Here you can exchange your experience and datas about your home build boards
-
teftelja
- Rare Poster
- Posts: 50
- Joined: Sat Jul 13, 2019 9:05 pm
- Local Beach: Novorossiysk, Russia.
- Gear: Bandits 2018 10,8,6. Foil Rdb, surf tomo evo, twintip.
- Brand Affiliation: None
-
Has thanked:
1 time
-
Been thanked:
8 times
Postby teftelja » Wed Jul 01, 2020 2:46 pm
I thought it was xps and was asking about its maker/brand. Did you add microballoons in pigmented layer? Thanks in advance for explanation.
-
jumptheshark
- Very Frequent Poster
- Posts: 2169
- Joined: Fri Nov 10, 2017 6:36 pm
- Local Beach: Shhhhh
- Favorite Beaches: Nude
- Gear: The good stuff
- Brand Affiliation: None
-
Has thanked:
387 times
-
Been thanked:
707 times
Postby jumptheshark » Wed Jul 01, 2020 3:29 pm
TomW wrote: ↑Wed Jul 01, 2020 2:30 pm
No sanding or polishing at all.
That's a pretty major point! Super cool you get both nice clean deck texture and great looking overall finish without loads of finishing work!
- These users thanked the author jumptheshark for the post:
- TomW (Wed Jul 01, 2020 5:26 pm)
-
TomW
- Very Frequent Poster
- Posts: 3585
- Joined: Wed Oct 05, 2005 6:43 pm
- Kiting since: 2001
- Local Beach: Vejbystrand, Lomma
- Gear: TW Surfboards hydrofoil board 110
Gong Veloce M, 100cm carbon mast
Ozone Hyperlink V1 7m
Hyperlink V2 9m, 13m
Concept Air Wave 4,5m
- Brand Affiliation: None
- Location: Sweden
-
Has thanked:
53 times
-
Been thanked:
193 times
Postby TomW » Wed Jul 01, 2020 5:28 pm
jumptheshark wrote: ↑Wed Jul 01, 2020 3:29 pm
TomW wrote: ↑Wed Jul 01, 2020 2:30 pm
No sanding or polishing at all.
That's a pretty major point! Super cool you get both nice clean deck texture and great looking overall finish without loads of finishing work!
The sanding coat is sanded with orbital sander, the final gloss is not sanded. The deck is lightly sanded before texture.
-
TomW
- Very Frequent Poster
- Posts: 3585
- Joined: Wed Oct 05, 2005 6:43 pm
- Kiting since: 2001
- Local Beach: Vejbystrand, Lomma
- Gear: TW Surfboards hydrofoil board 110
Gong Veloce M, 100cm carbon mast
Ozone Hyperlink V1 7m
Hyperlink V2 9m, 13m
Concept Air Wave 4,5m
- Brand Affiliation: None
- Location: Sweden
-
Has thanked:
53 times
-
Been thanked:
193 times
Postby TomW » Wed Jul 01, 2020 5:31 pm
teftelja wrote: ↑Wed Jul 01, 2020 2:46 pm
I thought it was xps and was asking about its maker/brand. Did you add microballoons in pigmented layer? Thanks in advance for explanation.
Oh. The Surfboard blank comes from ocean Magic in UK. This time I didn't add microballons to the sanding coat. It worked better, the microballons tend to get air bubbles and doesn't flow out even. The straight pigmented epoxy flows and any pinholes are clearly evident.
-
grandeand
- Medium Poster
- Posts: 123
- Joined: Fri Oct 16, 2015 12:21 pm
- Local Beach: Italy..Calabrone, fiumaretta, lo stagnone
- Gear: Principiante
- Brand Affiliation: None
-
Has thanked:
4 times
-
Been thanked:
5 times
Postby grandeand » Wed Jul 01, 2020 10:15 pm
Wauhhhhh tom...it's beautiful...
- These users thanked the author grandeand for the post:
- TomW (Thu Jul 02, 2020 10:31 am)
-
TomW
- Very Frequent Poster
- Posts: 3585
- Joined: Wed Oct 05, 2005 6:43 pm
- Kiting since: 2001
- Local Beach: Vejbystrand, Lomma
- Gear: TW Surfboards hydrofoil board 110
Gong Veloce M, 100cm carbon mast
Ozone Hyperlink V1 7m
Hyperlink V2 9m, 13m
Concept Air Wave 4,5m
- Brand Affiliation: None
- Location: Sweden
-
Has thanked:
53 times
-
Been thanked:
193 times
Postby TomW » Thu Jul 02, 2020 10:35 am
I tested the board yesterday. Felt like a huge board to me. My friend who is just learning to fly back n forth thought it felt small compared to his old foil fish.
My feeling was the front hook was too far back, I'll probably have to move it. Or he'll just take it off.
-
kollac
- Rare Poster
- Posts: 37
- Joined: Tue Dec 31, 2019 3:15 pm
- Local Beach: Upstate NY
- Favorite Beaches: I've only got one :)
- Style: freeride
- Gear: A couple of hand-me-down twin tips
- Brand Affiliation: None
-
Has thanked:
6 times
-
Been thanked:
4 times
Postby kollac » Thu Jul 02, 2020 7:53 pm
TomW wrote: ↑Thu Jul 02, 2020 10:35 am
I tested the board yesterday. Felt like a huge board to me. My friend who is just learning to fly back n forth thought it felt small compared to his old foil fish.
My feeling was the front hook was too far back, I'll probably have to move it. Or he'll just take it off.
Hi Tom! I very much like the in-between size and just the overall look of it. Would you be willing to share more dimensions beyond the length? How thick is it in the back/front? How wide? What's the distance from back of the board to the back of the mastplate?
Beautiful work, as always!
-
TomW
- Very Frequent Poster
- Posts: 3585
- Joined: Wed Oct 05, 2005 6:43 pm
- Kiting since: 2001
- Local Beach: Vejbystrand, Lomma
- Gear: TW Surfboards hydrofoil board 110
Gong Veloce M, 100cm carbon mast
Ozone Hyperlink V1 7m
Hyperlink V2 9m, 13m
Concept Air Wave 4,5m
- Brand Affiliation: None
- Location: Sweden
-
Has thanked:
53 times
-
Been thanked:
193 times
Postby TomW » Fri Jul 03, 2020 11:34 am
kollac wrote: ↑Thu Jul 02, 2020 7:53 pm
TomW wrote: ↑Thu Jul 02, 2020 10:35 am
I tested the board yesterday. Felt like a huge board to me. My friend who is just learning to fly back n forth thought it felt small compared to his old foil fish.
My feeling was the front hook was too far back, I'll probably have to move it. Or he'll just take it off.
Hi Tom! I very much like the in-between size and just the overall look of it. Would you be willing to share more dimensions beyond the length? How thick is it in the back/front? How wide? What's the distance from back of the board to the back of the mastplate?
Beautiful work, as always!
475mm wide. About 30mm thick at tail. 10mm right at nose. Rear foil screws are 120mm from tail.
-
kollac
- Rare Poster
- Posts: 37
- Joined: Tue Dec 31, 2019 3:15 pm
- Local Beach: Upstate NY
- Favorite Beaches: I've only got one :)
- Style: freeride
- Gear: A couple of hand-me-down twin tips
- Brand Affiliation: None
-
Has thanked:
6 times
-
Been thanked:
4 times
Postby kollac » Mon Jul 06, 2020 2:43 pm
TomW wrote: ↑Fri Jul 03, 2020 11:34 am
kollac wrote: ↑Thu Jul 02, 2020 7:53 pm
TomW wrote: ↑Thu Jul 02, 2020 10:35 am
I tested the board yesterday. Felt like a huge board to me. My friend who is just learning to fly back n forth thought it felt small compared to his old foil fish.
My feeling was the front hook was too far back, I'll probably have to move it. Or he'll just take it off.
Hi Tom! I very much like the in-between size and just the overall look of it. Would you be willing to share more dimensions beyond the length? How thick is it in the back/front? How wide? What's the distance from back of the board to the back of the mastplate?
Beautiful work, as always!
475mm wide. About 30mm thick at tail. 10mm right at nose. Rear foil screws are 120mm from tail.
tack själv!
-
TomW
- Very Frequent Poster
- Posts: 3585
- Joined: Wed Oct 05, 2005 6:43 pm
- Kiting since: 2001
- Local Beach: Vejbystrand, Lomma
- Gear: TW Surfboards hydrofoil board 110
Gong Veloce M, 100cm carbon mast
Ozone Hyperlink V1 7m
Hyperlink V2 9m, 13m
Concept Air Wave 4,5m
- Brand Affiliation: None
- Location: Sweden
-
Has thanked:
53 times
-
Been thanked:
193 times
Postby TomW » Mon Jul 06, 2020 4:14 pm
kollac wrote: ↑Mon Jul 06, 2020 2:43 pm
TomW wrote: ↑Fri Jul 03, 2020 11:34 am
kollac wrote: ↑Thu Jul 02, 2020 7:53 pm
Hi Tom! I very much like the in-between size and just the overall look of it. Would you be willing to share more dimensions beyond the length? How thick is it in the back/front? How wide? What's the distance from back of the board to the back of the mastplate?
Beautiful work, as always!
475mm wide. About 30mm thick at tail. 10mm right at nose. Rear foil screws are 120mm from tail.
tack själv!
Det är så lite.
Return to “Gear Builders”
Who is online
Users browsing this forum: No registered users and 412 guests