Kiteforum.com

I’m looking for a mast adapter so that I can attach my Ketos mast to my Slingshot Alien Air board that has a track. The Ketos mast has ONE screw on top of Mast. Any guidance would be appreciated.

Thanks in advance!

BW

For this issue i have the kf Box Out, have a look at the Ketos page. If you want to use the 1 screw set up, you have to drill a hole threw your AA. Epoxy it ,drill with M6 at the right place. Take a longer M6 screw and a washer, done.

Of course you can use the kf box Out Adapter as usual , the 1 screw is flush at the bottom of the box

I prefer not to have to Modify myself and drill new holes.

Thanks

Big Wally wrote: ↑

Sun May 19, 2019 3:38 pm

I prefer not to have to Modify myself and drill new holes.

Thanks

Then simply use the carbon adapter as Breze writes.
I know others who do this, if they got a "plate" board they want to use with the KFBox.

I use a carbon adapter for my skimboard, so plate style and then 4 screws

PF

Is this the adapter? The 4 holes will line up with the track on my Slingshot Alien?

If the track spacing is on your board is 90mm, then yes it should.