Contact   Imprint   Advertising   Guidelines

quick release ejecting accidentally

Forum for kitesurfers
szert
Rare Poster
Posts: 19
Joined: Tue Jul 30, 2019 9:38 pm
Kiting since: 0
Local Beach: Camber Sands, UK
Gear: looking for...
Brand Affiliation: None
Has thanked: 25 times
Been thanked: 0

quick release ejecting accidentally

Postby szert » Wed Sep 04, 2019 6:55 pm

The quick release on my 2017 (?) Airush bar has ejected twice today without activating. It happened both times when the kite had a bigger pull (not extreme).

I tested on land and seems impossible to eject it by pulling although i couldn't the same load on it as on water.

Experienced kiters told i might just accidentally touched the release thingy. indeed it is quite sensitive.

It never happened before but I only been on the water ca. 15 times yet.

Any advice what i am doing wrong or is it issue with my bar?

kite_hh
Frequent Poster
Posts: 210
Joined: Tue Apr 17, 2018 5:33 pm
Kiting since: 9
Gear: Cabrinha, North, own
Brand Affiliation: None
Has thanked: 30 times
Been thanked: 15 times

Re: quick release ejecting accidentally

Postby kite_hh » Wed Sep 04, 2019 7:33 pm

I don't know all quick releases around.

Do you care to provide some pictures in general or of yours in particular? Maybe add a little more info on when and how it happened while you are at it.

dice
Medium Poster
Posts: 85
Joined: Sun Jun 10, 2018 6:05 pm
Kiting since: 2012
Style: Freeride
Gear: Hadlow ID
Brand Affiliation: None
Has thanked: 1 time
Been thanked: 8 times

Re: quick release ejecting accidentally

Postby dice » Wed Sep 04, 2019 7:36 pm

Only been about 15 times on the water? Can we assume you're still a rookie?
Maybe you're pulling the bar all the way in too often and by doing so you might hit the QR in a particular way that makes it release?

Da Yoda
Very Frequent Poster
Posts: 834
Joined: Wed Dec 14, 2005 6:20 pm
Kiting since: 2005
Style: Strapless Freestyle, Wave, Freeride
Gear: Firewire/Tomo Surfboards
Loyd Surfboards
Brand Affiliation: iKitesurf
Location: Western USA
Has thanked: 2 times
Been thanked: 22 times

Re: quick release ejecting accidentally

Postby Da Yoda » Wed Sep 04, 2019 8:17 pm

I've heard some say that the bulk of an impact/float vest can sometimes make contact against a QR and cause an accidental release. If your QR is "sensitive" this could be the issue. Do you wear a vest?

szert
Rare Poster
Posts: 19
Joined: Tue Jul 30, 2019 9:38 pm
Kiting since: 0
Local Beach: Camber Sands, UK
Gear: looking for...
Brand Affiliation: None
Has thanked: 25 times
Been thanked: 0

Re: quick release ejecting accidentally

Postby szert » Wed Sep 04, 2019 8:35 pm

kite_hh wrote:
Wed Sep 04, 2019 7:33 pm
I don't know all quick releases around.

Do you care to provide some pictures in general or of yours in particular? Maybe add a little more info on when and how it happened while you are at it.
it's an airush progression bar from 2017 i think.
it looks like the image below.

both occasions were when the kite made a sudden big pull. So likely i was pulling the bar all the way in but tbh not sure as so many things were happening :)))
airush-progression-2018-bar-152030.jpg
airush-progression-2018-bar-152030.jpg (18.94 KiB) Viewed 539 times
Last edited by szert on Wed Sep 04, 2019 8:41 pm, edited 1 time in total.

szert
Rare Poster
Posts: 19
Joined: Tue Jul 30, 2019 9:38 pm
Kiting since: 0
Local Beach: Camber Sands, UK
Gear: looking for...
Brand Affiliation: None
Has thanked: 25 times
Been thanked: 0

Re: quick release ejecting accidentally

Postby szert » Wed Sep 04, 2019 8:36 pm

Da Yoda wrote:
Wed Sep 04, 2019 8:17 pm
I've heard some say that the bulk of an impact/float vest can sometimes make contact against a QR and cause an accidental release. If your QR is "sensitive" this could be the issue. Do you wear a vest?

no impact vest...

szert
Rare Poster
Posts: 19
Joined: Tue Jul 30, 2019 9:38 pm
Kiting since: 0
Local Beach: Camber Sands, UK
Gear: looking for...
Brand Affiliation: None
Has thanked: 25 times
Been thanked: 0

Re: quick release ejecting accidentally

Postby szert » Wed Sep 04, 2019 8:37 pm

dice wrote:
Wed Sep 04, 2019 7:36 pm
Only been about 15 times on the water? Can we assume you're still a rookie?
Maybe you're pulling the bar all the way in too often and by doing so you might hit the QR in a particular way that makes it release?
indeed, rookie. 100m ride is my personal record so far. :)
Maybe I'm pulling too much, but it boggles me that it never happened before and today 2x ..

joekitetime
Medium Poster
Posts: 85
Joined: Fri Aug 31, 2018 4:58 pm
Kiting since: 1999
Local Beach: Sherman
Style: surf, foil, wake, plywood
Gear: wainman, slingshot, homegrown
Brand Affiliation: None
Has thanked: 56 times
Been thanked: 17 times

Re: quick release ejecting accidentally

Postby joekitetime » Wed Sep 04, 2019 8:47 pm

I wrap a rubber band around mine to keep it from sliding out too easily. It works. Can still punch out no problem if need be.

I think if the tolerance is a tad too much or the the thing gets a tad worn it punches out easier.
These users thanked the author joekitetime for the post:
szert (Thu Sep 05, 2019 9:46 am)
Rating: 10%

User avatar
alexeyga
Very Frequent Poster
Posts: 970
Joined: Thu May 31, 2007 12:41 pm
Kiting since: 2007
Favorite Beaches: Ocean shore!
Style: Freeride dongling
Gear: No brand affiliation
Location: Montreal, Canada / NJ, USA
Has thanked: 0
Been thanked: 12 times

Re: quick release ejecting accidentally

Postby alexeyga » Wed Sep 04, 2019 9:38 pm

These are actually fairly hard to activate by accident, unless either there's something bogus going on with it - or you're doing something what you aren't aware of.

Have you picked it up used? Are both elastics there? In what condition is the release mechanism?
These users thanked the author alexeyga for the post:
szert (Thu Sep 05, 2019 9:46 am)
Rating: 10%

Foil
Very Frequent Poster
Posts: 837
Joined: Mon Oct 23, 2017 7:44 pm
Kiting since: 2001
Local Beach: New brighton beach-Derby pool end,Wallasey, near Liverpool
Favorite Beaches: holidays - Flag beach and Matas bay + sotavento on fuerteventura
Home - New Brighton,Rhosneigr, Ainsdale, Fleetwood, Newbrough
Style: improving foiler.
Gear: Groove Skate 130L, naked carbon,gold stripes
101cm Moses Carbon mast
71+90cm Slingshot masts with moses adaptor
Moses- 633 and 683s and 790 wing sets
Ozone V2 Hyperlink 7mtr
Ozone Chrono V3 UL foil kites - 9/11/13/15/
Ozone Hyperlink V1 ultra light 5mtr
Ozone compact V4 bars,click in, 15-23 mtr lines
very dusty Nobile 50/50 twin tip
massive grin
Brand Affiliation: None
Has thanked: 46 times
Been thanked: 94 times

Re: quick release ejecting accidentally

Postby Foil » Thu Sep 05, 2019 9:27 am

the small elastic bungees inside the release may well be too weak.
the ones in my v4 ozone quick release were way too "slack" and I had quite a few releases caused by just brushing the release upwards with my,
arm- once,
impact vest-twice
and catching on the side of my foil board just before waterstarting, 4 times!
easily fixed.
just pulled one end of each little bungee out of its hole with fine nose pliers and moved the stop knot nearly 2cm down,checked it worked as predicted, which it did,
(I did take it too far at first and it needed too much force to push out the release , but because I did not cut off the tail of the small bungee elastic I could alter it a little)
now its perfect.
however due to the foil board catching the lip of the quick release in bumby seas when pushing the board down from body dragging out, then I also ground down the excessive size of the quick release lip, not something you need to bother with on a Ttip.
These users thanked the author Foil for the post:
szert (Thu Sep 05, 2019 9:45 am)
Rating: 10%


Return to “Kitesurfing”

Who is online

Users browsing this forum: Bing [Bot], gl, Google [Bot], juandesooka, MSN [Bot] and 13 guests

cron