Contact   Imprint   Advertising   Guidelines

Computing Wing Lift

Here you can exchange your experience and datas about your home build boards
Rare Poster
Posts: 41
Joined: Thu Jul 13, 2017 1:48 am
Local Beach: e
Favorite Beaches: e
Style: onshore waveriding
Gear: v
Brand Affiliation: None
Has thanked: 0
Been thanked: 3 times

Computing Wing Lift

Postby lightandfrost » Wed Oct 04, 2017 9:44 am

For those designing wings here is a rough guide to compute approximate lift based on wing surface area.

Lift in Pounds = Surface Area in Square Feet * Velocity in fps * Velocity in fps * coefficient of Lift


L = S * (( V * V ) * C)

* = times or multiples of
L = Lift in Pounds(lbs)
S = Square Area in feet(ft)
V = Velocity in feet per second(fps)
Note: V * V is the square root of V

C = Coefficient of Lift

Note: For purposes here the coefficient of lift is equal to one(1).

To obtain a Square Area in feet of your wing go here: ... g_area.htm

The measurement process computes one(1) side of the total wing area so remember to double the area before applying to the formula to obtain total lift.


1 cm2 = .00107639 ft2

cm2 = square centimeters
ft2 = Square feet

Knots(kts) to fps Chart

kts fps

1 1.68781
2 3.37562
3 5.06343
4 6.75123
5 8.43904
6 10.12685
7 11.81466
8 13.50247
9 15.19028
10 16.87808
11 18.56589
12 20.2537
13 21.94151
14 23.62932
15 25.31713

Using the L = S * (( V * V ) * C) formula a 0.7 square foot wing surface area provides the following lift.

Kts Lift in lbs

1 1.99
2 7.97
3 17.94
4 31.90
5 49.85
6 71.78
7 97.71
8 127.62
9 161.52
10 199.40
11 241.28
12 287.14
13 337.00
14 390.84
15 448.67

In closing readers should remember that a hydrofoil wing/mast combination probably obtains two(2) types of lift. The lift generated by the wings and lift generated by the mast under certain conditions. For list from the mast cross reference the centerboard hydrofoil effect.

Light and Frost

Very Frequent Poster
Posts: 540
Joined: Sat Jan 31, 2004 5:48 pm
Local Beach: Brouwersdam
Style: Hydrofoil - Big Air
Gear: Moses Comet 111 2018
Peter Lynn Aero
Brand Affiliation: Infexion
Peter Lynn
Has thanked: 8 times
Been thanked: 59 times

Re: Computing Wing Lift

Postby evan » Wed Oct 04, 2017 10:14 am

1st grade aeronautical engineer trying to apply his college knowledge to hydrofoiling?

Deriving the lift from a given lift coefficient isn't the hardest part, obtaining that coefficient is and for those who know what you are talking about explaining the basic stuff feels a bit weird when you leave out half the the variables unexplained. What CL and density did you use for example?

L = (1/2) d v^2 s CL

L = Lift, which must equal the airplane's weight in pounds
d = density of the air. This will change due to altitude. These values can be found in a I.C.A.O. Standard Atmosphere Table.
v = velocity of an aircraft expressed in feet per second
s = the wing area of an aircraft in square feet
CL = Coefficient of lift , which is determined by the type of airfoil and angle of attack.

Oh, and try keeping everyting metric without elbows, thumbs and snail speeds for measurements.

User avatar
Very Frequent Poster
Posts: 2008
Joined: Fri Mar 22, 2013 9:17 pm
Style: Wave
Gear: .
Has thanked: 6 times
Been thanked: 22 times

Re: Computing Wing Lift

Postby NYKiter » Fri Oct 20, 2017 3:30 am

These two videos go a long way in explaining wing designs extremely they transfer to water I dont know, but I saw a lot of similar foil designs and I would imagine the principles might be somewhat similar. Guys pretty funny too.

Medium Poster
Posts: 154
Joined: Wed Jun 18, 2003 2:35 pm
Local Beach: Northern Adriatic
East coast Australia
Favorite Beaches: One that I can kite at (and my gear is with me)
Style: very unstylish!
Gear: PL twinskins / BRM Cloud2 17
Home made boards (TT, Low volume surf & a great big weird plan)
Brand Affiliation: None
Has thanked: 1 time
Been thanked: 0

Re: Computing Wing Lift

Postby Mikey » Fri Oct 20, 2017 8:34 am

In the video about wings want flow fences. Haven't seen any on kitefoils!

Curious as to why!!

Return to “Gear Builders”

Who is online

Users browsing this forum: No registered users and 1 guest