Contact   Imprint   Advertising   Guidelines

Where to buy T Nuts and Bolts for Groove Skate

A forum dedicated to Hydrofoil riders
ap888
Frequent Poster
Posts: 273
Joined: Thu Sep 13, 2018 2:24 am
Kiting since: 2007
Local Beach: Zion/K peir/Inver/Goderich
Favorite Beaches: Good wind/Flat water/Good waves
Style: Foil/Loops/Big Air/Strapless
Gear: Ozone Uno V2 4m
North Neo (17) 5m
Cabrinha Drifter (16) 8m
Flysurfer Sonic 2 -11m
Moses
BWS Stallion 5’
CrazyFly Shox Custom 135
Groove Skate
Ride Engine
Brand Affiliation: HFL
Has thanked: 12 times
Been thanked: 9 times

Where to buy T Nuts and Bolts for Groove Skate

Postby ap888 » Sat May 11, 2019 8:39 pm

Would like to have extra... as one of the bolts Allen tolerance is quite loose compared to other ones shipping from Italy last time was quite expensive so US would be preferred as well as 316 grade thanks in advance

grigorib
Very Frequent Poster
Posts: 1627
Joined: Mon Aug 01, 2016 8:12 pm
Kiting since: 2009
Local Beach: OBX; Clinton Lake, IL; Lake Michigan; Tawas, MI; SPI; La Ventana
Gear: Kites: Slingshot Rally 5/7/9/11m, Slingshot Turbine 9m, Flysurfer Speed4 10m standard, Peter Lynn Venom II ARC 16m
Boards: Spleene RIP 37, Flysurfer Flydoor5 XL, Slingshot/Moses 80/91/105cm masts 590/683s/633 wings, Tim's 36" "woody", Slingshot Dwarfcraft 42", MBS Comp 95x

For sale: Slingshot Dwarfcraft 42"
Brand Affiliation: None
Has thanked: 41 times
Been thanked: 77 times

Re: Where to buy T Nuts and Bolts for Groove Skate

Postby grigorib » Sun May 12, 2019 12:40 am


Foil
Very Frequent Poster
Posts: 679
Joined: Mon Oct 23, 2017 7:44 pm
Kiting since: 2001
Local Beach: Newbrighton near Liverpool
Favorite Beaches: holidays = Flag beach and Matas bay
Home=Rhosneigr,Newbrighton,Ainsdale,Fleetwood,Newbrough
Style: improving foiler.
Gear: 2019 Groove Skate 130, naked carbon,gold stripes
101cm Moses Carbon mast
71+90cm Slingshot masts with moses adaptor
Moses- 633 wing set
Moses - 683s wing set
Ozone V4 Reo 6/8/9
Ozone Chrono V3 ultralight foil kites= 13mtr/11mtr/9mtr
Ozone water foil bar,click in
Nobile 50/50 twin tip
North 2018 click bars with Q power lines
massive grin
Brand Affiliation: None
Has thanked: 24 times
Been thanked: 51 times

Re: Where to buy T Nuts and Bolts for Groove Skate

Postby Foil » Sun May 12, 2019 11:08 am

skate track nuts are slightly unusual, the new ones are very good compared to all the others I have.
ordering is a bit of a gamble as many others will not fit.
I will take some photos of the nuts I have and tell you which ones fit the skate.
I recommend anybody ordering a new skate asks for 2 sets of hardware( Nuts and bolts)
I did on 3 skates and have given many away to guys who have lost one on the beach.

just the bolts are available on Ebay, these are great with the flanged head so washers are not needed
https://www.ebay.co.uk/itm/M3-M4-M5-M6- ... 75rEiKaIFw
Last edited by Foil on Sun May 12, 2019 1:44 pm, edited 1 time in total.

Foil
Very Frequent Poster
Posts: 679
Joined: Mon Oct 23, 2017 7:44 pm
Kiting since: 2001
Local Beach: Newbrighton near Liverpool
Favorite Beaches: holidays = Flag beach and Matas bay
Home=Rhosneigr,Newbrighton,Ainsdale,Fleetwood,Newbrough
Style: improving foiler.
Gear: 2019 Groove Skate 130, naked carbon,gold stripes
101cm Moses Carbon mast
71+90cm Slingshot masts with moses adaptor
Moses- 633 wing set
Moses - 683s wing set
Ozone V4 Reo 6/8/9
Ozone Chrono V3 ultralight foil kites= 13mtr/11mtr/9mtr
Ozone water foil bar,click in
Nobile 50/50 twin tip
North 2018 click bars with Q power lines
massive grin
Brand Affiliation: None
Has thanked: 24 times
Been thanked: 51 times

Re: Where to buy T Nuts and Bolts for Groove Skate

Postby Foil » Sun May 12, 2019 11:55 am

From the top
The new Groove Skate hardware, great and they slide so easily, but rubbish if you want to slide on the mast without removing the screws.

Then the old groove skate hardware, very good, but still not great for leaving in the mast and sliding back in place but can be done with these

Moses 128 hardware, basic to say the least, and will not fit the skate, but the best for leaving on the mast and sliding back on the board

Lastly these are the original hardware button nuts for the Moses masts and these make great T nuts for any type of track, just grind down 2 edges to fit the track and set up as shown in the photo, cheap and easy if you have the spares.

And why do we not get given stainless washers for any of these fixings? The large ones in the photo are what I use and are available on eBay, or Lidl type stores in the tools aisle

if its just 8mm bolts you want then I bought loads off ebay, if you look closely in the box on the left there are 8mm bolts which i sprayed yellow for another job, but they are the best as not only are they allen head but they have a wide flange button head, so do not need any washers.
https://www.ebay.co.uk/itm/M3-M4-M5-M6- ... 75rEiKaIFw



Image

ap888
Frequent Poster
Posts: 273
Joined: Thu Sep 13, 2018 2:24 am
Kiting since: 2007
Local Beach: Zion/K peir/Inver/Goderich
Favorite Beaches: Good wind/Flat water/Good waves
Style: Foil/Loops/Big Air/Strapless
Gear: Ozone Uno V2 4m
North Neo (17) 5m
Cabrinha Drifter (16) 8m
Flysurfer Sonic 2 -11m
Moses
BWS Stallion 5’
CrazyFly Shox Custom 135
Groove Skate
Ride Engine
Brand Affiliation: HFL
Has thanked: 12 times
Been thanked: 9 times

Re: Where to buy T Nuts and Bolts for Groove Skate

Postby ap888 » Sun May 12, 2019 2:17 pm

Do you happen to know which T Nuts fit the groove Skate track ?

Foil
Very Frequent Poster
Posts: 679
Joined: Mon Oct 23, 2017 7:44 pm
Kiting since: 2001
Local Beach: Newbrighton near Liverpool
Favorite Beaches: holidays = Flag beach and Matas bay
Home=Rhosneigr,Newbrighton,Ainsdale,Fleetwood,Newbrough
Style: improving foiler.
Gear: 2019 Groove Skate 130, naked carbon,gold stripes
101cm Moses Carbon mast
71+90cm Slingshot masts with moses adaptor
Moses- 633 wing set
Moses - 683s wing set
Ozone V4 Reo 6/8/9
Ozone Chrono V3 ultralight foil kites= 13mtr/11mtr/9mtr
Ozone water foil bar,click in
Nobile 50/50 twin tip
North 2018 click bars with Q power lines
massive grin
Brand Affiliation: None
Has thanked: 24 times
Been thanked: 51 times

Re: Where to buy T Nuts and Bolts for Groove Skate

Postby Foil » Sun May 12, 2019 3:40 pm

ap888 wrote:
Sun May 12, 2019 2:17 pm
Do you happen to know which T Nuts fit the groove Skate track ?
The M8 brass T nut at 2.15 dollars looks a good bet, the only doubt I have is the Groove Skate slot is not big, narrow top to bottom, width is normal, but if the Huston ones are a little too thick then being made from brass they are easy to file down a little.
These users thanked the author Foil for the post:
ap888 (Sun May 12, 2019 5:01 pm)
Rating: 10%

chibern
Rare Poster
Posts: 31
Joined: Wed Sep 20, 2017 5:37 pm
Kiting since: 2017
Local Beach: San Diego
Gear: Contra 15
Prodigy 12
Surfboard
Brand Affiliation: None
Has thanked: 5 times
Been thanked: 1 time

Re: Where to buy T Nuts and Bolts for Groove Skate

Postby chibern » Sun May 12, 2019 5:28 pm

https://foilmount.com/collections/all

they also sell "low profile" SS t-nuts that fit long board fin tracks used for retro-fitting foil tracks to boards.

ap888
Frequent Poster
Posts: 273
Joined: Thu Sep 13, 2018 2:24 am
Kiting since: 2007
Local Beach: Zion/K peir/Inver/Goderich
Favorite Beaches: Good wind/Flat water/Good waves
Style: Foil/Loops/Big Air/Strapless
Gear: Ozone Uno V2 4m
North Neo (17) 5m
Cabrinha Drifter (16) 8m
Flysurfer Sonic 2 -11m
Moses
BWS Stallion 5’
CrazyFly Shox Custom 135
Groove Skate
Ride Engine
Brand Affiliation: HFL
Has thanked: 12 times
Been thanked: 9 times

Re: Where to buy T Nuts and Bolts for Groove Skate

Postby ap888 » Sun May 12, 2019 6:49 pm

chibern wrote:
Sun May 12, 2019 5:28 pm
https://foilmount.com/collections/all

they also sell "low profile" SS t-nuts that fit long board fin tracks used for retro-fitting foil tracks to boards.
Oh yeah those stainless ones buying for sure the video seems like the decision maker :lol:
And gonna buy a set of these titanium bolts to go with them :thumb:
Attachments
A01F775D-5D05-44BA-9336-E6DAD44A6A06.png

chibern
Rare Poster
Posts: 31
Joined: Wed Sep 20, 2017 5:37 pm
Kiting since: 2017
Local Beach: San Diego
Gear: Contra 15
Prodigy 12
Surfboard
Brand Affiliation: None
Has thanked: 5 times
Been thanked: 1 time

Re: Where to buy T Nuts and Bolts for Groove Skate

Postby chibern » Sun May 12, 2019 6:58 pm

Real Watersports also sells titanium bolts for a bit cheaper but might make up for it in shipping...

https://www.realwatersports.com/collect ... l-hardware
m8.JPG

User avatar
Horst Sergio
Frequent Poster
Posts: 486
Joined: Thu Oct 29, 2015 10:57 pm
Kiting since: 1999
Favorite Beaches: Every puddle I can find in Central Europe,
the unpopular the better
Style: SLOW STYLE & stuntkiting
Gear: Just MONOFOILS, no training wheels ;-)
OZONE chrono; FLYSURFER sonic²/r, peak4; CONCEPTAIR wave
Brand Affiliation: KITEJUNKIE.com 's prank monkey
Has thanked: 14 times
Been thanked: 13 times
Contact:

Re: Where to buy T Nuts and Bolts for Groove Skate

Postby Horst Sergio » Mon May 13, 2019 1:32 am

Foil wrote:
Sun May 12, 2019 3:40 pm
ap888 wrote:
Sun May 12, 2019 2:17 pm
Do you happen to know which T Nuts fit the groove Skate track ?
The M8 brass T nut at 2.15 dollars looks a good bet, the only doubt I have is the Groove Skate slot is not big, narrow top to bottom, width is normal, but if the Huston ones are a little too thick then being made from brass they are easy to file down a little.
1. No the Groove Skates Tracks are the opposite, a bit to wide for the standard M8 brass T nut, apart from that, those from groove are anyway better:

2. Be carefull with those standard brass nut, I had 4 nearly completely broken ones in one board, the next driftwood would have given them the rest. Don't know exactly what happened used them for over 100 sessions with a lot of jumping, but maybe also a few times with the screw not completely through them. Screw length has to be very precise in tracks, 2 mm to less and it brakes the nuts easily, 2 mm to much and you will brake the tracks. Take care of that and for the rest always use a safety leash for your foil.
Image

3. Another funny thing at the offers from houston kiteboarding:
a) Naish Thrust Base Plate 145 $
b) Takuma Base Plate + Nuts 100 $
c) again the same Pate + Nuts 29 €
https://gongsupshop.com/epages/box1707. ... LLTOPPLATE
As far I can see these three are all exactly the same plates ...

Who pays 100 $ for a Naish sticker? :D
These users thanked the author Horst Sergio for the post:
ap888 (Mon May 13, 2019 2:48 am)
Rating: 10%


Return to “Hydrofoil”

Who is online

Users browsing this forum: AndersP, DukeSilver, Sbrinckman, SimonP and 6 guests

cron