20181118_171556.JPG
_20181118_171513.JPG
_20181118_171926.JPG


Return to “Hydrofoil”

Who is online

Users browsing this forum: No registered users and 7 guests