Contact   Imprint   Advertising   Guidelines

Moses Stabalizer Shim

A forum dedicated to Hydrofoil riders
kitegirls
Medium Poster
Posts: 170
Joined: Tue Apr 12, 2016 7:04 am
Gear: North Kites and Click Bar.
Brand Affiliation: None
Has thanked: 3 times
Been thanked: 1 time

Moses Stabalizer Shim

Postby kitegirls » Mon Jan 06, 2020 9:00 am

Does anyone have a link of where I could buy shims for the Moses stabilizer? Thanks

Wazza Foil
Frequent Poster
Posts: 206
Joined: Sat Mar 18, 2017 12:15 am
Local Beach: Hams
Style: Kite surfing strapless. Foil, SUP and ka
Gear: lots
Brand Affiliation: None
Has thanked: 7 times
Been thanked: 25 times

Re: Moses Stabalizer Shim

Postby Wazza Foil » Mon Jan 06, 2020 9:52 am

No need to buy anything.
As I do not know what set you have a bit hard to comment but if I do anything it's very minor e.g. thin plastic cut from a milk bottle.

Foil
Very Frequent Poster
Posts: 1253
Joined: Mon Oct 23, 2017 7:44 pm
Kiting since: 2000
Local Beach: New Brighton- nr Liverpool. Open sea with big low tide lagoon
Favorite Beaches: New Brighton, Rhosneigr, Fleetwood, Newbrough
lake Como (Italy)
Style: improving kite foiler since 2017
Gear: Groove Skates 110 and 120 custom graphics and volume 2021 editions
101cm + 91cm Moses Carbon masts
Moses- 633/483 on a 701 fuse
Moses- 718 /421 on the smaller lighter kite fuse
Ozone Hyperlink V1 ultra light 5mtr
Ozone V2 Hyperlink 7mtr + 9mtr
Ozone Chrono V4 foil kite 11mtr, red
duotone click bar 2020, custom lines
duotone 2021 click bar (waiting for delivery)
ION B3 seat harness, now waiting 7 months for delivery:o
massive grin
Brand Affiliation: None
Has thanked: 103 times
Been thanked: 246 times

Re: Moses Stabalizer Shim

Postby Foil » Mon Jan 06, 2020 10:23 am

from here for moses fitments or possible use on most other rear wing tuning,
https://www.skshapes.com/shop/accessoires/

but easy to make from a tiny bit of plastic from kitchen bits of plastic, only 1 degree of change makes a big difference, which is tiny.

qba-epp11
Rare Poster
Posts: 40
Joined: Fri Sep 08, 2017 8:51 am
Local Beach: Mietkowskie Lake
Favorite Beaches: Leba
Style: foil, freeride
Gear: Bracuru, Moses, Cabrinha, Airush, Flysurfer
Brand Affiliation: None
Has thanked: 1 time
Been thanked: 7 times

Re: Moses Stabalizer Shim

Postby qba-epp11 » Tue Jan 07, 2020 9:53 am

These users thanked the author qba-epp11 for the post (total 3):
cwood (Tue Jan 07, 2020 5:05 pm) • a99 (Wed Apr 29, 2020 11:01 pm) • nayy (Mon Jun 15, 2020 11:11 pm)
Rating: 20%

cwood
Very Frequent Poster
Posts: 705
Joined: Tue Mar 24, 2015 7:28 pm
Local Beach: Southern Ontario
Gear: Flysurfer
Moses Hydrofoil
Brand Affiliation: Moses, Flysurfer
Has thanked: 1 time
Been thanked: 70 times

Re: Moses Stabalizer Shim

Postby cwood » Tue Jan 07, 2020 1:06 pm

You can also shim the mast to fuse, which is a better solution as it does not mess with the stab to wing angle of attack. If you shim the stab you are creating the potential for a less smooth ride and reduced glide because you are countering the lift with the flight of the wings and then countering that with your CG.

The following method leaves the AOA of the wing combination the same but moves your CG in the direction you need to feel balanced.

In aircraft terms, shimming the stabilizer is like applying a bit of up elevator through the controls, then moving a bunch of passengers forward to counter that lift and keep the nose down. There is disruption to the airflow.

This method is like establishing trimmed flight for the wings and stabilizer in their neutral state (smooth), then moving passengers around to find the right center of gravity.



Return to “Hydrofoil”

Who is online

Users browsing this forum: No registered users and 3 guests