A forum dedicated to Hydrofoil riders
-
davesails7
- Very Frequent Poster
- Posts: 2220
- Joined: Sun Apr 01, 2007 7:36 pm
- Kiting since: 2006
- Weight: 75 kg
- Local Beach: Virginia Beach
- Style: Race
- Gear: ML B3
R1V2 11. VMG 13, 15, 18
OR Mako 130x35
- Brand Affiliation: None
-
Has thanked:
10 times
-
Been thanked:
22 times
Postby davesails7 » Sat Jan 10, 2015 8:28 pm
Why are most foils not painted? The only major manufacturer that paints the foil that I know of is Aguera.
I think painting a bright color has two advantages:
1. You can see the foil in the water, to help avoid hitting into it.
2. Bright colors don't heat up as much in the sun. Even the best epoxies lose strength when exposed to high heat. black surfaces can easily get into the 180 degree F range when left in the sun, which is a danger zone for most epoxies. Also, UV will likely degrade the laminate over time.
-
zfennell
- Very Frequent Poster
- Posts: 975
- Joined: Wed Nov 20, 2002 1:00 am
- Brand Affiliation: None
- Location: rhode island
-
Has thanked:
0
-
Been thanked:
0
Postby zfennell » Sun Jan 11, 2015 2:14 pm
All true.
Just not as sexy looking.
....marketing and cosmetics
-
droffats
- Very Frequent Poster
- Posts: 816
- Joined: Wed Dec 20, 2006 2:39 am
- Style: Freeride, Hdrofoil, Waves, Big Air
- Gear: Ozone, Ocean Rodeo, Cabrinha, Mystic
- Brand Affiliation: www.adventurekiteboarding.com
- Location: Kite Shop
-
Has thanked:
9 times
-
Been thanked:
71 times
-
Contact:
Postby droffats » Sun Jan 11, 2015 4:16 pm
I don't know if it is about cosmetics because some really beautiful painting can be done on those extra surfaces. In the bicycle industry a few companies do this, I don't know what you call it, "half tones" maybe? I could see all sorts of beautiful stuff on carbon boards, masts, foils, etc. These are just a couple of examples of what red can look like in the (mostly) cosmetic weave layer.
- Stafford
www.adventurekiteboarding.com
-
Attachments
-
-
-
tkettlepoint
- Very Frequent Poster
- Posts: 782
- Joined: Sun Feb 12, 2006 8:16 pm
- Gear: Jellyfish boards custom boards
- Brand Affiliation: Jellyfish Boards
- Location: Kettle Point Ontario Canada
-
Has thanked:
0
-
Been thanked:
0
Postby tkettlepoint » Sun Jan 11, 2015 8:39 pm
it is called Kandy paint... you can either do it as a base or in the clear coat.. I am doing my carbon foil board this way with a twist.
only down fall is that it cost a shit ton for kandy paints... 1 pint is like 70 bucks ready to spray from my local shop.. might order some from house of kolors or check out TCP and see what they have. You better have some spraying under your belt to tackle Kandy though. Just my 3 cents
just looked into it you can kandy gelcoat also.. that is the way to do it in a mold...
terrie
www.jellyfishboards.com
-
Denisesewa
- Frequent Poster
- Posts: 307
- Joined: Wed Sep 06, 2006 5:12 pm
- Local Beach: SPI
- Style: Freeride Hydrofoil , Surf
- Gear: Cloud quiver, LP foil, MHL foil, DIY foils , Many boards
- Brand Affiliation: None
- Location: S.P.I. TX. / Canon City Co.
-
Has thanked:
6 times
-
Been thanked:
6 times
Postby Denisesewa » Wed Jan 14, 2015 4:40 pm
It hurt my feelings to paint over the carbon, especially after it turned out so nice but for practicality its pretty much a no brainer, the benefits, protection from the sun's heat and UV is the #1 concern , its easier to see and find damage or structural stress cracks with paint before they become catastrophic failures, I've used cosmetic layers of red, blue and silver " Texalium" ( Fake carbon) and found it too gets extremely hot in the sun so I'm not sure candy colors would relieve the problem.
So even though my fat head would like to display my craftsmanship with carbon common sense says paint it. ( and I suck at painting )
Before-
After-
So Terrie, when ya gonna pop a foil out of your new molds?
-
tkettlepoint
- Very Frequent Poster
- Posts: 782
- Joined: Sun Feb 12, 2006 8:16 pm
- Gear: Jellyfish boards custom boards
- Brand Affiliation: Jellyfish Boards
- Location: Kettle Point Ontario Canada
-
Has thanked:
0
-
Been thanked:
0
Postby tkettlepoint » Wed Jan 14, 2015 6:39 pm
Denis started to seal the molds last night ...
I have 2 set of mast moulds cut. one for plate mount and one for custom tuttle mount..
Plus I wouldn't of painted yours just for the fact you can always make another one. Like the work of art of yours the first time... carbon does look sexy for sure
will keep you up dated
thanks
terrie
www.jellyfishboards.com
-
Randahl
- Medium Poster
- Posts: 194
- Joined: Fri Dec 20, 2013 8:49 pm
- Local Beach: SF Bay, San Diego
- Favorite Beaches: San Felipe BC, Mission Bay and San Diego at large, Belmont, C Street, Emma Wood, Ledbetter, Sherman, East Bay
- Style: Foils and Twins
- Gear: Sword 2, Camet, Ozone, F-One
- Brand Affiliation: None
-
Has thanked:
0
-
Been thanked:
0
Postby Randahl » Wed Feb 18, 2015 5:26 pm
Is there any good off the shelf paint you would use for the clear gloss coat on a foil? I put a wet sand finish on a foil and I am going to sell it and buyers are weary of it not being shiny. I don't think I have a thick enough clear coat left to re-gloss it through sanding and buffing. I know I can use polyester resin but I was hoping to use something I can spray that also gets nice and hard but may not require as much sanding and buffing.
-
tkettlepoint
- Very Frequent Poster
- Posts: 782
- Joined: Sun Feb 12, 2006 8:16 pm
- Gear: Jellyfish boards custom boards
- Brand Affiliation: Jellyfish Boards
- Location: Kettle Point Ontario Canada
-
Has thanked:
0
-
Been thanked:
0
Postby tkettlepoint » Wed Feb 18, 2015 8:00 pm
anything you get in a spray can will be soft. but if it is just to make it shinny for the new customer go to the hardware and get a can a clear lacquered home hardware sells it. Or you can go to car quest and pick up a can of clear coat for cars , but will will be soft... will feel hard but finger nails will leave marks...
terrie
-
Pierrot
- Frequent Poster
- Posts: 250
- Joined: Wed Dec 19, 2012 7:07 pm
- Kiting since: 2008
- Weight: 80
- Gear: Aluula Roam 10m, North neo 10m, 7m, 5m
Hydrofoil Ketos,
- Brand Affiliation: None
-
Has thanked:
8 times
-
Been thanked:
52 times
-
Contact:
Postby Pierrot » Thu Feb 19, 2015 12:53 am
Read on the french KBHF forum: seems the one best price / quality compromise is using spray can of Graffiti paint.
Montana is one of the popular brand
http://www.montanacolors.com/
This is probably what I'll be using to repaint my foil before the spring.
Return to “Hydrofoil”
Who is online
Users browsing this forum: Google [Bot] and 266 guests