So here it is guys,
a proof that all attachments are waaay off from the design OR the lines shrunk so badly (which I do not believe).
This is particularly important for lines a1, a2 and a3 since we talking 4cm shorter a3 line:
If the kite is powered well and the line a3 is shorter than designed that would fold the kite at the connection point. Assuming everything else is as per design. That can distort any kite to be fair, but we do not know the measurements for other products.
Correct?
I did not measure A1, A2, A -main tho. Will do that and the left kite side as well. The question is how to measure ? We can't take the bridles off, so just measuring from the line start will do as ALL lines should be smaller just by the end loop size (to whatever we looped the line).
Still, the Back line 3cm difference? How to explain that...
Thoughts?
PS
Now I see a1 4cm shorter as well?! Whow. Meaning if a1,2,3 are all 4cm shorter than A1 should be longer to accommodate. Same with a4,5 and A2....