A forum dedicated to Hydrofoil riders
-
Big Wally
- Medium Poster
- Posts: 100
- Joined: Sun Jul 24, 2016 3:31 pm
- Local Beach: Tanzania
- Favorite Beaches: Wherever there is Blue water
- Style: Ocean only
- Gear: Undecided
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
1 time
Postby Big Wally » Sun May 19, 2019 2:57 pm
I’m looking for a mast adapter so that I can attach my Ketos mast to my Slingshot Alien Air board that has a track. The Ketos mast has ONE screw on top of Mast. Any guidance would be appreciated.
Thanks in advance!
BW
-
Breze
- Frequent Poster
- Posts: 347
- Joined: Sun Sep 23, 2018 5:53 pm
- Kiting since: 2003
- Weight: 90kg
- Style: Foiling
- Gear: Foils&Tubes
- Brand Affiliation: None
-
Has thanked:
93 times
-
Been thanked:
103 times
Postby Breze » Sun May 19, 2019 3:26 pm
For this issue i have the kf Box Out, have a look at the Ketos page. If you want to use the 1 screw set up, you have to drill a hole threw your AA. Epoxy it ,drill with M6 at the right place. Take a longer M6 screw and a washer, done.
-
Breze
- Frequent Poster
- Posts: 347
- Joined: Sun Sep 23, 2018 5:53 pm
- Kiting since: 2003
- Weight: 90kg
- Style: Foiling
- Gear: Foils&Tubes
- Brand Affiliation: None
-
Has thanked:
93 times
-
Been thanked:
103 times
Postby Breze » Sun May 19, 2019 3:30 pm
Of course you can use the kf box Out Adapter as usual , the 1 screw is flush at the bottom of the box
-
Big Wally
- Medium Poster
- Posts: 100
- Joined: Sun Jul 24, 2016 3:31 pm
- Local Beach: Tanzania
- Favorite Beaches: Wherever there is Blue water
- Style: Ocean only
- Gear: Undecided
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
1 time
Postby Big Wally » Sun May 19, 2019 3:38 pm
I prefer not to have to Modify myself and drill new holes.
Thanks
-
Peter_Frank
- Very Frequent Poster
- Posts: 12734
- Joined: Wed Oct 16, 2002 1:00 am
- Brand Affiliation: None
- Location: Denmark
-
Has thanked:
1006 times
-
Been thanked:
1187 times
Postby Peter_Frank » Sun May 19, 2019 9:56 pm
Big Wally wrote: ↑Sun May 19, 2019 3:38 pm
I prefer not to have to Modify myself and drill new holes.
Thanks
Then simply use the carbon adapter as Breze writes.
I know others who do this, if they got a "plate" board they want to use with the KFBox.
I use a carbon adapter for my skimboard, so plate style and then 4 screws
PF
-
Big Wally
- Medium Poster
- Posts: 100
- Joined: Sun Jul 24, 2016 3:31 pm
- Local Beach: Tanzania
- Favorite Beaches: Wherever there is Blue water
- Style: Ocean only
- Gear: Undecided
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
1 time
Postby Big Wally » Sat May 25, 2019 4:19 pm
Is this the adapter? The 4 holes will line up with the track on my Slingshot Alien?
-
faklord
- Frequent Poster
- Posts: 474
- Joined: Sun Jan 09, 2011 6:03 pm
- Brand Affiliation: None
-
Has thanked:
35 times
-
Been thanked:
80 times
Postby faklord » Sat May 25, 2019 4:36 pm
If the track spacing is on your board is 90mm, then yes it should.
-
Attachments
-
Return to “Hydrofoil”
Who is online
Users browsing this forum: arjas, bitxopalo and 144 guests