Hey girls and boys!
Ever wanted to build a board? It's not that hard. Follow me on my journey
Got some wood strips, 10mm thick:
Decided about a new board design, blunt copy of some other board. Transparent flowers paper to see how the wood looks under. Most important - avoid the wood knots
This is the board top. Flip the wood strips and double check the bottom wood for a nice look. Flip it again and again till you 100% satisfied. There is no room for error here since one knot can ruin your work.
If all good, mark the wood with pencil from 1...n so you know which is first and last. Pencil the SQUARE outline. Will need it later.
Cut the template off your design and sand it well. Will need it later. I'm using a belt sander here:
TBC