i have used two separate lines on one harness, and one length of line on another, but stop knotted this to create the benefit of 2 lines, i use 2 lines purely due to habit, as before the north line slider chicken loop was available the line would wear quite quickly, now there is no wear at all, but two lines are easy to do, so twice as safe.alowishus wrote: ↑Thu May 09, 2019 1:57 pmGood info Foil and nice pics.Foil wrote: ↑Wed May 08, 2019 8:24 amIf you end up with the slingshot rope slider bar as in the top one in the pictures then like me you may find the slide distance is to short, making for half baked toeside rides, making you trying to force the bar found a bit more whilst riding,
Or as I tried, I lengthened the rope to offer up more slide distance, this really felt bad, very jerky and horrible for boosting on a Ttip as the chicken loop snaps back to the center as you move around in the air,
The longer rope on the bottom bar is perfect for foil and Ttip, the rope is long but close in so you don't experience the jerky snappy off/on movement when the rope has a large V in it
Question I: Appearances may be deceptive, but are you running a single length of rope on both loops? i.e. There is no backup rope, rather, two lines of the same rope? If so, what is the reason for this?
Question II: What knot do you tie at the end of the rope? Looks like some kind of stopper knot.
Ion b2 harness is more of a shorts type harness, no big bulky backside problem.
Users browsing this forum: MaximumAC, Yahoo [Bot] and 7 guests