Moses SABfoil

[Peter_Frank]

WOW that looks good, I just love all clean "box" connections, beautiful and appealing

Peter

[ap888]

That board looks like it could break the sound barrier

[Foil]

there will be a 81cm mast for 2019 should be avaiable from end of feb 2019

it now the start of March.
so where is my shallow water 81cm mast?

[cwood]

nothing to see here

[ap888]

^^heard 1 more month just have to be patient could be before then...busy factory

[grigorib]

Moses is going to launch 2 new windsurf foils by feb end /mid march , the freeride model adopts a new front wing named 790 (actually the span is a bit longer 80,2 cm)
The same wing can be used with the surf fuselage , so there won't be any S model.

This should avoid any future confusion since the wing is the same for surf and windsurf
The 790 for surf use is intended to go in between the 633 and the 873 Tortuga wing but with way higher aspect ratio
this front wing will pair with a new stab named 450 that can be used also with the 633 and 873


The 780 is a totally different wing , 780 and 900 (span) are 2 race wings for windsurf and they comes from the 645 new kite race wing DNA
will adopt a 105 dedicated windsurf mast and a very long fuselage (the stab is the same as kite race model the new 425)

hope this fix some doubts I read here


cheers
Jim

790 and 450 look neat! 450 looks like a larger 330 Very pretty!
Judging by the mast it’s a photo of a windsurf set but fuselage looks like surf version.
Is it 749 or new 710 fuselage in the picture?

Since 790 wing was supposed to fit both surf/windsurf fuselages I have few more questions:
Is 710 fuselage compatible with 749 (surf/SUP wing hole spacing)?
Is 900 fuselage compatible with 838 (windsurf wing hole spacing)?
What are differences going from 749+838 to 710+900 besides length and manganese added to alloy?
Did use of new material made them lighter?
Comparing 710 to 749 - did front wing move closer back to mast or stabilizer moved forward?

[grigorib]

^^^ Does anyone know?

[juanpasala]

Is it possible to put a 633 wing on a Havok fuselage?
Just asking

[grigorib]

Is it possible to put a 633 wing on a Havok fuselage?
Just asking

No. Havok 645 wing is on 647 kite fuselage and 633 goes onto 749/710 fuselages.

“Hopes and prayers" go towards larger-than-590 wing for 647 fuselage to be released one day. Something ~1000 sq.cm. would be awesome. There's a whole inch of space between trailing edge of 590 and the fuselage-mast mount bolt when mounted on 647 fuselage and the wing could be more arrowheaded forward as well as swept back for additional surface area.

As a workaround you can get 683s/710/425 set and it should be pretty awesome toy which could be paired with 633 or 790 wings for more lowend

[Brizair10]

Will there be Moses Aluminium masts soon ?
some shops are already offering 45, 70 and 90 cm with an adapterplate....
https://www.westcoastkiters.at/shop/foi ... -and-wind/
https://kiteoutlet.eu/index.php/en/bran ... -mast-only

no pictures or further Information on these Websites but you can already order them..... not too expensive...