Here you can exchange your experience and datas about your home build boards
-
Duh
- Rare Poster
- Posts: 3
- Joined: Mon May 28, 2012 8:25 am
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby Duh » Mon May 28, 2012 8:59 am
Hi guys,
I went through a lot of posts on this forum about the board graphics, and still is not clear to me what is the best way of printing on a board that is not PBT.
Due to the large surface of the print, rice paper is not in option. Personally, I think of silk which is screen-printed, but would still like to get confirmation from you.
Is PBT can be used on boards that are CNC 3D cut, or only on a flat surface?
-
longwhitecloud
- Very Frequent Poster
- Posts: 3676
- Joined: Fri Sep 11, 2009 3:15 am
- Style: Master Baiter. Oracle of windsport.
- Gear: 2 sets of Flysurfer VMGs 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 15, 18. Foilboards ( Masts 75 90 110 125 Wings 880 950 1100 1350 1750) all with Ronix Ones attached. Soon to retire to Wingfoiling.
-
Has thanked:
108 times
-
Been thanked:
175 times
Postby longwhitecloud » Mon May 28, 2012 9:50 am
i guess pbt has a certain amount of elasticity to flex to certain concaves/channels at some point i would think they need vacuum forming though..? interesting question
-
Duh
- Rare Poster
- Posts: 3
- Joined: Mon May 28, 2012 8:25 am
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby Duh » Wed May 30, 2012 11:03 am
-
plummet
- Very Frequent Poster
- Posts: 6819
- Joined: Sat Aug 29, 2009 11:25 pm
- Local Beach: EE
- Favorite Beaches: NZ
- Style: Terrain riding
- Gear: Old wornout ozone.
Plummet hydrofoil and mutant
- Brand Affiliation: None
-
Has thanked:
11 times
-
Been thanked:
224 times
Postby plummet » Wed May 30, 2012 11:13 am
i bust out the spray gun and paint a graphic myself. What about that for an option?
-
Duh
- Rare Poster
- Posts: 3
- Joined: Mon May 28, 2012 8:25 am
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby Duh » Wed May 30, 2012 2:12 pm
plummet wrote:i bust out the spray gun and paint a graphic myself. What about that for an option?
Thanks plummet for the advice.
I thought about it, but I'm not so skilled with sprays. And I do not know how well will epoxy glue to painted wood.
I would like that the graphics look professional, similar to the factory boards ... but not on PBT.
-
plummet
- Very Frequent Poster
- Posts: 6819
- Joined: Sat Aug 29, 2009 11:25 pm
- Local Beach: EE
- Favorite Beaches: NZ
- Style: Terrain riding
- Gear: Old wornout ozone.
Plummet hydrofoil and mutant
- Brand Affiliation: None
-
Has thanked:
11 times
-
Been thanked:
224 times
Postby plummet » Thu May 31, 2012 7:03 am
paint after you layup your glass then do another resin layer.
think of a simple yet cool design. if you paint it yourself yourl get a lot more saticfaction out of it compared to a graphic someone else has done.
-
Kamikuza
- Very Frequent Poster
- Posts: 7057
- Joined: Fri Jan 09, 2009 4:49 am
- Local Beach: Sabae Beach
- Favorite Beaches: Ol' Stinky
- Gear: This, that, the other
-
Has thanked:
220 times
-
Been thanked:
193 times
Postby Kamikuza » Thu May 31, 2012 7:42 am
I remember seeing a video on here of a guy doing graphics to a board, the order in which he laid the paint and epoxy etc ... looked pretty pro when he was finished. Maybe it was paint ... might have been graphic sheets too ...
-
Laughingman
- Very Frequent Poster
- Posts: 2979
- Joined: Mon Mar 16, 2009 4:35 pm
- Local Beach: Kettle Point, Mitchell's Bay, Rondeau Bay
- Favorite Beaches: Kettle Point, Mitchell's Bay, Rondeau Bay, Long Bay, Cayo Guillermo, La Ventana
- Gear: Ocean Rodeo Gen6 Flites 10m, 12m Gen2 Roams 6m and 8m, Cloud D 4.8, 6.2, 8.0, 10.4
Xeon Laluz, Mako Wide 150, Jellyfish Custom surf board quad fin 6', LF Impulse Foil and Kanaha Shapes 37" board
Engine Harness with slider
- Location: Southwestern Ontario
-
Has thanked:
17 times
-
Been thanked:
17 times
Postby Laughingman » Thu May 31, 2012 5:18 pm
why not print directly to a large sheet of rice paper?
-
mikellli
- Rare Poster
- Posts: 16
- Joined: Sun Jan 29, 2012 1:42 pm
- Local Beach: lake Rusanda
- Gear: HQ SCOUT2 5m
HQ NEO2 8m
mystic shadow 2010
Sims snowboard
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby mikellli » Fri Jun 01, 2012 8:10 pm
Laughingman wrote:why not print directly to a large sheet of rice paper?
It is difficult to find here such a large format of rice paper.
Bought a black 100% silk.
I thinking now to таке paint gun and draw graphics (white) directly on silk, and then to put her in lamination.
Has anyone tried this?
If this is not the good solution for any reason, I hope that someone will stop me in time ...
Duh, have you decided how you are going to do your graphics???
Maybe some pictures ...
-
foam-n-fibre
- Frequent Poster
- Posts: 491
- Joined: Tue Jan 02, 2007 11:50 pm
- Gear: DIY boards and OR kites
- Brand Affiliation: None
- Location: Ottawa, Canada
-
Has thanked:
1 time
-
Been thanked:
8 times
Postby foam-n-fibre » Sat Jun 02, 2012 1:48 am
Do a test with the silk and make sure it does not peel off like peel ply. Generally only cotton is used for graphics, but I have no idea about silk.
Peter
Return to “Gear Builders”
Who is online
Users browsing this forum: No registered users and 120 guests