Contact   Imprint   Advertising   Guidelines

Kitesurfing with a diy foil kite

For all foil kite riders
Rein de Vries
Rare Poster
Posts: 6
Joined: Tue Apr 30, 2019 2:42 pm
Kiting since: 1995
Local Beach: Rockanje - The Netherlands
Style: Free ride
Gear: Flysurfer Sonic, Ozone R1, Ocean Rodeo, Manta kite foil.
Brand Affiliation: None
Has thanked: 2 times
Been thanked: 0

Kitesurfing with a diy foil kite

Postby Rein de Vries » Mon Jul 01, 2019 7:46 pm

Hey!

Quite some years ago I made a so called Junkie s50, 5m2 foil kite mainly designed for buggying by a dutch designer who also released some nice Arc designs. The fixed bridle tractor like kite was quite advanced with d ribs and sewed needly. Had some fun with it over the years but was not to satisfied with the performance however. It tends to backstall and had some collapsing tips now and then. Furthermore it doensnt fly to quickly i think. Have not given up on it however 😃

Actually I would want to upgrade it a bit, perhaps using a pulleyed bridle as on nowadays foils. To make it suitable for say 5 to 7 bft TT or hydrofoiling. No idea however whether this would anyhow make sense on this kite or how to start.

Anyone any ideas on this? Thanks in anvance for sharing!

foilholio
Very Frequent Poster
Posts: 2740
Joined: Sun Aug 23, 2015 3:20 am
Kiting since: 1337
Local Beach: Ventura Beach
Favorite Beaches: Tarifa
Style: Airstyle
Gear: Foils
Brand Affiliation: None
Has thanked: 117 times
Been thanked: 47 times

Re: Kitesurfing with a diy foil kite

Postby foilholio » Mon Jul 01, 2019 11:08 pm

Buy a Pansh and mod it instead. I think you will learn more that way and have a better kite.

Rein de Vries
Rare Poster
Posts: 6
Joined: Tue Apr 30, 2019 2:42 pm
Kiting since: 1995
Local Beach: Rockanje - The Netherlands
Style: Free ride
Gear: Flysurfer Sonic, Ozone R1, Ocean Rodeo, Manta kite foil.
Brand Affiliation: None
Has thanked: 2 times
Been thanked: 0

Re: Kitesurfing with a diy foil kite

Postby Rein de Vries » Thu Jul 04, 2019 7:29 am

Thanks! Would be an option yes. Why do you think this would be the better way to go, would the 5m2 be to outdated?

MartinO
Rare Poster
Posts: 27
Joined: Wed Aug 05, 2015 8:28 am
Kiting since: 2002
Local Beach: South Sweden
Favorite Beaches: Grönhögen, Sweden
Style: Freeride
Gear: Naish Pivot and Cult
Brand Affiliation: None
Has thanked: 0
Been thanked: 3 times

Re: Kitesurfing with a diy foil kite

Postby MartinO » Thu Jul 04, 2019 7:45 am

Buy is not as fun as build. I would definately give my kite a second chance if I made it myself.

I would recommend to take a close look on a modern foil in about the same size and take a look on how they made the bridle. Then try to transfer that into your design.

elguapo
Frequent Poster
Posts: 416
Joined: Fri Jan 25, 2019 6:01 pm
Favorite Beaches: cabarete, kanaha
Gear: ..
Brand Affiliation: None
Has thanked: 76 times
Been thanked: 80 times

Re: Kitesurfing with a diy foil kite

Postby elguapo » Thu Jul 04, 2019 9:45 am

MartinO wrote:
Thu Jul 04, 2019 7:45 am
Buy is not as fun as build. I would definately give my kite a second chance if I made it myself.

I would recommend to take a close look on a modern foil in about the same size and take a look on how they made the bridle. Then try to transfer that into your design.
kinda depends how we are defining "fun"

it would be much more fun being on the water than in the shop stitching a kite.

Image

Rein de Vries
Rare Poster
Posts: 6
Joined: Tue Apr 30, 2019 2:42 pm
Kiting since: 1995
Local Beach: Rockanje - The Netherlands
Style: Free ride
Gear: Flysurfer Sonic, Ozone R1, Ocean Rodeo, Manta kite foil.
Brand Affiliation: None
Has thanked: 2 times
Been thanked: 0

Re: Kitesurfing with a diy foil kite

Postby Rein de Vries » Fri Jul 05, 2019 6:28 pm

Copying the bridle concepts from a new foil would be something i could try yes. Is there any sw around calculating line lengths given a certain kite design? This would be very helpfull also in diy land I think.

foilholio
Very Frequent Poster
Posts: 2740
Joined: Sun Aug 23, 2015 3:20 am
Kiting since: 1337
Local Beach: Ventura Beach
Favorite Beaches: Tarifa
Style: Airstyle
Gear: Foils
Brand Affiliation: None
Has thanked: 117 times
Been thanked: 47 times

Re: Kitesurfing with a diy foil kite

Postby foilholio » Sat Jul 06, 2019 12:00 am

Rein de Vries wrote:
Thu Jul 04, 2019 7:29 am
Thanks! Would be an option yes. Why do you think this would be the better way to go, would the 5m2 be to outdated?
It should work fine to start with. You can try things but always have the original state to go back too.

kitejumping
Medium Poster
Posts: 119
Joined: Sat Jul 29, 2006 1:35 am
Kiting since: 1999
Gear: Peter Lynn and Flysurfer kites
Location: Dillon, CO
Has thanked: 8 times
Been thanked: 6 times

Re: Kitesurfing with a diy foil kite

Postby kitejumping » Sun Aug 04, 2019 11:12 pm

I made the same kite years ago, started converting it from a fixed bridle to a depower system for snowkiting, I think the plans were from wingine.nl but that site seems gone now. When snowkiting season ended I never got around to finishing the new bridle. I was just going to eyeball the speed system loosely based off other similar sized foil kites.

kitexpert
Very Frequent Poster
Posts: 764
Joined: Sun Aug 09, 2015 11:20 pm
Kiting since: 2003
Gear: many kites, also diy
Brand Affiliation: None
Has thanked: 4 times
Been thanked: 9 times

Re: Kitesurfing with a diy foil kite

Postby kitexpert » Mon Aug 05, 2019 9:36 am

Those kites were primitive traction kites for some fixed AoA. It is quite hopeless to try to convert such to a depowerable kite with a mixer because airfoil inside is very different in shape than what it should be. It is a bit same if you had a granny bike and you asked if it can be modified to a mtb - yes you can drive a granny bike in the mountains but it would suck no matter what you do it.

I repeat, it is not a bridle issue but a kite shape issue. In this case every part is wrong shaped.


Return to “Foil Kites”

Who is online

Users browsing this forum: No registered users and 3 guests

cron