Saw a few boards similar to mine today (due to a clinic being done) with the p foil and noticed they were all using a different rear stabiliser than my set up. I’ve got the ST3. Does it make much difference as I think this is supposed to be for the mega-K foil?
Simon
Shinn rear stabilsers
-
PeaBody
- Medium Poster
- Posts: 75
- Joined: Thu Apr 30, 2015 1:45 pm
- Style: Free-ride
- Gear: Anything to fly
- Brand Affiliation: None
- Has thanked: 8 times
- Been thanked: 8 times
Re: Shinn rear stabilsers
I think the ST3 should be used with the P and K wings foils. I have an ST3 with my P foil.
- Rating: 3.03%
-
Windigo1
- Very Frequent Poster
- Posts: 936
- Joined: Tue Jan 17, 2017 5:57 pm
- Style: Foil foil.. and Old School!
- Gear: Too many to list
- Brand Affiliation: None
- Has thanked: 63 times
- Been thanked: 217 times
Re: Shinn rear stabilsers
I have been using the ST1 with the P and F wings it was the only one available when I bought my foil. It works good for me but I never tried the other ones. The ST3 came out at the same time as the Mega K and I have been told it's the one to use wit the Mega K.
- Rating: 3.03%
-
Shinnworld2
- Rare Poster
- Posts: 39
- Joined: Sun Jun 26, 2016 4:18 pm
- Local Beach: El Cabezo, Tenerife
- Gear: Shinn, Blade, Da Kine,
- Brand Affiliation: Owner Shinn Kiteboards
- Has thanked: 0
- Been thanked: 11 times
-
apollo4000
- Frequent Poster
- Posts: 434
- Joined: Thu Jan 03, 2013 2:27 pm
- Kiting since: 2006
- Local Beach: Camber / Lancing / Whitstable
- Favorite Beaches: The next one
- Style: trying hard
- Gear: All sorts
- Brand Affiliation: Nope. Just a regular Joe.
- Has thanked: 157 times
- Been thanked: 48 times
Re: Shinn rear stabilsers
Thx - will and ST3 in 2019 fit the the yellow P-Foil setup from early 2018? Mine came with the yellow ST1?Shinnworld2 wrote: ↑Mon Jul 15, 2019 8:38 amThe ST3 stabiliser is recommended with both the P and Mega K foils
-
Shinnworld2
- Rare Poster
- Posts: 39
- Joined: Sun Jun 26, 2016 4:18 pm
- Local Beach: El Cabezo, Tenerife
- Gear: Shinn, Blade, Da Kine,
- Brand Affiliation: Owner Shinn Kiteboards
- Has thanked: 0
- Been thanked: 11 times
Re: Shinn rear stabilsers
Yes, The first year the P wing was specified with the Yellow ST1 stabiliser however from last year it is supplied with the larger G10 ST3. yes, ST3 will fit with any generation of Shinn P wing
- These users thanked the author Shinnworld2 for the post:
- apollo4000 (Mon Jul 22, 2019 4:43 pm)
- Rating: 3.03%
Who is online
Users browsing this forum: Brent NKB and 118 guests