I had 2 holes in my leading edge bladder. And both patched them well an looked like they were sealed well. However, my kite gets soft sice it leaks slowly of both.
Can I put a bigger patch ontop or do I have to get a new bladder?
Regards!
Leading edge patch question
-
andrewkiter
- Medium Poster
- Posts: 73
- Joined: Mon Jul 30, 2012 12:11 am
- Local Beach: hood river
- Favorite Beaches: la ventana, los barriles
- Style: freestyle, Kiteracing
- Gear: ozone edge and RPM
- Brand Affiliation: None
- Has thanked: 0
- Been thanked: 0
-
Bushflyr
- Very Frequent Poster
- Posts: 893
- Joined: Thu Jul 24, 2014 11:14 pm
- Gear: OR Razor 7m
Caution Spitfire 9m, 10m
Firewire Vanguard 5' 4"
Naish Global 5' 10"
Shinn Monk - Brand Affiliation: None
- Has thanked: 0
- Been thanked: 0
Re: Leading edge patch question
Done properly a patch is stronger than the rest of the bladder. Confirm that it's leaking through the patch (bubble test) then do a proper Aquaseal patch job. Put a good 1/2 to 3/4 of an inch around the outside of the old patch, make sure it lays perfectly flat, and stick a good weight on it overnight or longer.
-
clint2070
- Very Frequent Poster
- Posts: 692
- Joined: Fri Jun 22, 2012 5:40 am
- Local Beach: Strand,Tourmaline,Stinkz,Belmont,Seal.
- Favorite Beaches: C St, Naish beach, tourmaline,Strand, cabarete, San Quintin, La Ventana,Rauls,Nungas,Mancora,
- Style: surf, freeride
- Gear: Naish, Firewire, ride engine,Ford,liquid force, Zeeko.Tomo,
- Brand Affiliation: None
- Has thanked: 1 time
- Been thanked: 8 times
Re: Leading edge patch question
I agree. Almost all bladders can be repaired. Most of the time its an old valve. Run your hand where the leak is along the inside of the leading edge. Just like a bike tire, the object that punctured it might still be lodged inside.