My current equipment is a T40 board, Vorace mast from 2016 (slightly angled backwards), 710 fuse, 633 and 483 stab.
Love the set up but I had tons of front foot pressure so I shimmed the stab a lot to reduce the lift (the gap between fuse and TE of stab approx 2-3 mm)
This works pretty good, but now I think about moving the mast further back on the board and reduce the shims. I will drill new holes or install a track box.
I have seen on newer boards that the mast is placed further back.
Is this a good idea?
If it is, could you advice me about where the mast should be placed?
I also ordered a 679 front wing for the set up.
(Just received an answer from Moses but curios to get more advices)