Sabfoil (moses) has also made a few other changes, one is the laser etching of a serial number
Another is a message on the 421 stab "not for FK use" unsure what it means,anybody know??
And the fact that they are now removing the little "paint drip kicker" often found on the trailing edge of most if not all of the Moses rear wings,
this had to be removed by me on all my previous wings by using a wooden block wrapped in grit paper and the kicker removed at a 30deg angle,
well the good new is it is now pre ground off at a 30deg angle, this leaves a super sharp trailing edge, too sharp for me to risk a deep cut, and I quickly removed the danger after a few trial water sessions using the same wood block method to flatten off the edge and round off the super pointy ends
this made no difference to the high speed running and deep hard carving as I tried the wing set before and after smoothing off the edges and points,
in fact it felt slightly better after removing the razor edge and dagger tips during deep hard fast turns, smoother even, so all good.
photo to follow in a few moments of the few changes as described