Contact   Imprint   Advertising   Guidelines

Pocket board building

Here you can exchange your experience and datas about your home build boards
TomW
Very Frequent Poster
Posts: 2886
Joined: Wed Oct 05, 2005 6:43 pm
Kiting since: 2001
Local Beach: Vejbystrand, Habo Ljung, Lomma
Gear: TW Surfboards 5-0
TW Surfboards hydrofoil board 120 and 135
Moses Fluente 550/590 + 330/325 and 633 set
North Mono 7, 9, 12
Ozone Reo 5
Ozone Hyperlink 9mUL, 7m
Flysurfer Sonic 2 13m
Brand Affiliation: None
Location: Sweden
Has thanked: 14 times
Been thanked: 41 times

Re: Pocket board building

Postby TomW » Wed Jan 02, 2019 4:16 pm

Was playing around on NX CAD program trying to learn it. Designed this foilboard as an exercise.
Ive been thinking of making boards in balsa wood
Hydrofoil_NX1.jpg

TomW
Very Frequent Poster
Posts: 2886
Joined: Wed Oct 05, 2005 6:43 pm
Kiting since: 2001
Local Beach: Vejbystrand, Habo Ljung, Lomma
Gear: TW Surfboards 5-0
TW Surfboards hydrofoil board 120 and 135
Moses Fluente 550/590 + 330/325 and 633 set
North Mono 7, 9, 12
Ozone Reo 5
Ozone Hyperlink 9mUL, 7m
Flysurfer Sonic 2 13m
Brand Affiliation: None
Location: Sweden
Has thanked: 14 times
Been thanked: 41 times

Re: Pocket board building

Postby TomW » Sun Jan 06, 2019 9:53 am

Finished up the 90 cm.

PhotoGrid_1546764771546.jpg

trod27
Medium Poster
Posts: 57
Joined: Sat Jun 23, 2012 4:36 pm
Kiting since: 2005
Local Beach: Utah
Favorite Beaches: Gorge, Los Barilles, Deer Creek
Style: freestyle
Gear: Slingshot, Moses
Brand Affiliation: None
Has thanked: 0
Been thanked: 3 times

Re: Pocket board building

Postby trod27 » Tue Jan 15, 2019 5:03 am

That looks really good. Cant wait to hear how it rides

TomW
Very Frequent Poster
Posts: 2886
Joined: Wed Oct 05, 2005 6:43 pm
Kiting since: 2001
Local Beach: Vejbystrand, Habo Ljung, Lomma
Gear: TW Surfboards 5-0
TW Surfboards hydrofoil board 120 and 135
Moses Fluente 550/590 + 330/325 and 633 set
North Mono 7, 9, 12
Ozone Reo 5
Ozone Hyperlink 9mUL, 7m
Flysurfer Sonic 2 13m
Brand Affiliation: None
Location: Sweden
Has thanked: 14 times
Been thanked: 41 times

Re: Pocket board building

Postby TomW » Thu Jan 17, 2019 5:50 pm

trod27 wrote:
Tue Jan 15, 2019 5:03 am
That looks really good. Cant wait to hear how it rides
Was out last Saturday in 4c. On my Hyperlink 9m, pretty choppy too.
it took a few starts to get used to it and 20 min or so to adjust to such a short platform. But mostly the start technique is different. Have to pop up almost directly.
At speed if I bring board down to skim or bounce it in flying foot transitions, it skims great.

Very pleased with it. Can definitely travel with it.
But if you're not trying to cram it into a hockey bag, I'd say a 100-120 is better pocket size.

TomW
Very Frequent Poster
Posts: 2886
Joined: Wed Oct 05, 2005 6:43 pm
Kiting since: 2001
Local Beach: Vejbystrand, Habo Ljung, Lomma
Gear: TW Surfboards 5-0
TW Surfboards hydrofoil board 120 and 135
Moses Fluente 550/590 + 330/325 and 633 set
North Mono 7, 9, 12
Ozone Reo 5
Ozone Hyperlink 9mUL, 7m
Flysurfer Sonic 2 13m
Brand Affiliation: None
Location: Sweden
Has thanked: 14 times
Been thanked: 41 times

Re: Pocket board building

Postby TomW » Thu Jan 17, 2019 5:57 pm

I'm starting a build using balsa wood as core material.

jespin4845
Very Frequent Poster
Posts: 578
Joined: Mon Dec 19, 2011 2:10 am
Kiting since: 2010
Local Beach: Lake Worth, FL
Jupiter, FL
Style: Freeride/surf
Gear: kites and boards
Brand Affiliation: None
Has thanked: 0
Been thanked: 4 times

Re: Pocket board building

Postby jespin4845 » Thu Jan 17, 2019 7:29 pm

how are you gonna do the balsa? laminate sheets together or another way?

TomW
Very Frequent Poster
Posts: 2886
Joined: Wed Oct 05, 2005 6:43 pm
Kiting since: 2001
Local Beach: Vejbystrand, Habo Ljung, Lomma
Gear: TW Surfboards 5-0
TW Surfboards hydrofoil board 120 and 135
Moses Fluente 550/590 + 330/325 and 633 set
North Mono 7, 9, 12
Ozone Reo 5
Ozone Hyperlink 9mUL, 7m
Flysurfer Sonic 2 13m
Brand Affiliation: None
Location: Sweden
Has thanked: 14 times
Been thanked: 41 times

Re: Pocket board building

Postby TomW » Wed Jan 30, 2019 2:06 pm

jespin4845 wrote:
Thu Jan 17, 2019 7:29 pm
how are you gonna do the balsa? laminate sheets together or another way?
I've bought planks 100*10*0,8 cm then edge glued together with CA glue. I'll then vacuum bag 3 layers 8mm with an additional 2,5 mm layer of " heavy " balsa to deck.
I can get various thickness and 3 different densities of balsa from local RC model supply.

I'll vbag them to a rocker form..

Not sure it will work.

thewindego
Medium Poster
Posts: 85
Joined: Wed Jan 18, 2017 3:13 am
Kiting since: 2000
Local Beach: Wolfe Island
Gear: core and windego boards
Brand Affiliation: None
Has thanked: 1 time
Been thanked: 3 times
Contact:

Re: Pocket board building

Postby thewindego » Wed Jan 30, 2019 3:07 pm

Typically end grain balsa is used in composite sandwich construction.
https://www.3accorematerials.com/en/products

Really high performance but a pita for any shaping as it tears away from the scrim backer. You might add some foam rail that are shapeable and get a nice core that way.

User avatar
Leelanau
Rare Poster
Posts: 7
Joined: Thu Jul 27, 2017 9:42 pm
Kiting since: 2015
Local Beach: Good Harbor, Frankfort
Gear: TT & Foil
Brand Affiliation: None
Has thanked: 3 times
Been thanked: 0

Re: Pocket board building

Postby Leelanau » Tue Feb 05, 2019 2:53 pm

TomW - just out of curiosity, what did you pay for the bigHead inserts? I reached out to the US Distributor and was quoted about $12 each for a minimum order of 30. That was for a M8 x 15mm. For a 100+ unit order the price is about $6.50 each. I didn't expect them to be cheap given that they're made in the UK, but wasn't expecting quite that steep a price. Ouch...

I have sourced more conventional 316 stainless T-nuts at just over $1 each and am hoping those will be enough.

-Peter

grigorib
Very Frequent Poster
Posts: 1556
Joined: Mon Aug 01, 2016 8:12 pm
Kiting since: 2009
Local Beach: OBX; Clinton Lake, IL; Lake Michigan; Tawas, MI; SPI; La Ventana
Gear: Kites: Slingshot Rally 5/7/9/11m, Slingshot Turbine 9m, Flysurfer Speed4 10m, Peter Lynn Venom II ARC 16m
Boards: Spleene RIP 37, Flysurfer Flydoor5 XL, Slingshot/Moses 80/91/105cm masts 590/683s/633 wings, Tim's 36" "woody", Slingshot Dwarfcraft 42", MBS Comp 95x

For sale: LF CPR 55cm bar $160
Brand Affiliation: None
Has thanked: 36 times
Been thanked: 64 times

Re: Pocket board building

Postby grigorib » Tue Feb 05, 2019 11:49 pm

TomW wrote:
Sun Jan 06, 2019 9:53 am
Finished up the 90 cm.


PhotoGrid_1546764771546.jpg
Tom,
what's your stance width?

For 633 my rear foot is directly above rear mast plate bolt and from outer toe to outer toe it ends up in 30" or so


Return to “Gear Builders”

Who is online

Users browsing this forum: No registered users and 0 guests

cron