A forum dedicated to Hydrofoil riders
-
beebad
- Frequent Poster
- Posts: 457
- Joined: Mon May 23, 2016 2:44 pm
- Kiting since: 2016
- Weight: 173
- Local Beach: Mayo, Rehobeth bay, dewey bch,OBX
- Favorite Beaches: North flats, outlaws-South Padre Island, Waves, Salvo, kitepoint, the washout, tower rd. Assateaque.
- Style: Freeride
- Gear: 7m, 9m, 12m Cabrinha Switchblades, 15 Contra, Cabrinha 144 Spectrum, 137 ACE, Litewave Dave WING 155, Ugo, GP6B, slingshot hoverglide nf2 foil-35",15"24" masts, slingshot dwarfcraft 54" foilboard. Slingwing 5.4V2., quatro drifter 5’6”.
- Brand Affiliation: None
- Location: Kent Island
-
Has thanked:
252 times
-
Been thanked:
17 times
Postby beebad » Sat Jan 26, 2019 6:08 pm
A friend of mine cautioned me about the hardware on this foil I just got in the mail!
HAs anyone seen any hardware failures with this foil?
Thanks
-
ap888
- Frequent Poster
- Posts: 284
- Joined: Thu Sep 13, 2018 2:24 am
- Local Beach: Zion/K peir/Inver/Goderich
- Favorite Beaches: Good wind/Flat water/Good waves
- Style: Foil/Loops/Big Air/Strapless
- Gear: Ozone Uno V2 4m
North Neo (17) 5m
Cabrinha Drifter (16) 8m
Flysurfer Sonic 2 -11m
Moses
BWS Stallion 5’
CrazyFly Shox Custom 135
Groove Skate
Ride Engine
- Brand Affiliation: HFL
-
Has thanked:
13 times
-
Been thanked:
10 times
Postby ap888 » Sat Jan 26, 2019 7:14 pm
Have a HoverglideNF2 used for 2 seasons and the bolts that connect fuselage to mast are getting loose ish (loosing tolerance) from taking them out every session always made sure not a spec of sand was on bolts or inserts to minimize loosing tolerance... would imagine all foils do this after time ?...but luckily only ride fresh water... so loaded them up with medium strength lock tight so can still come out in future if needed but haven’t came loose since then
So your good for 2 years anyways
-
juandesooka
- Very Frequent Poster
- Posts: 1193
- Joined: Wed Aug 29, 2012 8:05 pm
- Kiting since: 2011
- Local Beach: Sooke, BC, Canada
- Style: Canada's Kai Lenny (in my mind)
- Gear: Ocean Rodeo wings&kites / GoFoil
- Brand Affiliation: Open to offers
-
Has thanked:
88 times
-
Been thanked:
97 times
Postby juandesooka » Sat Jan 26, 2019 7:35 pm
I have just experienced loosening bolts on sup wing. From wipe outs in over large surf....widened the channel the mast slides into. I am told by others too that nonpermanent blue loctite is the answer.
Other side of this equation. ...slime up your bolts with tefgel and periodically re apply so they don't become permanently bonded.
Return to “Hydrofoil”
Who is online
Users browsing this forum: No registered users and 419 guests