omg wrote: ↑Wed Feb 26, 2020 9:46 am
How thick these both wings are? Cannot find info on them.
dave1986 wrote: ↑Wed Feb 26, 2020 1:46 pm
omg wrote: ↑Wed Feb 26, 2020 9:46 am
How thick these both wings are? Cannot find info on them.
Moses do not usually publish the thickness. Will need somebody to measure it.
Go and check on Moses website which bolt length is required/supplied to attach the wings. Whenever there was any significant change - Moses made sure to require shorter/longer bolts (for same fuselage)
P.S. I had a minute to do that myself.
1x W720 - Carbon Front
Wing 720 Balz Pro
3x Flat Head Screw M6x
25mm
1x W679 - Carbon Front
Wing 679
3x Flat Head Screw Torx M6x
25mm
1x MW633 - Carbon Front
Wing 633
3x Flat Head Screws Torx M6x
30mm
1x W790 - Carbon Front
Wing 790
1x Flat Head Screw Torx M6x
35mm
2x Flat Head Screw Torx M6x
30mm
1x W1100 - Carbon Front
Wing 1100
1x Flat Head Screws Torx M6x
35mm
2x Flat Head Screws Torx M6x
30mm
1x W873 - Carbon Front
Wing 873
1x Flat Head Screws Torx M6x
45mm
2x Flat Head Screws Torx M6x
50mm
You can see that 720 and 679 are about same thickness, then goes 633, then 790-1000 and the thickest 873.
I'd guess the 1100 would be a better wing, though at some point volume of the wing is going to start impacting and helping the floatation