Contact   Imprint   Advertising   Guidelines

How to build a bar? Just the rod/pole item ~60cm. Anyone done it?

Here you can exchange your experience and datas about your home build boards
merl
Frequent Poster
Posts: 427
Joined: Tue May 15, 2007 8:43 pm
Kiting since: 1999
Gear: Mixed, flysurfer peak, concept air pulsion, wave & firefly, various LEIs. Mostly HF these days.
Brand Affiliation: None
Location: Sweden
Has thanked: 58 times
Been thanked: 33 times

Re: How to build a bar? Just the rod/pole item ~60cm. Anyone done it?

Postby merl » Wed Apr 08, 2020 7:18 am

tomtom wrote:
Sat Apr 04, 2020 7:31 am
teftelja wrote:
Fri Apr 03, 2020 11:16 pm
If it is down, full release?
full release is not an option - it can submerge - you will loose it probably
Needs bladders. Only half kidding. Or what about just replacing the wingtip mesh with a sock valve?

Edit: moved discussion to a new theead
Last edited by merl on Wed Apr 08, 2020 12:10 pm, edited 1 time in total.

tomtom
Very Frequent Poster
Posts: 1592
Joined: Sun Nov 03, 2002 1:00 am
Has thanked: 18 times
Been thanked: 188 times

Re: How to build a bar? Just the rod/pole item ~60cm. Anyone done it?

Postby tomtom » Wed Apr 08, 2020 8:30 am

For these concerns - you really need put something like balloon or condom into tips. Through drain hole it is possible without any mods. It can be mouth inflated without pump.
Or just dont drop your kite. Its actually quite easy with Peaks.

But this is bar thread! :)

teftelja
Rare Poster
Posts: 50
Joined: Sat Jul 13, 2019 9:05 pm
Local Beach: Novorossiysk, Russia.
Gear: Bandits 2018 10,8,6. Foil Rdb, surf tomo evo, twintip.
Brand Affiliation: None
Has thanked: 1 time
Been thanked: 8 times

Re: How to build a bar? Just the rod/pole item ~60cm. Anyone done it?

Postby teftelja » Thu Apr 09, 2020 11:38 am

117 g
Attachments
IMG_20200409_133228.jpg

Mikey
Medium Poster
Posts: 156
Joined: Wed Jun 18, 2003 2:35 pm
Local Beach: Northern Adriatic
East coast Australia
Favorite Beaches: One that I can kite at (and my gear is with me)
Style: very unstylish!
Gear: PL twinskins / BRM Cloud2 17
Home made boards (TT, Low volume surf & a great big weird plan)
Brand Affiliation: None
Has thanked: 1 time
Been thanked: 0

Re: How to build a bar? Just the rod/pole item ~60cm. Anyone done it?

Postby Mikey » Mon Apr 13, 2020 11:46 am

Jyoder wrote:
Tue Aug 07, 2018 1:58 am
First foil session with DIY carbon bar on 17m cloud and 5-15mph winds averaging 7-10mph, very variable and gusty. Bar performed amazingly well and extra throw and depower made handling the gusts much easier with such a big kite. Really loaded up the bar pressure but no flex noticeable. Lack of bar ends made it easy to slide hand up and grab leader line to yank more turn at bottom of kiteloop to save a kite dunk. Only adjustment I need to make is maybe shorten center line below bar to make it easier to reach bar after letting go. Love the light weight and feel. Bar unspins itself so quick and easy. No inertia.
Ciao Jyroder,

OT (sorry to others)

I have a BRM bar on my C17 and wonder if a bit more length would help with depowered turning (have to pull in to get it to move). Love the simplicity of the BRM bar, although I did make some removable winders (I really able to lazy to do it the "right" way)!

What legnth are you using (60cm)? I was thinking of going 65cm or even 70 :o .

Thanks,

Mike


Return to “Gear Builders”

Who is online

Users browsing this forum: No registered users and 3 guests