For all foil kite riders
-
slide
- Very Frequent Poster
- Posts: 502
- Joined: Tue Nov 27, 2018 12:54 pm
- Kiting since: 2003
- Weight: 75kg,now a bit less
- Local Beach: Brancaster Norfolk 46 miles- just need a hard beach
- Favorite Beaches: mablephorpe , cleephorpes uk-just need a hard beach
- Style: landboarding with a petzl work harness
- Gear: old blades and old flysurfer's , ckb/dex carbon landboards, modified airdeck and a home made snow board with barrel wheels ,soul's , spd5's. over 30ish old blades all set up to go ,i like a bit of old skool
- Brand Affiliation: None
- Location: east anglia, uk
-
Has thanked:
55 times
-
Been thanked:
24 times
Postby slide » Sun Jul 07, 2019 9:07 pm
hi all i'm looking for some advice on depower rope lengths/how much travel on a 9metre speed5 and a15metre, speed5 as I have just brought these 2 kites new kite only , and i'm camping at Cleethorpes , uk next weekend and onshores are predicted ,and i'm hoping to get them flying any help appreciated, I have 2 old flexifoil bars , a 500mm for the 9 metre, and a 540mm for the 15metre, thx pete
edit , not getting 9 metre now , while the shop showed 1 left on its website ,they sold out- they now gonna refund me- why are shops so slow in removing what they don't have to sell
Last edited by
slide on Mon Jul 08, 2019 10:19 am, edited 2 times in total.
-
surfer
- Rare Poster
- Posts: 11
- Joined: Fri Jan 21, 2005 6:43 am
- Brand Affiliation: None
- Location: South TX
-
Has thanked:
0
-
Been thanked:
3 times
Postby surfer » Mon Jul 08, 2019 4:00 am
50cm for trow ( bar travel) and 20 cm for trim ( so called depower) is original Flysurfer Cam cleat bar.
I made my own chicken loop and trim adjustments with 55 and 31 cm for cam cleat bar.
Flysurfer race bar 55 cm and 31 cm.
- These users thanked the author surfer for the post:
- slide (Mon Jul 08, 2019 6:34 am)
-
slide
- Very Frequent Poster
- Posts: 502
- Joined: Tue Nov 27, 2018 12:54 pm
- Kiting since: 2003
- Weight: 75kg,now a bit less
- Local Beach: Brancaster Norfolk 46 miles- just need a hard beach
- Favorite Beaches: mablephorpe , cleephorpes uk-just need a hard beach
- Style: landboarding with a petzl work harness
- Gear: old blades and old flysurfer's , ckb/dex carbon landboards, modified airdeck and a home made snow board with barrel wheels ,soul's , spd5's. over 30ish old blades all set up to go ,i like a bit of old skool
- Brand Affiliation: None
- Location: east anglia, uk
-
Has thanked:
55 times
-
Been thanked:
24 times
Postby slide » Mon Jul 08, 2019 5:56 pm
I have the bar for 15 metre all setup-I don't think my arms are long enough for 500 mm travel, so I set it up with about 440 bar travel, and my bar is just under 500mm, but this is my low wind kite so i'll see how I go , but if the bar is too short I do have some older flysurfer bars that are longer if this bar is too short , but i'll suck it and see , I also have a speed3 12metre a speed2 delux 10 metre , an 8metre pyshco4, and a 6metre pulse2 for higher winds
Return to “Foil Kites”