A forum dedicated to Hydrofoil riders
-
jaros
- Very Frequent Poster
- Posts: 587
- Joined: Sun Dec 15, 2002 1:00 am
- Brand Affiliation: None
- Location: Slovenia
-
Has thanked:
33 times
-
Been thanked:
20 times
Postby jaros » Fri Sep 29, 2017 8:37 am
Could a fuselage be made out of G10? I gues there is a reason why nobody is doing it...
-
Tone
- Very Frequent Poster
- Posts: 2291
- Joined: Tue Dec 23, 2003 2:34 pm
-
Has thanked:
5 times
-
Been thanked:
30 times
Postby Tone » Fri Sep 29, 2017 9:08 am
yeah I can't see a reason why not.
It is quite hard to machine and turn though. not sure anyone makes sheets thick enough.
-
gmb13
- Very Frequent Poster
- Posts: 1935
- Joined: Wed Sep 12, 2007 10:19 am
- Kiting since: 1998
- Local Beach: Flag Beach, Fuerteventura
- Style: Everything
- Gear: Indiana, Sailmon
- Brand Affiliation: Indiana, Sailmon
- Location: Fuerteventura
-
Has thanked:
36 times
-
Been thanked:
294 times
Postby gmb13 » Fri Sep 29, 2017 12:14 pm
G10 is way too soft. That is why you cannot make it out of pure G10. We used to use G10 as a core on the original Magma Foil fuses. These were wrapped in carbon to make them stiff. In theory you can make a g10 fuselage, but to achieve the stiffness it would have to be super thick.
--
Gunnar
-
Blackrat
- Frequent Poster
- Posts: 252
- Joined: Thu Mar 12, 2015 4:55 pm
- Local Beach: Jeffreys Bay , South Africa
- Gear: old
- Brand Affiliation: None
- Location: Jeffreys Bay South Africa
-
Has thanked:
0
-
Been thanked:
0
Postby Blackrat » Fri Sep 29, 2017 6:42 pm
As Gunnar says , wrapping with biax carbon will give the piece tortional strength , essential for a nice stiff fuselage
-
atomic-chomik
- Frequent Poster
- Posts: 232
- Joined: Sat Jul 05, 2014 10:33 pm
- Local Beach: The wild west
- Style: Freeride/Surf
- Gear: North Dice 8 and 10m
North Neo 12m
OR Prodigy 7m
OR Prodigy 9.5.
OR Prodigy 12m
2014 Rebel 5m and 8m
OR 17M Flite
OR Duke
Cabrinha Phenom 5'8
- Brand Affiliation: None
-
Has thanked:
1 time
-
Been thanked:
15 times
Postby atomic-chomik » Sun Oct 01, 2017 5:17 am
Why bother? There are better options no?
-
atomic-chomik
- Frequent Poster
- Posts: 232
- Joined: Sat Jul 05, 2014 10:33 pm
- Local Beach: The wild west
- Style: Freeride/Surf
- Gear: North Dice 8 and 10m
North Neo 12m
OR Prodigy 7m
OR Prodigy 9.5.
OR Prodigy 12m
2014 Rebel 5m and 8m
OR 17M Flite
OR Duke
Cabrinha Phenom 5'8
- Brand Affiliation: None
-
Has thanked:
1 time
-
Been thanked:
15 times
Postby atomic-chomik » Sun Oct 01, 2017 5:17 am
Why bother? There are better options no?
-
atomic-chomik
- Frequent Poster
- Posts: 232
- Joined: Sat Jul 05, 2014 10:33 pm
- Local Beach: The wild west
- Style: Freeride/Surf
- Gear: North Dice 8 and 10m
North Neo 12m
OR Prodigy 7m
OR Prodigy 9.5.
OR Prodigy 12m
2014 Rebel 5m and 8m
OR 17M Flite
OR Duke
Cabrinha Phenom 5'8
- Brand Affiliation: None
-
Has thanked:
1 time
-
Been thanked:
15 times
Postby atomic-chomik » Sun Oct 01, 2017 5:17 am
Why bother? There are better options no?
-
NorCalNomad
- Very Frequent Poster
- Posts: 838
- Joined: Thu Feb 13, 2014 4:40 am
- Local Beach: San Francisco
- Gear: Why should it matter?
-
Has thanked:
0
-
Been thanked:
3 times
Postby NorCalNomad » Sun Oct 01, 2017 6:22 am
Wow a fabled triple post.
Yup the cost and material properties makes it not worth it.
-
Bletti
- Frequent Poster
- Posts: 376
- Joined: Thu Feb 26, 2015 9:13 am
- Gear: Slingshot Rally 10m
- Brand Affiliation: None
-
Has thanked:
1 time
-
Been thanked:
0
Postby Bletti » Sun Oct 01, 2017 9:19 am
Yes, you'd be more cost and labour efficient to do a wood core and spend the money on carbon.
Return to “Hydrofoil”