Forum for kitesurfers
-
gravey
- Medium Poster
- Posts: 155
- Joined: Sat Jul 17, 2004 11:24 am
-
Has thanked:
0
-
Been thanked:
0
Postby gravey » Thu Nov 01, 2007 5:01 pm
Probably an obvious one but - can anybody give me some advice on the setting up of the donkey dick length for the new slingshot rev bar (as mine is not attached and is super long - ooh err). I take it I have to cut the donkey dick to size at the end that has the perspex instest and then feed it through the round black bobble before screwing it to the bar. Does anybody have any further tips on this. Does the hole need to be piloted? Is there an optimum length? Any tips appreciated.
-
vanbo
- Rare Poster
- Posts: 25
- Joined: Wed Nov 16, 2005 3:28 pm
- Brand Affiliation: None
- Location: Belgium, Antwerp
-
Has thanked:
0
-
Been thanked:
0
Postby vanbo » Thu Nov 01, 2007 5:50 pm
I think it is standard quite long.
With my 11 rev bar the donkey dick is 19 cm long measured attached in the chicken loop.
-
shymac
- Very Frequent Poster
- Posts: 1098
- Joined: Thu Jul 27, 2006 6:27 pm
- Local Beach: Stevenson Point break; Sandbar HR; 3-mile; Hatch; Mosier; S.beach Newport. Timberline, Mount Hood Meadows, Whistler, Baker, Steamboat.
- Favorite Beaches: SOCAL/PNW/HI/BCS/????
- Style: Depends on the condition.
- Gear: 2012 RPM 4.5/6/7/8/9/10/12/14
Boots/Strapless/Skim/Wakestake/Snowboard
- Brand Affiliation: Free Agent
- Location: Hood River, Or. USA
-
Has thanked:
0
-
Been thanked:
0
-
Contact:
Postby shymac » Thu Nov 01, 2007 10:35 pm
Donkey dick will be quite long.
This will prevent you from coming out of your spreader bar. The hard 3 inches+ also prevents you from coming out of your spreader bar when going into a tight turn.
You can adjust the size of your chicken loop and if you need to you can cut that donkey some too.
If you don't need it throw that thing in the trash...
-
toyletbowl
- Very Frequent Poster
- Posts: 2808
- Joined: Wed Jan 08, 2003 1:00 am
- Local Beach: Olbrich, Governor Nelson, Tenney, Burrows and McDaniels.
- Favorite Beaches: Olbrich on SW and McDaniels on a SSW.
Sheboygan when it blows hard on a NE.
- Style: Waves, Twin tip and Foilboards.
- Gear: Whatever is available.
- Brand Affiliation: Cabrinha, Slingshot, Core, Armstrong, Axis, NP Surf, Ride engine, Mystic. www.kiteridersllc.com
- Location: Madison, Wi. USA.
-
Has thanked:
0
-
Been thanked:
9 times
-
Contact:
Postby toyletbowl » Thu Nov 01, 2007 11:05 pm
the donkey's dick is probably just plain longer than humans. donkey envy i guess, huh?
if ya got the balls to cut it off a bit...be prepared to run super fast. lol.
done for now.
-
elainepeel
- Rare Poster
- Posts: 4
- Joined: Thu Jul 26, 2007 11:22 pm
- Brand Affiliation: None
- Location: jersey c.i
-
Has thanked:
0
-
Been thanked:
0
Postby elainepeel » Fri Nov 02, 2007 1:46 am
just unscrew it and leave it off and unscrew your chicken loop with the 2 x screws and cut that down to unless you have really long strange long arms !!
i use a hack saw dead easy mate
-
Dax
- Very Frequent Poster
- Posts: 2757
- Joined: Wed Sep 10, 2003 12:41 am
- Brand Affiliation: None
- Location: Portland, Oregon
-
Has thanked:
0
-
Been thanked:
0
Postby Dax » Fri Nov 02, 2007 3:36 am
If you want to cut the dick down to size I'd recommend taking out the plastic piece on the inside (viagra?) Not super hard just twist the plastic back and forth with your two hands, it will come loose.
The stock loop and dick size are real big
, I cut the loop down about 1.5 inches. Don't over cut the dick down, only go about .5 inch for every 1.5 inch taken out of loop.
-
gravey
- Medium Poster
- Posts: 155
- Joined: Sat Jul 17, 2004 11:24 am
-
Has thanked:
0
-
Been thanked:
0
Postby gravey » Fri Nov 02, 2007 12:13 pm
That is great advice. I am not sure which end to screw into tho - the hard or the soft end of the donkey dick.
-
vanbo
- Rare Poster
- Posts: 25
- Joined: Wed Nov 16, 2005 3:28 pm
- Brand Affiliation: None
- Location: Belgium, Antwerp
-
Has thanked:
0
-
Been thanked:
0
Postby vanbo » Fri Nov 02, 2007 6:47 pm
soft end
-
Greenman
- Rare Poster
- Posts: 31
- Joined: Sun Mar 06, 2005 8:20 pm
- Brand Affiliation: None
- Location: Exmouth Devon
-
Has thanked:
0
-
Been thanked:
0
Postby Greenman » Fri Nov 02, 2007 8:09 pm
My one was to big. made the loop smaller and the dick a bit sorter.
makes it all a lot better.
-
Airmiles
- Rare Poster
- Posts: 49
- Joined: Thu Jun 07, 2007 2:06 am
-
Has thanked:
0
-
Been thanked:
0
Postby Airmiles » Fri Nov 02, 2007 9:08 pm
Put it between your legs to make a mangina, switch to toeside & fruit bowl the beach, do it un-hooked to impress the judges!
Return to “Kitesurfing”
Who is online
Users browsing this forum: ak200, andylc, Bing [Bot], bittersvolcom, Brent NKB, bshmng, elrizo, Faxie, FunOnTheWater, Google [Bot], jjm, lightwind, SENDIT!, Slappysan, Vivo3d, Windigo1, Windwarrior, y2kBug and 385 guests