Quick Question:
Recently bought a used ONDA 633/483 and it came with non-original mounting hardware (Philips head screws, not long enough). Can someone please tell me the PROPER screw lengths for the 3 front wing screws and 2 stabilizer screws. Info on Moses web site is conflicting and I'm expecting (like on my 590) that probably 2 of the screws on the 633 are longer than the trailing edge wing.
I'm assuming it ships with M6 Torx I just need the lengths. Thanks all.
Moses Onda 633/483 Mounting Hardware
-
phlow
- Frequent Poster
- Posts: 384
- Joined: Mon Mar 03, 2003 6:22 pm
- Weight: 216lbs
- Local Beach: Leeside, Beasley, Sandestin
- Favorite Beaches: Long Beach, Provo, Turks and Caicos
Sandy Spit, BVI's
Loblolly Bay, Anegada
Coco Plum, Exuma - Style: Foil, Freeride, Surf
- Gear: Duotone Neo / Mono, Nobile NHP, Jimmy Lewis Surf and SUP, Kanaha Shapes Much Macho, Moses Hydrofoils
- Brand Affiliation: None
- Location: Destin, FL
- Has thanked: 55 times
- Been thanked: 14 times
- Contact:
-
Brizair10
- Medium Poster
- Posts: 54
- Joined: Mon Sep 17, 2018 10:44 am
- Gear: Onda 633, Old Tube kites, soul10
- Brand Affiliation: None
- Has thanked: 9 times
- Been thanked: 11 times
-
Foil
- Very Frequent Poster
- Posts: 1447
- Joined: Mon Oct 23, 2017 7:44 pm
- Kiting since: 2000
- Weight: 91kg
- Local Beach: New Brighton near Liverpool. Open sea with big low tide deep lagoon
and regular at Rhosneigr and Newbrough on Anglesey - Favorite Beaches: New Brighton, Rhosneigr, Fleetwood, Newbrough, Blackrock sands
lake Como (Italy) El Medano - Style: kite foiler since 2017 Ttip since 2000
- Gear: My rule to gear choice is "IF IT DONT BOOST ITS NO USE"
Groove Skates 110cm 2022 editions
kraken mast systems 103k and 93k.
Kraken fuse 703k
Duotone SLS Evo's -- 11mtr/9mtr/7mtr/6mtr/ 4mtr RRD.
Duotone 2022 click bars x2,my own custom made lines fitted,
(modified lines now available for the flite99 shod duotone bars)
Bar lines made up to any length in a choice of strengths, power lines, trim lines, pigtails, leader lines, bridal lines, elasticated lines, I make and fit them all, free fit and tune service,
quick turnaround,drop me a message, find me on messenger, Colin Moore. - Brand Affiliation: None
- Has thanked: 116 times
- Been thanked: 324 times
Re: Moses Onda 633/483 Mounting Hardware
the rear stabilizer screws are much smaller than 30mm,
the main 633 wing use the 3 longer torx screws but not the 483 stab, I am guessing 15mm for them, maximum.maybe less?
it's a shame the 663 wing screws are too long for the 683s wing, I tried them but they bottomed out by only a few mm.
-
Foil
- Very Frequent Poster
- Posts: 1447
- Joined: Mon Oct 23, 2017 7:44 pm
- Kiting since: 2000
- Weight: 91kg
- Local Beach: New Brighton near Liverpool. Open sea with big low tide deep lagoon
and regular at Rhosneigr and Newbrough on Anglesey - Favorite Beaches: New Brighton, Rhosneigr, Fleetwood, Newbrough, Blackrock sands
lake Como (Italy) El Medano - Style: kite foiler since 2017 Ttip since 2000
- Gear: My rule to gear choice is "IF IT DONT BOOST ITS NO USE"
Groove Skates 110cm 2022 editions
kraken mast systems 103k and 93k.
Kraken fuse 703k
Duotone SLS Evo's -- 11mtr/9mtr/7mtr/6mtr/ 4mtr RRD.
Duotone 2022 click bars x2,my own custom made lines fitted,
(modified lines now available for the flite99 shod duotone bars)
Bar lines made up to any length in a choice of strengths, power lines, trim lines, pigtails, leader lines, bridal lines, elasticated lines, I make and fit them all, free fit and tune service,
quick turnaround,drop me a message, find me on messenger, Colin Moore. - Brand Affiliation: None
- Has thanked: 116 times
- Been thanked: 324 times
Re: Moses Onda 633/483 Mounting Hardware
it always looks weird when you pop in the 3 long 30mm screws and you look under the wing to check the length of screw exposed, it looks so wrong,
but then you have to remember the center screw has very little metal to screw into being in the thinnest part of the fuselage.
-
grigorib
- Very Frequent Poster
- Posts: 4163
- Joined: Mon Aug 01, 2016 8:12 pm
- Kiting since: 2009
- Local Beach: OBX; Clinton Lake, IL; Lake Michigan; Hood River; La Ventana; Ocean Park, PR; SPI; Tawas, MI
- Gear: Kites: Slingshot Rally 5/7/9/11m, Turbine 9/13m, SST 4/5m, UFO 3/5/7/9m, Flysurfer Speed4 10m standard, Flysurfer 2cool 6m, Peter Lynn Venom II ARC 16m
Boards: Spleene RIP 37, Flysurfer Radical6 138, Flysurfer Flydoor5 XL, Slingshot/Moses/RDB 70/90/101cm masts with 1200/860/800/730/600 kitefoil or 2200/1700/1400 wingfoil wings and 310/230/425 stabilizers, Naish MicroChip 80cm, 36" Woody, Slingshot Dwarfcraft Micro 100, MBS Comp 95x
For sale: Slingshot Turbine 9/13m, 20” Guardian bar, 1700 sq.cm wing/fuselage/stabilizer fitting Moses mast
. - Brand Affiliation: None
- Has thanked: 468 times
- Been thanked: 696 times
Re: Moses Onda 633/483 Mounting Hardware
The rear ones are 16mmFoil wrote: ↑Sat Mar 30, 2019 7:17 pmit always looks weird when you pop in the 3 long 30mm screws and you look under the wing to check the length of screw exposed, it looks so wrong,
but then you have to remember the center screw has very little metal to screw into being in the thinnest part of the fuselage.
- Rating: 3.03%
Who is online
Users browsing this forum: Bradford and 404 guests