A forum dedicated to Hydrofoil riders
-
Si_B
- Medium Poster
- Posts: 152
- Joined: Thu Aug 11, 2005 8:30 am
- Brand Affiliation: None
- Location: England
-
Has thanked:
13 times
-
Been thanked:
7 times
Postby Si_B » Sun Jun 30, 2019 10:52 pm
Saw a few boards similar to mine today (due to a clinic being done) with the p foil and noticed they were all using a different rear stabiliser than my set up. I’ve got the ST3. Does it make much difference as I think this is supposed to be for the mega-K foil?
Simon
-
PeaBody
- Medium Poster
- Posts: 75
- Joined: Thu Apr 30, 2015 1:45 pm
- Style: Free-ride
- Gear: Anything to fly
- Brand Affiliation: None
-
Has thanked:
8 times
-
Been thanked:
8 times
Postby PeaBody » Tue Jul 02, 2019 8:50 am
I think the ST3 should be used with the P and K wings foils. I have an ST3 with my P foil.
- These users thanked the author PeaBody for the post:
- Si_B (Thu Jul 04, 2019 11:36 pm)
-
Windigo1
- Very Frequent Poster
- Posts: 938
- Joined: Tue Jan 17, 2017 5:57 pm
- Style: Foil foil.. and Old School!
- Gear: Too many to list
- Brand Affiliation: None
-
Has thanked:
63 times
-
Been thanked:
217 times
Postby Windigo1 » Tue Jul 02, 2019 2:32 pm
I have been using the ST1 with the P and F wings it was the only one available when I bought my foil. It works good for me but I never tried the other ones. The ST3 came out at the same time as the Mega K and I have been told it's the one to use wit the Mega K.
- These users thanked the author Windigo1 for the post:
- Si_B (Thu Jul 04, 2019 11:36 pm)
-
Shinnworld2
- Rare Poster
- Posts: 39
- Joined: Sun Jun 26, 2016 4:18 pm
- Local Beach: El Cabezo, Tenerife
- Gear: Shinn, Blade, Da Kine,
- Brand Affiliation: Owner Shinn Kiteboards
-
Has thanked:
0
-
Been thanked:
11 times
Postby Shinnworld2 » Mon Jul 15, 2019 8:38 am
The ST3 stabiliser is recommended with both the P and Mega K foils
-
apollo4000
- Frequent Poster
- Posts: 434
- Joined: Thu Jan 03, 2013 2:27 pm
- Kiting since: 2006
- Local Beach: Camber / Lancing / Whitstable
- Favorite Beaches: The next one
- Style: trying hard
- Gear: All sorts
- Brand Affiliation: Nope. Just a regular Joe.
-
Has thanked:
157 times
-
Been thanked:
48 times
Postby apollo4000 » Sun Jul 21, 2019 10:00 pm
Shinnworld2 wrote: ↑Mon Jul 15, 2019 8:38 am
The ST3 stabiliser is recommended with both the P and Mega K foils
Thx - will and ST3 in 2019 fit the the yellow P-Foil setup from early 2018? Mine came with the yellow ST1?
-
Shinnworld2
- Rare Poster
- Posts: 39
- Joined: Sun Jun 26, 2016 4:18 pm
- Local Beach: El Cabezo, Tenerife
- Gear: Shinn, Blade, Da Kine,
- Brand Affiliation: Owner Shinn Kiteboards
-
Has thanked:
0
-
Been thanked:
11 times
Postby Shinnworld2 » Mon Jul 22, 2019 7:47 am
Yes, The first year the P wing was specified with the Yellow ST1 stabiliser however from last year it is supplied with the larger G10 ST3. yes, ST3 will fit with any generation of Shinn P wing
Return to “Hydrofoil”