A screenshot from AR 9 foil kite design. The limits of the Surfplan are reached, because cell count can not be higher than 58 (at least in free version of the program). However cell shape is tolerable even with that number of cells. Also straight line to the wingtips is excessive, because of the limits in bridle design. But doing some unconventional work and then ignoring excessive lines it can be done.
Cascading primary bridles by 3 and 2 makes tertiary level simple, only two lines per side/line row. If it was possible I would have increased cell count to 61, then side by side air intakes in the middle could be avoided. Then cascades would be 3 and 3 and tertiary level still only two lines/side/line row.
Inner structures are quite similar to PL Aero or Ozone R1. However there is only three linerows, like Sonic Race has.
Number of parts is about 800, I haven't counted though