Contact   Imprint   Advertising   Guidelines

Are all mast bases and boards compatible?

A forum dedicated to Hydrofoil riders
petato2
Rare Poster
Posts: 32
Joined: Tue Mar 09, 2010 12:32 pm
Local Beach: la manga
Favorite Beaches: la manga
Style: freeride
Gear: airush, evo,
Brand Affiliation: None
Has thanked: 0
Been thanked: 0

Are all mast bases and boards compatible?

Postby petato2 » Thu May 21, 2020 6:35 pm

Hi all,

I am experienced in surfkite but have never tried foil. I am thinking in foiling as a long term project (sooner or later I will end up there, as years go by and my back suffers more...)

Budget restrictions, I am thinking in buying now a skim\foil board (RRD squid, good offer), that I can use now as a skim (which I enjoy), and later on I will buy a second hand foil.

RRD Squid has two channels where you screw the base plate of the mast.

Muy question is, the distance between the channels is a common standard same as the distance between the holes of the mast base plate ? Or every brand do its own?

In other words, will I need yo buy an RRD foil set or can I buy other foil brands?

Thanks in advance

grigorib
Very Frequent Poster
Posts: 2384
Joined: Mon Aug 01, 2016 8:12 pm
Kiting since: 2009
Local Beach: OBX; Clinton Lake, IL; Lake Michigan; La Ventana, SPI; Tawas, MI
Gear: Kites: Slingshot Rally 5/7/9/11m, SST 5m, Turbine 9m, Flysurfer Speed4 10m standard, Peter Lynn Venom II ARC 16m

Boards: Spleene RIP 37, Flysurfer Radical6 138, Flysurfer Flydoor5 XL, Slingshot/Moses 80/82/91/105/111cm masts with 637+695/425 590/330 679/450 wingsets, Tim's 36" woody, Slingshot Dwarfcraft Micro 3'6" 2019-2020, MBS Comp 95x

For sale: Slingshot SST 6m 2018 $480, Slingshot Turbine 5m 2017 like new $450, BROkite carbon board 140x44cm like new complete $650, Slingshot Rally 6m 2017 like new $530

Moses 590/647/330 $690, Moses 679/749/483 $890, 80cm alu mast $260
.
Brand Affiliation: None
Has thanked: 190 times
Been thanked: 257 times

Re: Are all mast bases and boards compatible?

Postby grigorib » Thu May 21, 2020 7:14 pm

Common standard is 90mm between centers of holes/tracks and 165mm distance between centers of holes lengthwise. 140mm lengthwise is common spacing for aluminum fuselages.

There have been crazies who delivered proprietary sizing but most mature manufacturers settled on 90x165mm mount standard.

I’d call the shop and ask them to confirm the size for both board and the foil when in doubt


Return to “Hydrofoil”

Who is online

Users browsing this forum: No registered users and 9 guests