Contact   Imprint   Advertising   Guidelines

Moses SABfoil

A forum dedicated to Hydrofoil riders
max
Very Frequent Poster
Posts: 653
Joined: Thu Aug 01, 2002 1:00 am
Has thanked: 9 times
Been thanked: 11 times

Re: Moses 2019

Postby max » Mon May 27, 2019 3:02 am

grigorib wrote:
Mon May 27, 2019 2:55 am
max wrote:
Sun May 26, 2019 10:41 pm
...
so if the 450 is not shimmed, how does the front foot position change in comparison to using the 483?

and how does the 450 change the ride . . . slower to faster, more carvy or less, and . . . ?
If 450 is not shimmed you’d need to step forward couple of inches or move mast back which I can’t do on either 36” woody nor 42” Micro boards

450 feels about same as 483 - I don’t think think it changes the ride. Great setup, don’t forget to shim it though

thanks for that . . . I do not think that it is what I am looking for s keen to hear about how it goes with the smaller stab.

grigorib
Very Frequent Poster
Posts: 4146
Joined: Mon Aug 01, 2016 8:12 pm
Kiting since: 2009
Local Beach: OBX; Clinton Lake, IL; Lake Michigan; Hood River; La Ventana; Ocean Park, PR; SPI; Tawas, MI
Gear: Kites: Slingshot Rally 5/7/9/11m, Turbine 9/13m, SST 4/5m, UFO 3/5/7/9m, Flysurfer Speed4 10m standard, Flysurfer 2cool 6m, Peter Lynn Venom II ARC 16m

Boards: Spleene RIP 37, Flysurfer Radical6 138, Flysurfer Flydoor5 XL, Slingshot/Moses/RDB 70/90/101cm masts with 1200/860/800/730/600 kitefoil or 2200/1700/1400 wingfoil wings and 310/230/425 stabilizers, Naish MicroChip 80cm, 36" Woody, Slingshot Dwarfcraft Micro 100, MBS Comp 95x

For sale: Slingshot Turbine 9/13m, 20” Guardian bar, 1700 sq.cm wing/fuselage/stabilizer fitting Moses mast
.
Brand Affiliation: None
Has thanked: 461 times
Been thanked: 690 times

Re: Moses 2019

Postby grigorib » Tue May 28, 2019 5:42 am

Looks like 75cm aluminum mast and fuselage to accommodate aluminum mast. Nice that mast is closer to the wing.
Attachments
C57AEA40-CB80-4EE8-A492-8106F5DFC42F.jpeg

alowishus
Medium Poster
Posts: 148
Joined: Sun Apr 21, 2019 3:38 pm
Gear: ozone airush slingshot moses
Brand Affiliation: None
Has thanked: 36 times
Been thanked: 15 times

Re: Moses 2019

Postby alowishus » Tue May 28, 2019 11:42 am

grigorib wrote:
Tue May 28, 2019 5:42 am
Looks like 75cm aluminum mast and fuselage to accommodate aluminum mast. Nice that mast is closer to the wing.
Another fuse???

grigorib
Very Frequent Poster
Posts: 4146
Joined: Mon Aug 01, 2016 8:12 pm
Kiting since: 2009
Local Beach: OBX; Clinton Lake, IL; Lake Michigan; Hood River; La Ventana; Ocean Park, PR; SPI; Tawas, MI
Gear: Kites: Slingshot Rally 5/7/9/11m, Turbine 9/13m, SST 4/5m, UFO 3/5/7/9m, Flysurfer Speed4 10m standard, Flysurfer 2cool 6m, Peter Lynn Venom II ARC 16m

Boards: Spleene RIP 37, Flysurfer Radical6 138, Flysurfer Flydoor5 XL, Slingshot/Moses/RDB 70/90/101cm masts with 1200/860/800/730/600 kitefoil or 2200/1700/1400 wingfoil wings and 310/230/425 stabilizers, Naish MicroChip 80cm, 36" Woody, Slingshot Dwarfcraft Micro 100, MBS Comp 95x

For sale: Slingshot Turbine 9/13m, 20” Guardian bar, 1700 sq.cm wing/fuselage/stabilizer fitting Moses mast
.
Brand Affiliation: None
Has thanked: 461 times
Been thanked: 690 times

Re: Moses 2019

Postby grigorib » Tue May 28, 2019 12:44 pm

alowishus wrote:
Tue May 28, 2019 11:42 am
grigorib wrote:
Tue May 28, 2019 5:42 am
Looks like 75cm aluminum mast and fuselage to accommodate aluminum mast. Nice that mast is closer to the wing.
Another fuse???
Apparently

trod27
Medium Poster
Posts: 74
Joined: Sat Jun 23, 2012 4:36 pm
Local Beach: Utah
Favorite Beaches: Gorge, Los Barilles, Deer Creek
Style: freestyle
Gear: Slingshot, Moses
Brand Affiliation: None
Has thanked: 0
Been thanked: 5 times

Re: Moses 2019

Postby trod27 » Wed May 29, 2019 4:09 am

looks like my 710
Attachments
20190510_154231.jpg

grigorib
Very Frequent Poster
Posts: 4146
Joined: Mon Aug 01, 2016 8:12 pm
Kiting since: 2009
Local Beach: OBX; Clinton Lake, IL; Lake Michigan; Hood River; La Ventana; Ocean Park, PR; SPI; Tawas, MI
Gear: Kites: Slingshot Rally 5/7/9/11m, Turbine 9/13m, SST 4/5m, UFO 3/5/7/9m, Flysurfer Speed4 10m standard, Flysurfer 2cool 6m, Peter Lynn Venom II ARC 16m

Boards: Spleene RIP 37, Flysurfer Radical6 138, Flysurfer Flydoor5 XL, Slingshot/Moses/RDB 70/90/101cm masts with 1200/860/800/730/600 kitefoil or 2200/1700/1400 wingfoil wings and 310/230/425 stabilizers, Naish MicroChip 80cm, 36" Woody, Slingshot Dwarfcraft Micro 100, MBS Comp 95x

For sale: Slingshot Turbine 9/13m, 20” Guardian bar, 1700 sq.cm wing/fuselage/stabilizer fitting Moses mast
.
Brand Affiliation: None
Has thanked: 461 times
Been thanked: 690 times

Re: Moses 2019

Postby grigorib » Wed May 29, 2019 1:18 pm

trod27 wrote:
Wed May 29, 2019 4:09 am
looks like my 710
Who knows what the length will be, but if you zoom into mast-fuselage attachment part it's obvious that the fuselage has mast profile CNCed to fit aluminum mast.

So yes, fortunately standard wing/stabilizer but different fuselage. If I were Moses I’d make upper surface flat and connection flush (and extra holes, or elongated holes - in "athletics track" shape) so people can bolt the fuselage to other manufacturers masts (which have different profile and hole spacing). Also with flush connection there’s less material needed in the fuselage so it could become thinner and lighter.

trod27
Medium Poster
Posts: 74
Joined: Sat Jun 23, 2012 4:36 pm
Local Beach: Utah
Favorite Beaches: Gorge, Los Barilles, Deer Creek
Style: freestyle
Gear: Slingshot, Moses
Brand Affiliation: None
Has thanked: 0
Been thanked: 5 times

Re: Moses 2019

Postby trod27 » Mon Jun 03, 2019 12:55 am

grigorib wrote:
Sun May 26, 2019 7:42 pm
I promised I’d compare 483 and 450 stabilizers side by side. so I did yesterday with 683s wing, 710 fuselage, 105cm mast and my 36” woody board under 7m Rally.

Session #1 - 450 stabilizer shimmed with 0.9mm washer - felt pretty good. Proper foot position on the board
Session #2 - 483 stabilizer, no shim. Perfect and perfect foot position
Session #3 - 450 stabilizer shimmed with a 1.2mm washer. Perfect ride, perfect foot position.

Waiting for my proper shims to come in mail.

Conclusion - 483 stabilizer is amazing but has wingtips pointed down and prone to damage in shallows. 450 stabilizer is more compact, 45g heavier, has better, damage-prone winglets pointed up and it takes shims to get foot positioned right where they were with 483

I will also try to do another attempt of riding 683s with 710 fuselage and 91cm mast but 330 or 325 stabilizer when I get to OBX coming weekend.
I hope to see you guys on water
Grig your are right my man. I did 2 day test with 633/710/450/91 on SS DC 42" strapless.
First day no rear shim, and I really have to ride forward with a lot of foot pressure. Big take away is rear foot was right over front wing, and front foot was right behind second foot strap hole.
Today i put 1.25mm shim on rear bolt of rear wing. Rode awesome. much better feel. rear foot 3" behind front wing. Front foot behind fourth foot strap hole.

I want to try a little more shim (.3mm)?

I used heat shrink. it is 15mm wide, and .60mm thick (2 sides). I sandwiched two pieces together (~1.25mm) and trimmed. Thinking about adding .3mm
Attachments
20190602_161506.jpg
20190602_161522.jpg
20190602_161039.jpg

alowishus
Medium Poster
Posts: 148
Joined: Sun Apr 21, 2019 3:38 pm
Gear: ozone airush slingshot moses
Brand Affiliation: None
Has thanked: 36 times
Been thanked: 15 times

Re: Moses 2019

Postby alowishus » Mon Jun 03, 2019 7:51 am

grigorib wrote:
Sun May 26, 2019 7:42 pm
I promised I’d compare 483 and 450 stabilizers side by side. so I did yesterday with 683s wing, 710 fuselage, 105cm mast and my 36” woody board under 7m Rally.

Session #1 - 450 stabilizer shimmed with 0.9mm washer - felt pretty good. Proper foot position on the board
Session #2 - 483 stabilizer, no shim. Perfect and perfect foot position
Session #3 - 450 stabilizer shimmed with a 1.2mm washer. Perfect ride, perfect foot position.

Waiting for my proper shims to come in mail.

Conclusion - 483 stabilizer is amazing but has wingtips pointed down and prone to damage in shallows. 450 stabilizer is more compact, 45g heavier, has better, damage-prone winglets pointed up and it takes shims to get foot positioned right where they were with 483

I will also try to do another attempt of riding 683s with 710 fuselage and 91cm mast but 330 or 325 stabilizer when I get to OBX coming weekend.
I hope to see you guys on water
Hi grigor, Where did you order your shims from? While I'm tempted to sandwich and bit a plastic in there like trod, the shims you have pictured look the deal.

grigorib
Very Frequent Poster
Posts: 4146
Joined: Mon Aug 01, 2016 8:12 pm
Kiting since: 2009
Local Beach: OBX; Clinton Lake, IL; Lake Michigan; Hood River; La Ventana; Ocean Park, PR; SPI; Tawas, MI
Gear: Kites: Slingshot Rally 5/7/9/11m, Turbine 9/13m, SST 4/5m, UFO 3/5/7/9m, Flysurfer Speed4 10m standard, Flysurfer 2cool 6m, Peter Lynn Venom II ARC 16m

Boards: Spleene RIP 37, Flysurfer Radical6 138, Flysurfer Flydoor5 XL, Slingshot/Moses/RDB 70/90/101cm masts with 1200/860/800/730/600 kitefoil or 2200/1700/1400 wingfoil wings and 310/230/425 stabilizers, Naish MicroChip 80cm, 36" Woody, Slingshot Dwarfcraft Micro 100, MBS Comp 95x

For sale: Slingshot Turbine 9/13m, 20” Guardian bar, 1700 sq.cm wing/fuselage/stabilizer fitting Moses mast
.
Brand Affiliation: None
Has thanked: 461 times
Been thanked: 690 times

Re: Moses 2019

Postby grigorib » Mon Jun 03, 2019 2:55 pm

alowishus wrote:
Mon Jun 03, 2019 7:51 am
grigorib wrote:
Sun May 26, 2019 7:42 pm
I promised I’d compare 483 and 450 stabilizers side by side. so I did yesterday with 683s wing, 710 fuselage, 105cm mast and my 36” woody board under 7m Rally.

Session #1 - 450 stabilizer shimmed with 0.9mm washer - felt pretty good. Proper foot position on the board
Session #2 - 483 stabilizer, no shim. Perfect and perfect foot position
Session #3 - 450 stabilizer shimmed with a 1.2mm washer. Perfect ride, perfect foot position.

Waiting for my proper shims to come in mail.

Conclusion - 483 stabilizer is amazing but has wingtips pointed down and prone to damage in shallows. 450 stabilizer is more compact, 45g heavier, has better, damage-prone winglets pointed up and it takes shims to get foot positioned right where they were with 483

I will also try to do another attempt of riding 683s with 710 fuselage and 91cm mast but 330 or 325 stabilizer when I get to OBX coming weekend.
I hope to see you guys on water
Hi grigor, Where did you order your shims from? While I'm tempted to sandwich and bit a plastic in there like trod, the shims you have pictured look the deal.
Made by Jim Stringfellow

salvino
Frequent Poster
Posts: 323
Joined: Mon Oct 29, 2007 1:16 pm
Local Beach: Eastern end of Lake Erie
Favorite Beaches: Barbados
Hatteras
Lakes Erie and Ontario
Gear: Stallion SB
Moses 633,590,500 HF
Temavento board
Grooveskate board
Airush Ultra, North Neo 5,7,9
Brand Affiliation: None
Location: buffalo, ny
Has thanked: 2 times
Been thanked: 5 times

Re: Moses 2019

Postby salvino » Mon Jun 03, 2019 3:05 pm

I swapped out the stabilizer that comes with Onda set up to the 325.

Wow!

I moved mast 3 cm forward on 110cm strapless Grooveskate. I have 2 sessions on it. Unbelievable turning and freedom. My tacks are now adjusting. Sitting is more challenging to get pitch under control but that’s coming along.


Return to “Hydrofoil”

Who is online

Users browsing this forum: 20kts, Baidu [Spider] and 158 guests