If you specify your question I can try to measure it on my Connect bar. However the Connect bar which is the bar of the Peak 4 is high y bar which is quite rare, what means roughly the Y point is ca. 10 m above the trimm so it is not a simple low v 4 line bar. The Connect bar is nice light bar so I would recommend that one. If you want some budget solution I would rather look for some old(2010-2017) 5 line North bar however the really old ones quite heavy which might change the feel of this ligth bar pressure kite. The 2016 North Clickbar has an option to make it a very high y bar so as far as I know that could be the closest duplicate to the Connect bar but this is also a heavier bar and the lines migth shrink.Sefiz wrote: ↑Wed Dec 11, 2019 8:29 pmI want to install a 5th reef line on a non-Flysurfer bar to ride a peak.
I tried to find, at which height the Flysurfer bar has attached the safety line to the holding line, but I can not find it in the net.
Anyone knows the height of the attachment point? Measured from top / end of lines would also help.
I would like to know, at which point a flysurfer bar, like the Connect Bar, has the safety line attached to the holding line.f you specify your question I can try to measure it on my Connect bar.
Users browsing this forum: No registered users and 1 guest