Contact   Imprint   Advertising   Guidelines

Onda 633 with smaller SS Dwarfcraft board?

A forum dedicated to Hydrofoil riders
grigorib
Very Frequent Poster
Posts: 1552
Joined: Mon Aug 01, 2016 8:12 pm
Kiting since: 2009
Local Beach: OBX; Clinton Lake, IL; Lake Michigan; Tawas, MI; SPI; La Ventana
Gear: Kites: Slingshot Rally 5/7/9/11m, Slingshot Turbine 9m, Flysurfer Speed4 10m, Peter Lynn Venom II ARC 16m
Boards: Spleene RIP 37, Flysurfer Flydoor5 XL, Slingshot/Moses 80/91/105cm masts 590/683s/633 wings, Tim's 36" "woody", Slingshot Dwarfcraft 42", MBS Comp 95x

For sale: LF CPR 55cm bar $160
Brand Affiliation: None
Has thanked: 36 times
Been thanked: 62 times

Re: Onda 633 with smaller SS Dwarfcraft board?

Postby grigorib » Fri Nov 30, 2018 5:48 am

Anyone to comment on 683s vs 590 please?
It’s be nice to use one fuselage only and two different front wings

Foil
Very Frequent Poster
Posts: 659
Joined: Mon Oct 23, 2017 7:44 pm
Kiting since: 2001
Local Beach: Newbrighton near Liverpool
Favorite Beaches: Flag beach for the Foil, Rhosneigr for the Foil and twintip.
Style: improving foiler.
Gear: Moses T38 full carbon Ltd edition (number 3)
2019 Groove Skates, 120 + 130 both full naked carbon with gold stripes
101cm Moses Carbon mast
71+90cm Slingshot masts with moses adaptor
Moses- 633 wing set
Moses - 683s wing set
Ozone V4 Reo 6/7/8/9
Ozone Alpha V1 10/12
Nobile 50/50 twin tip
North 2018 click bars with Q power lines
massive grin
Brand Affiliation: None
Has thanked: 21 times
Been thanked: 47 times

Re: Onda 633 with smaller SS Dwarfcraft board?

Postby Foil » Fri Nov 30, 2018 12:34 pm

Those wings sit on different fuses, not interchangeable.
633 and 683 same thicker fuse.
590 on standard thinner fuse

grigorib
Very Frequent Poster
Posts: 1552
Joined: Mon Aug 01, 2016 8:12 pm
Kiting since: 2009
Local Beach: OBX; Clinton Lake, IL; Lake Michigan; Tawas, MI; SPI; La Ventana
Gear: Kites: Slingshot Rally 5/7/9/11m, Slingshot Turbine 9m, Flysurfer Speed4 10m, Peter Lynn Venom II ARC 16m
Boards: Spleene RIP 37, Flysurfer Flydoor5 XL, Slingshot/Moses 80/91/105cm masts 590/683s/633 wings, Tim's 36" "woody", Slingshot Dwarfcraft 42", MBS Comp 95x

For sale: LF CPR 55cm bar $160
Brand Affiliation: None
Has thanked: 36 times
Been thanked: 62 times

Re: Onda 633 with smaller SS Dwarfcraft board?

Postby grigorib » Fri Nov 30, 2018 3:15 pm

Foil wrote:
Fri Nov 30, 2018 12:34 pm
Those wings sit on different fuses, not interchangeable.
633 and 683 same thicker fuse.
590 on standard thinner fuse
Exactly! And having a 590 with 647 fuselage and 633 on 749 fuselage, hauling around one-too-many extra fuselage and stabilizer makes me think that I might want to ditch whole 590 setup (I don’t race so no 637 wing in my quiver) and use 749 fuselage with 633 and 683s instead.

The question is - is 683s a good replacement for 590 or I’ll be missing out on speed a lot?
( I don’t boost with a foil, so that’s not a factor)

Foil
Very Frequent Poster
Posts: 659
Joined: Mon Oct 23, 2017 7:44 pm
Kiting since: 2001
Local Beach: Newbrighton near Liverpool
Favorite Beaches: Flag beach for the Foil, Rhosneigr for the Foil and twintip.
Style: improving foiler.
Gear: Moses T38 full carbon Ltd edition (number 3)
2019 Groove Skates, 120 + 130 both full naked carbon with gold stripes
101cm Moses Carbon mast
71+90cm Slingshot masts with moses adaptor
Moses- 633 wing set
Moses - 683s wing set
Ozone V4 Reo 6/7/8/9
Ozone Alpha V1 10/12
Nobile 50/50 twin tip
North 2018 click bars with Q power lines
massive grin
Brand Affiliation: None
Has thanked: 21 times
Been thanked: 47 times

Re: Onda 633 with smaller SS Dwarfcraft board?

Postby Foil » Fri Nov 30, 2018 6:59 pm

grigorib wrote:
Fri Nov 30, 2018 3:15 pm
Foil wrote:
Fri Nov 30, 2018 12:34 pm
Those wings sit on different fuses, not interchangeable.
633 and 683 same thicker fuse.
590 on standard thinner fuse
Exactly! And having a 590 with 647 fuselage and 633 on 749 fuselage, hauling around one-too-many extra fuselage and stabilizer makes me think that I might want to ditch whole 590 setup (I don’t race so no 637 wing in my quiver) and use 749 fuselage with 633 and 683s instead.

The question is - is 683s a good replacement for 590 or I’ll be missing out on speed a lot?
( I don’t boost with a foil, so that’s not a factor)
I see.
from my experience the 637 race set up on the thinner fuse is a must try before you dump your thin fuse,
its the best wing set I have tried for sheer speed with stability, it has great lift, and the bonus is it can be used on the same mast setting as the 633, so no need to get the spanners out.
it really is a gem, much easier to use than the other traditional Moses wings, which is quite mad!
smooth linear lift and flight at silly speed, with upwind angles that make you grin like an idiot.

TomW
Very Frequent Poster
Posts: 2886
Joined: Wed Oct 05, 2005 6:43 pm
Kiting since: 2001
Local Beach: Vejbystrand, Habo Ljung, Lomma
Gear: TW Surfboards 5-0
TW Surfboards hydrofoil board 120 and 135
Moses Fluente 550/590 + 330/325 and 633 set
North Mono 7, 9, 12
Ozone Reo 5
Ozone Hyperlink 9mUL, 7m
Flysurfer Sonic 2 13m
Brand Affiliation: None
Location: Sweden
Has thanked: 14 times
Been thanked: 41 times

Re: Onda 633 with smaller SS Dwarfcraft board?

Postby TomW » Fri Nov 30, 2018 7:42 pm

Hej Foil,

I might have to get a new mast this coming season. I'm riding 2016 fluente 93cm mast with 633. Came from 550-590. Don't use them.

My thought was to get Vorace 101 with 637 wings and then bolt the 633 to the Vorace mast.
Do you think it's better to go up to 101 than down to 91 fluente? Consider I'll use 633 80% and 637 20%.
Alternative is to get the fluente 91 mast.

I don’t kite in shallow water, but our spots often require dragging out in side onshore through wind waves further out to get beyond sandbars. I'm confidently doing flying transitions and footswitchs on 633/fluente 93.

So question is: get Vorace with 637 wings or just get a new fluente mast....

Foil
Very Frequent Poster
Posts: 659
Joined: Mon Oct 23, 2017 7:44 pm
Kiting since: 2001
Local Beach: Newbrighton near Liverpool
Favorite Beaches: Flag beach for the Foil, Rhosneigr for the Foil and twintip.
Style: improving foiler.
Gear: Moses T38 full carbon Ltd edition (number 3)
2019 Groove Skates, 120 + 130 both full naked carbon with gold stripes
101cm Moses Carbon mast
71+90cm Slingshot masts with moses adaptor
Moses- 633 wing set
Moses - 683s wing set
Ozone V4 Reo 6/7/8/9
Ozone Alpha V1 10/12
Nobile 50/50 twin tip
North 2018 click bars with Q power lines
massive grin
Brand Affiliation: None
Has thanked: 21 times
Been thanked: 47 times

Re: Onda 633 with smaller SS Dwarfcraft board?

Postby Foil » Sat Dec 01, 2018 12:54 pm

2 of us on our beach now use 101 masts with the 633 100% of the time,(and for me the 637 race wings when conditions are good for speed)
I had the 90cm fluente mast and when I started using the 101 I never went back to the 90cm or the 71cm which I also owned, the 71cm I sold straight away and the 90cm a few months later after just using it one last time to see if it offered anything better for me.
My buddy still has his 93 cm curved moses 2016 mast as a spare, but never uses it and loves the 101 mast on the 633 like I do, I have bought a spare 101 mast which is bit of a waste really as I cant see why or how I would ever need to use it, mind you I have 2 Moses 128 ltd boards, and just bought the new naked Groove carbon skate.
I can feel the need to sell some gear.

TomW
Very Frequent Poster
Posts: 2886
Joined: Wed Oct 05, 2005 6:43 pm
Kiting since: 2001
Local Beach: Vejbystrand, Habo Ljung, Lomma
Gear: TW Surfboards 5-0
TW Surfboards hydrofoil board 120 and 135
Moses Fluente 550/590 + 330/325 and 633 set
North Mono 7, 9, 12
Ozone Reo 5
Ozone Hyperlink 9mUL, 7m
Flysurfer Sonic 2 13m
Brand Affiliation: None
Location: Sweden
Has thanked: 14 times
Been thanked: 41 times

Re: Onda 633 with smaller SS Dwarfcraft board?

Postby TomW » Sat Dec 01, 2018 4:56 pm

Thanks foil. Why is 101 better than 91cm?

grigorib
Very Frequent Poster
Posts: 1552
Joined: Mon Aug 01, 2016 8:12 pm
Kiting since: 2009
Local Beach: OBX; Clinton Lake, IL; Lake Michigan; Tawas, MI; SPI; La Ventana
Gear: Kites: Slingshot Rally 5/7/9/11m, Slingshot Turbine 9m, Flysurfer Speed4 10m, Peter Lynn Venom II ARC 16m
Boards: Spleene RIP 37, Flysurfer Flydoor5 XL, Slingshot/Moses 80/91/105cm masts 590/683s/633 wings, Tim's 36" "woody", Slingshot Dwarfcraft 42", MBS Comp 95x

For sale: LF CPR 55cm bar $160
Brand Affiliation: None
Has thanked: 36 times
Been thanked: 62 times

Re: Onda 633 with smaller SS Dwarfcraft board?

Postby grigorib » Sat Dec 01, 2018 5:31 pm

TomW wrote:
Sat Dec 01, 2018 4:56 pm
Thanks foil. Why is 101 better than 91cm?
More edging. Flying high :)
For deep water my 105cm is the only choice. I used 71cm for shallows and was missing edging. Sold 71cm and waiting for 81cm to become available.

Alvaro
Medium Poster
Posts: 61
Joined: Thu Mar 11, 2004 9:20 pm
Has thanked: 0
Been thanked: 0

Re: Onda 633 with smaller SS Dwarfcraft board?

Postby Alvaro » Sun Dec 02, 2018 8:51 pm

I just got my new DC 3’6 and when trying to assemble my 2017 Fluente mast on it, the bolts that came with the board are too short, they don’t reach through the mast base holes, through the rack, and on to the T-nuts.
Has anyone had the same issue? How large are the bolts you are using, any advice?

Thank you

grigorib
Very Frequent Poster
Posts: 1552
Joined: Mon Aug 01, 2016 8:12 pm
Kiting since: 2009
Local Beach: OBX; Clinton Lake, IL; Lake Michigan; Tawas, MI; SPI; La Ventana
Gear: Kites: Slingshot Rally 5/7/9/11m, Slingshot Turbine 9m, Flysurfer Speed4 10m, Peter Lynn Venom II ARC 16m
Boards: Spleene RIP 37, Flysurfer Flydoor5 XL, Slingshot/Moses 80/91/105cm masts 590/683s/633 wings, Tim's 36" "woody", Slingshot Dwarfcraft 42", MBS Comp 95x

For sale: LF CPR 55cm bar $160
Brand Affiliation: None
Has thanked: 36 times
Been thanked: 62 times

Re: Onda 633 with smaller SS Dwarfcraft board?

Postby grigorib » Mon Dec 03, 2018 12:37 am

Alvaro wrote:
Sun Dec 02, 2018 8:51 pm
I just got my new DC 3’6 and when trying to assemble my 2017 Fluente mast on it, the bolts that came with the board are too short, they don’t reach through the mast base holes, through the rack, and on to the T-nuts.
Has anyone had the same issue? How large are the bolts you are using, any advice?

Thank you
Bolts which come with the board are countersink and aren’t good for Moses mast. Get stainless M8x30 buttonhead or panhead bolts (Phillips/Allen)


Return to “Hydrofoil”

Who is online

Users browsing this forum: Kamikuza, qba-epp11, vman and 8 guests

cron