Contact   Imprint   Advertising   Guidelines

OR Flite Self Launch Mishaps

Forum for kitesurfers
ThickAir
Medium Poster
Posts: 165
Joined: Tue Jun 17, 2008 12:43 am
Kiting since: 0
Brand Affiliation: None
Has thanked: 3 times
Been thanked: 3 times

OR Flite Self Launch Mishaps

Postby ThickAir » Tue Oct 08, 2019 5:58 pm

I've got a 14.5m Flite that I often have trouble self launching (drag method) because the bridles are so freaking long. The upwind bridle almost always gets caught on the wingtip when self launching. Anyone figured out a good way to keep this from happening? Thanks

Bill C
Medium Poster
Posts: 173
Joined: Sun Aug 06, 2006 8:01 pm
Kiting since: 0
Brand Affiliation: None
Location: Portland, Oregon
Has thanked: 9 times
Been thanked: 5 times

Re: OR Flite Self Launch Mishaps

Postby Bill C » Tue Oct 08, 2019 6:09 pm

Watch the first 10 seconds of this video.


ThickAir
Medium Poster
Posts: 165
Joined: Tue Jun 17, 2008 12:43 am
Kiting since: 0
Brand Affiliation: None
Has thanked: 3 times
Been thanked: 3 times

Re: OR Flite Self Launch Mishaps

Postby ThickAir » Tue Oct 08, 2019 6:31 pm

Bill, that's cheating. Anyone do regular anchor-less launches?

chibern
Medium Poster
Posts: 56
Joined: Wed Sep 20, 2017 5:37 pm
Kiting since: 2017
Local Beach: SoCal
Style: Spastic
Gear: Anything
Brand Affiliation: None
Has thanked: 11 times
Been thanked: 2 times

Re: OR Flite Self Launch Mishaps

Postby chibern » Tue Oct 08, 2019 6:58 pm

Do you put some sand on the upwind portion of the canopy?

ThickAir
Medium Poster
Posts: 165
Joined: Tue Jun 17, 2008 12:43 am
Kiting since: 0
Brand Affiliation: None
Has thanked: 3 times
Been thanked: 3 times

Re: OR Flite Self Launch Mishaps

Postby ThickAir » Tue Oct 08, 2019 7:17 pm

chibern wrote:
Tue Oct 08, 2019 6:58 pm
Do you put some sand on the upwind portion of the canopy?
No. What does that do? Does it hold the bridle down so it can't slip around the wingtip?

chibern
Medium Poster
Posts: 56
Joined: Wed Sep 20, 2017 5:37 pm
Kiting since: 2017
Local Beach: SoCal
Style: Spastic
Gear: Anything
Brand Affiliation: None
Has thanked: 11 times
Been thanked: 2 times

Re: OR Flite Self Launch Mishaps

Postby chibern » Tue Oct 08, 2019 7:34 pm

Seems to slow down the rotation of the kite some and make it pivot around the weighted wing so maybe the lines are not moving around as much to get wrapped up. I have a OR 14.5 Flite too.

I don't use this exact method but close...

User avatar
purdyd
Very Frequent Poster
Posts: 1240
Joined: Mon Jan 06, 2003 1:00 am
Has thanked: 77 times
Been thanked: 52 times

Re: OR Flite Self Launch Mishaps

Postby purdyd » Tue Oct 08, 2019 7:54 pm

That is a good video but a couple of things I’ve learned,

You can pre turn the kite on the ground, that can make it a bit easier and it also

Helps keep the upwind rear line which you pull on from wrapping over the kite. I’ve actually begun starting with me more down wind to make sure that line goes under the kite.

Also, if you note in the video the bar is upside down and only pull on the upwind rear line until the kite gets up into a c.

One you flip the bar over, walk back down wind because the kite is normally farther down into the wind than where you would launch assisted or tethered.

Moving back down wind will reduce the power on the launch.

I’m not sure why the bridle catches on the Flite, as just moving back to launch should pull them clear.

I always clear out the bridles when I rig, and double check they aren’t caught on anything.

Maybe you should video a launch? It might show you what is happening.

Good luck!

juandesooka
Very Frequent Poster
Posts: 1021
Joined: Wed Aug 29, 2012 8:05 pm
Kiting since: 2011
Local Beach: Sooke, BC, Canada
Style: Canada's Kai Lenny (in my mind)
Gear: Ocean Rodeo / Stringy Foil / Slingshot Surf Foil
Brand Affiliation: Open to offers
Has thanked: 34 times
Been thanked: 37 times

Re: OR Flite Self Launch Mishaps

Postby juandesooka » Tue Oct 08, 2019 8:22 pm

ThickAir wrote:
Tue Oct 08, 2019 6:31 pm
Bill, that's cheating. Anyone do regular anchor-less launches?
Anchor is what I do, mainly because we don't have rocky beaches. Seems like less to go wrong, as you can be sure lines are right, no bridle wraps, etc, before you get the kite in the air.
These users thanked the author juandesooka for the post (total 3):
Peter_Frank (Tue Oct 08, 2019 8:43 pm) • knotwindy (Tue Oct 08, 2019 9:31 pm) • Bill C (Tue Oct 08, 2019 10:27 pm)
Rating: 30%

Bill C
Medium Poster
Posts: 173
Joined: Sun Aug 06, 2006 8:01 pm
Kiting since: 0
Brand Affiliation: None
Location: Portland, Oregon
Has thanked: 9 times
Been thanked: 5 times

Re: OR Flite Self Launch Mishaps

Postby Bill C » Tue Oct 08, 2019 10:16 pm

ThickAir wrote:
Tue Oct 08, 2019 6:31 pm
Bill, that's cheating. Anyone do regular anchor-less launches?
If I launched without an anchor, my leading edge would look like it was attacked by ninja knives due to all the sharp shells no matter how minimal I drug it across the sand.

Bill C
Medium Poster
Posts: 173
Joined: Sun Aug 06, 2006 8:01 pm
Kiting since: 0
Brand Affiliation: None
Location: Portland, Oregon
Has thanked: 9 times
Been thanked: 5 times

Re: OR Flite Self Launch Mishaps

Postby Bill C » Tue Oct 08, 2019 10:26 pm

chibern wrote:
Tue Oct 08, 2019 6:58 pm
Do you put some sand on the upwind portion of the canopy?
No sand. Just set the kite on its wing tip and walk back. Same when I land. If the kite is bouncing around due to wind, I lay my hand on the top steering line and walk back to the control bar or towards the kite when I land. Make sure where the wing tip is sitting, there aren't protruding sticks or shells with sharp edges. Also make sure your lines aren't crossed before launching. If its windy, depower your bar.

I've owned Liquid Force, Naish, Ozone, Switch and Cloud kites using the same procedure at nauseam.

Launching without an anchor or with back lines looks cool, but I eventually cut my kite with shells.


Return to “Kitesurfing”

Who is online

Users browsing this forum: edt, MSN [Bot] and 10 guests

cron