foilholio wrote: ↑
Sun Jun 24, 2018 11:39 pm
Just to clarify some of the language you use, a bit lost in translation for me, "resleaved" do you mean move? as in you moved B bridles at the tip onto the A bridle. That sounds like a good Idea I might try it.
uups, Thanks for the hint!
Resleaving is a typo I ment resleeving from sleeve, which ment to put one line out of its bridle position to another one.
Here is the new line plan:
Pls note the resleeving:
A bridle has now the new A89 collection line (taken from old b78)
B bridle has now a new b78 line (taken from old c78)
The reason for that is shown at the tension line graphs:
Unfortunately the original lineplan is good for topology, but not good for the real position. I noted them with the "Profile Depth" parameter (values in black).
The idea is, that the tension lines are always backward aligned in reference to direction of flight, to prevent unwanted negative gear effects from backweighted mixer, specially in the wing tips area (note: B connection points there are NOT at 50% position as they are in center of wing, they are at 30% at the tips....)