It's about my nipples....

[fokiten]

So what's the proper glue to reattach a loose bladder nipple?
My storage choice seems less than perfect...hot, hot hot!
Thanks
f

[BWD]

thin film of 3m 5200. let it cure under a donut shaped weight.

[fokiten]

3m52, got it....the quest begins...
Thanks man
f

[edt]

Get the red! Fast cure is 24 hours the other stuff takes 7 days lol.

[fokiten]

Yowser, wtf? So back in the day there was this stuff called vinyl bond, it did the job in minutes, but f- me I cannot find it..
Seems they sell this goop by the gallon?
So, humph things remain unchanged-- cluster fucks abound!
Regards
f

[volume311]

Aquaseal, have repaired several valves with it.

https://youtu.be/QHrYULoliUw

[fokiten]

Woo Hoo!
Now we're talking...
As an aside I can't wait for the tongue lashing I'll recieve when I show up with my 2006 kite and my death shackle..
Ha, ought to be fun..
Thanks for the link!
Cheers

[foam-n-fibre]

Aquaseal works great, I have used it a lot, BUT wipe with alcohol first. I had some fail a while ago and did some tests. Wiping with alcohol makes a huge difference and makes a very strong bond. A light sanding improves it a bit (with or without alcohol. But alcohol made the biggest difference by far. If you glue with no surface prep you have a good chance of failure.

Peter

[downunder]

Well,

this. And no other. The most easiest one ever.

http://www.airtimekite.com/index.php/ai ... -trap.html

Also works well with nipples Have fun!

[toddsphresh]

Aquaseal use no substitute