Contact   Imprint   Advertising   Guidelines

GoPro line mounts

Here you can exchange your experience and datas about your home build boards
norcom
Very Frequent Poster
Posts: 573
Joined: Mon Jun 23, 2008 11:51 pm
Style: waves
Gear: Too much to list these days. Currently mostly a v3 Cabo's and Spleene Zone fan
Location: Florida
Has thanked: 10 times
Been thanked: 50 times

Re: GoPro line mounts

Postby norcom » Wed Apr 01, 2020 3:51 pm

SaulOhio wrote:
Wed Apr 01, 2020 11:02 am
I use the Smart Remote. But I do have to make cutouts for the power button and a hole for a screwdriver.

All that's needed now is to make foam rubber inserts and a good day with wind.

Awesome! How long does it take you to CNC it? I've had a Harbor Freight Mini Mill sitting in the garage for years but I've mostly just used it as a drill press. I have no idea how to use it as a mill but always wanted to convert it to a CNC. Never bothered because it's just more money and time. The 3d printer peaked my interest in design and making things again, may have to look into it.

Can't wait to hear how it works!

User avatar
SaulOhio
Frequent Poster
Posts: 467
Joined: Sun Dec 19, 2010 1:26 pm
Local Beach: Mentor Headlands
Edgewater
Conneaut harbor
Fairport Harbor
Simms Park
Favorite Beaches: Kite Point in the Outer Banks
Gear: Slingshot Turbines, RPMs and SSTs.
Slingshot Misfit 132, Glide.
Home built hydrofoils.
Ozone R1's, 17M, 13M, 10M, 7M
Brand Affiliation: None
Has thanked: 37 times
Been thanked: 17 times
Contact:

Re: GoPro line mounts

Postby SaulOhio » Wed Apr 01, 2020 4:22 pm

norcom wrote:
Wed Apr 01, 2020 3:51 pm

Awesome! How long does it take you to CNC it? I've had a Harbor Freight Mini Mill sitting in the garage for years but I've mostly just used it as a drill press. I have no idea how to use it as a mill but always wanted to convert it to a CNC. Never bothered because it's just more money and time. The 3d printer peaked my interest in design and making things again, may have to look into it.

Can't wait to hear how it works!
I think its around 15 minutes of cutting time. The software says 9 minutes, but it seems to always underestimate the time.

Sometimes taking material away is a faster way to make something than adding it. Especially the larger of a thing you want to make. I mostly use it to make molds for hydrofoils.

norcom
Very Frequent Poster
Posts: 573
Joined: Mon Jun 23, 2008 11:51 pm
Style: waves
Gear: Too much to list these days. Currently mostly a v3 Cabo's and Spleene Zone fan
Location: Florida
Has thanked: 10 times
Been thanked: 50 times

Re: GoPro line mounts

Postby norcom » Wed Apr 01, 2020 4:54 pm

Yeah, it's always easier to break things. ;)

I think one of the neatest things to print with is rubber (other than Ti probably). May not be very durable but still cool! Made a plug and did a short line test.

So unless there are line arms or a second plug the camera falls down without a lot of angle and tension on the lines. Even the short arms I tried earlier worked much better. I tried adding a small plug to make the safety line hole smaller but still free and no change. Oh well, guess I'll make a version with extruded arms to test again.

It needs to be seen how much this will affect the video in actual use. The Max may still be able to compensate for this with it's stabilization. Considering the line angle I tested is much smaller than what's at the bar above the Y split, perhaps it'll be good enough.
Attachments
Screen Shot 2020-04-01 at 11.18.40 AM.png
Screen Shot 2020-04-01 at 11.18.53 AM.png
Screen Shot 2020-04-01 at 11.18.29 AM.png
Screen Shot 2020-04-01 at 11.18.10 AM.png
These users thanked the author norcom for the post:
SaulOhio (Thu Apr 02, 2020 2:15 pm)
Rating: 3.03%

User avatar
SaulOhio
Frequent Poster
Posts: 467
Joined: Sun Dec 19, 2010 1:26 pm
Local Beach: Mentor Headlands
Edgewater
Conneaut harbor
Fairport Harbor
Simms Park
Favorite Beaches: Kite Point in the Outer Banks
Gear: Slingshot Turbines, RPMs and SSTs.
Slingshot Misfit 132, Glide.
Home built hydrofoils.
Ozone R1's, 17M, 13M, 10M, 7M
Brand Affiliation: None
Has thanked: 37 times
Been thanked: 17 times
Contact:

Re: GoPro line mounts

Postby SaulOhio » Thu Apr 02, 2020 2:17 pm

I'm probably going to have to add arms to my design, too. But I can glue them on. I just bought a high temperature hot glue gun that works with HDPE. Not sure how I will make them.

User avatar
SaulOhio
Frequent Poster
Posts: 467
Joined: Sun Dec 19, 2010 1:26 pm
Local Beach: Mentor Headlands
Edgewater
Conneaut harbor
Fairport Harbor
Simms Park
Favorite Beaches: Kite Point in the Outer Banks
Gear: Slingshot Turbines, RPMs and SSTs.
Slingshot Misfit 132, Glide.
Home built hydrofoils.
Ozone R1's, 17M, 13M, 10M, 7M
Brand Affiliation: None
Has thanked: 37 times
Been thanked: 17 times
Contact:

Re: GoPro line mounts

Postby SaulOhio » Thu Apr 02, 2020 3:16 pm

Here's someone else that posted a very simple design on Shapeways. I've used that company before. Anyone can order one made based on a design posted on their website.

GoPro Max Kite Line Mount v1.0
ShapewaysGoPro2.png
I like the way he has the line brackets set at an angle so the rider isn't going to be in the stitch seam.
ShapewaysGoPro1.png
These users thanked the author SaulOhio for the post:
norcom (Fri Apr 03, 2020 2:10 am)
Rating: 3.03%

jorg
Medium Poster
Posts: 106
Joined: Mon Jun 02, 2014 3:06 am
Local Beach: Toronto, ON
Style: Big Air
Gear: Ten Velox, XR, Ozone Edge
Brand Affiliation: None
Has thanked: 44 times
Been thanked: 7 times

Re: GoPro line mounts

Postby jorg » Thu Apr 02, 2020 4:56 pm

Thanks a lot for sharing your work here. can't wait to try your mounts :wink:

User avatar
SaulOhio
Frequent Poster
Posts: 467
Joined: Sun Dec 19, 2010 1:26 pm
Local Beach: Mentor Headlands
Edgewater
Conneaut harbor
Fairport Harbor
Simms Park
Favorite Beaches: Kite Point in the Outer Banks
Gear: Slingshot Turbines, RPMs and SSTs.
Slingshot Misfit 132, Glide.
Home built hydrofoils.
Ozone R1's, 17M, 13M, 10M, 7M
Brand Affiliation: None
Has thanked: 37 times
Been thanked: 17 times
Contact:

Re: GoPro line mounts

Postby SaulOhio » Fri Apr 03, 2020 1:52 am

I got to try it for the first time, and I am very happy with it. I had an uneventful session with no kite crashes or massive jumps, so it wasn't a full test, but I am satisfied so far.

These users thanked the author SaulOhio for the post:
norcom (Fri Apr 03, 2020 2:10 am)
Rating: 3.03%

norcom
Very Frequent Poster
Posts: 573
Joined: Mon Jun 23, 2008 11:51 pm
Style: waves
Gear: Too much to list these days. Currently mostly a v3 Cabo's and Spleene Zone fan
Location: Florida
Has thanked: 10 times
Been thanked: 50 times

Re: GoPro line mounts

Postby norcom » Fri Apr 03, 2020 2:10 am

SaulOhio wrote:
Thu Apr 02, 2020 3:16 pm

I like the way he has the line brackets set at an angle so the rider isn't going to be in the stitch seam.

Sweet! I like that idea. I'll have to add that to the flat mount test I was working on. This design still poses tangle issues but at least the rider will be out of the stitch line.

You beat me to it! :) Glad you got to try it out. Did you get a chance to try and loop it to see how it reacts to the lines going around it? What's up with the messed up stitch line on the video? Did you just grab the raw file and uploaded it to youtube?

jorg
Medium Poster
Posts: 106
Joined: Mon Jun 02, 2014 3:06 am
Local Beach: Toronto, ON
Style: Big Air
Gear: Ten Velox, XR, Ozone Edge
Brand Affiliation: None
Has thanked: 44 times
Been thanked: 7 times

Re: GoPro line mounts

Postby jorg » Fri Apr 03, 2020 2:15 am

There is a stitching problem in the video
I think you messed it up while resizing the video (720p).
Anyhow very promising, no arms, or mounts in the frame, very clean
SaulOhio wrote:
Fri Apr 03, 2020 1:52 am
I got to try it for the first time, and I am very happy with it. I had an uneventful session with no kite crashes or massive jumps, so it wasn't a full test, but I am satisfied so far.

These users thanked the author jorg for the post:
SaulOhio (Fri Apr 03, 2020 10:12 am)
Rating: 3.03%

User avatar
SaulOhio
Frequent Poster
Posts: 467
Joined: Sun Dec 19, 2010 1:26 pm
Local Beach: Mentor Headlands
Edgewater
Conneaut harbor
Fairport Harbor
Simms Park
Favorite Beaches: Kite Point in the Outer Banks
Gear: Slingshot Turbines, RPMs and SSTs.
Slingshot Misfit 132, Glide.
Home built hydrofoils.
Ozone R1's, 17M, 13M, 10M, 7M
Brand Affiliation: None
Has thanked: 37 times
Been thanked: 17 times
Contact:

Re: GoPro line mounts

Postby SaulOhio » Fri Apr 03, 2020 10:14 am

jorg wrote:
Fri Apr 03, 2020 2:15 am
There is a stitching problem in the video
I think you messed it up while resizing the video (720p).
Anyhow very promising, no arms, or mounts in the frame, very clean
I just noticed that this morning. That was after editing with Cyberlink Powerdirector.


Return to “Gear Builders”

Who is online

Users browsing this forum: No registered users and 119 guests