Contact   Imprint   Advertising   Guidelines

CAD Software

A forum dedicated to Hydrofoil riders
OzBungy
Very Frequent Poster
Posts: 2534
Joined: Fri Oct 21, 2005 11:35 am
Has thanked: 5 times
Been thanked: 147 times

CAD Software

Postby OzBungy » Mon Jun 29, 2020 4:28 am

I am looking for some 3D cad software to analyse the shape of boards and foils.

Just out of interest I have measured my foils to calculate the area. It's not terribly difficult, but it is a bit laborious and I have to create formulas in spreadsheets. I would like to do the same thing for some boards I have, and do it in a more systematic manner.

It seems to me the act of measuring a board or a foil is the same thing. A bunch of X,Y, Z measurements from a datum. The more measurements the more accurate. Interpolate the spaces between the measurements. Plot the shape. Tell me the area and volume and anything else I can get out of it.

Can anybody recommend any good, free 3D cad programs that would do the job?

BalsaMichel
Medium Poster
Posts: 85
Joined: Mon Apr 13, 2020 11:37 am
Kiting since: 2002
Gear: Flysurfer Soul 8 V2, only boards that fit in a 78cm bag
Has thanked: 18 times
Been thanked: 19 times

Re: CAD Software

Postby BalsaMichel » Mon Jun 29, 2020 9:07 am

OzBungy wrote:
Mon Jun 29, 2020 4:28 am
I am looking for some 3D cad software to analyse the shape of boards and foils.

Just out of interest I have measured my foils to calculate the area. It's not terribly difficult, but it is a bit laborious and I have to create formulas in spreadsheets. I would like to do the same thing for some boards I have, and do it in a more systematic manner.

It seems to me the act of measuring a board or a foil is the same thing. A bunch of X,Y, Z measurements from a datum. The more measurements the more accurate. Interpolate the spaces between the measurements. Plot the shape. Tell me the area and volume and anything else I can get out of it.

Can anybody recommend any good, free 3D cad programs that would do the job?
Hi!

Fusion360 from Autodesk will work for what you have in mind. It´s free if you are willing to sign an annual declaration that you don´t use it for business (or not above a certain amount of turnover). It has an amazing set of tools for 3D-modelling, milling, FEM stress-analysis and thermal/flow-analysis. You can measure out areas and volumes of 3D-models very easily there.

Might need some time until you will be familiar with drawing sketches and make 3D-modeling

Micha

tomtom
Very Frequent Poster
Posts: 1647
Joined: Sun Nov 03, 2002 1:00 am
Has thanked: 19 times
Been thanked: 199 times

Re: CAD Software

Postby tomtom » Mon Jun 29, 2020 1:16 pm

1+ fusion with one minus its cloud based...

otherwise solidworks

User avatar
purdyd
Very Frequent Poster
Posts: 1756
Joined: Mon Jan 06, 2003 1:00 am
Has thanked: 202 times
Been thanked: 185 times

Re: CAD Software

Postby purdyd » Mon Jun 29, 2020 2:59 pm

Try onshape

Free and cloud based

BalsaMichel
Medium Poster
Posts: 85
Joined: Mon Apr 13, 2020 11:37 am
Kiting since: 2002
Gear: Flysurfer Soul 8 V2, only boards that fit in a 78cm bag
Has thanked: 18 times
Been thanked: 19 times

Re: CAD Software

Postby BalsaMichel » Mon Jun 29, 2020 3:49 pm

purdyd wrote:
Mon Jun 29, 2020 2:59 pm
Try onshape

Free and cloud based
I have tried onshape some months ago on a quite old ipad. It´s really cool. Just lost interest because I have SolidWorks here (and no time to play) :D

Micha

User avatar
purdyd
Very Frequent Poster
Posts: 1756
Joined: Mon Jan 06, 2003 1:00 am
Has thanked: 202 times
Been thanked: 185 times

Re: CAD Software

Postby purdyd » Mon Jun 29, 2020 5:17 pm

BalsaMichel wrote:
Mon Jun 29, 2020 3:49 pm
purdyd wrote:
Mon Jun 29, 2020 2:59 pm
Try onshape

Free and cloud based
I have tried onshape some months ago on a quite old ipad. It´s really cool. Just lost interest because I have SolidWorks here (and no time to play) :D

Micha
Doesn’t have all the bells and whistles of solid works but the workflow is better. Less clicking.

User avatar
fluidity
Very Frequent Poster
Posts: 557
Joined: Sat Mar 19, 2016 11:20 pm
Kiting since: 2015
Weight: 104kg
Local Beach: Ngati Toa, Plimmerton, Titahi Bay, Waikanae, Petone, Seatoun, Lyall Bay, Eastbourne, Lake Wairarapa
Favorite Beaches: Plimmerton
Style: Wave, jump
Gear: Late model Switch kites element and nitros,
DIY CAD ultra-concave wave twintips 1500 and 130mm with my own fin designs. Easy upwind, awesome carving. Switch Nitro 10m V7, Naish 5.3m Wing.
Now focussing on Wingsurfing to rise to a new challenge. Building my own foils from my CAD design and 3D prints, built a CNC machine last year and now cutting designs with CNC as well as 3D printing.
Using my own software for foil design.
Location: Porirua New Zealand
Has thanked: 38 times
Been thanked: 70 times

Re: CAD Software

Postby fluidity » Fri Jul 03, 2020 9:47 am

I use Openscad CAD programming language to mathematically describe the shapes I 3D print.
I looked into and downloaded simFlow last year when I was curious about the same thing but I haven't tried it yet.


Return to “Hydrofoil”

Who is online

Users browsing this forum: No registered users and 7 guests