You may find them somewhere. Information is not always easy to find. Flysurfer users were ahead of them on this stuff, and they are on forums like this.a99 wrote: Even if its not Flysurfer problem their can release official recommendations for used and shrinked their foils retunings.
Main problem is no adjustment for Z as standard... People would find things much easier to do and understand if there was.a99 wrote: Still from their not any word kr recommendation how to do retuning in shrinking cases as for bcz can be lot of differences.
That is going to limit depower causing stalling in light wind.HaylingBilly wrote:C Pulleyline was 91.5cm
Would cause the kite to fly to one side with enough depower. You could make an extension on the front or replace them.HaylingBilly wrote:and another 95.5cm
You mean B pulley lines? I don't have the specifics of the Sonic FR mixer on hand, but if it's the same as older mixers then this length is not really important. The mixer test will correct for it, but not the C pulley length correctly. The C PL limits the B PL, or it did on older ones.HaylingBilly wrote:A Pulleylines were out as well by 7 and 9 cm
OK guys before you go to all this measuring stuff, which is not really needed. Stretch all the bridles to symmetric . Compensate and level mixer for reduced B limit(shrunk C PL and other reasons). Adjust Z, most likely loosen, till kite flys as you like.
Well why would you assume it would be longer? Where ever you got that information has not consulted realitydirenc wrote: Confusion starts when you expect a line to be longer and it turns out to be shorter because of shrinkage, etc...