Page 1 of 1
Ketos/Slingshot adapter needed
Posted: Sun May 19, 2019 2:57 pm
by Big Wally
I’m looking for a mast adapter so that I can attach my Ketos mast to my Slingshot Alien Air board that has a track. The Ketos mast has ONE screw on top of Mast. Any guidance would be appreciated.
Thanks in advance!
BW
Re: Ketos/Slingshot adapter needed
Posted: Sun May 19, 2019 3:26 pm
by Breze
For this issue i have the kf Box Out, have a look at the Ketos page. If you want to use the 1 screw set up, you have to drill a hole threw your AA. Epoxy it ,drill with M6 at the right place. Take a longer M6 screw and a washer, done.
Re: Ketos/Slingshot adapter needed
Posted: Sun May 19, 2019 3:30 pm
by Breze
Of course you can use the kf box Out Adapter as usual , the 1 screw is flush at the bottom of the box
Re: Ketos/Slingshot adapter needed
Posted: Sun May 19, 2019 3:38 pm
by Big Wally
I prefer not to have to Modify myself and drill new holes.
Thanks
Re: Ketos/Slingshot adapter needed
Posted: Sun May 19, 2019 9:56 pm
by Peter_Frank
Big Wally wrote: ↑Sun May 19, 2019 3:38 pm
I prefer not to have to Modify myself and drill new holes.
Thanks
Then simply use the carbon adapter as Breze writes.
I know others who do this, if they got a "plate" board they want to use with the KFBox.
I use a carbon adapter for my skimboard, so plate style and then 4 screws
PF
Re: Ketos/Slingshot adapter needed
Posted: Sat May 25, 2019 4:19 pm
by Big Wally
Is this the adapter? The 4 holes will line up with the track on my Slingshot Alien?
Re: Ketos/Slingshot adapter needed
Posted: Sat May 25, 2019 4:36 pm
by faklord
If the track spacing is on your board is 90mm, then yes it should.