Contact   Imprint   Advertising   Guidelines

Modify a carbon mast to fit a slingshot hoverglide fuselage

Here you can exchange your experience and datas about your home build boards
Brian H
Medium Poster
Posts: 112
Joined: Tue Feb 21, 2017 1:26 am
Kiting since: 2001
Local Beach: Whiterock British Columbia
Favorite Beaches: Hurgada egypt
Style: Foilboarding
Gear: Slingshot kites and boards
Brand Affiliation: None
Has thanked: 1 time
Been thanked: 5 times

Re: Modify a carbon mast to fit a slingshot hoverglide fuselage

Postby Brian H » Sun Mar 03, 2019 5:16 pm

Are you making a 40 inch mast for the new lift one piece foils

BayAreaKite
Rare Poster
Posts: 14
Joined: Tue Jan 08, 2019 11:15 pm
Kiting since: 0
Local Beach: Fay Bainbridge
Favorite Beaches: Squamish, Crissy, Waddell
Style: All types!
Gear: Ozone kites, Project Cedrus foil
Brand Affiliation: Owner of Adherend Innovations / Project Cedrus
Has thanked: 0
Been thanked: 2 times

Re: Modify a carbon mast to fit a slingshot hoverglide fuselage

Postby BayAreaKite » Sun Mar 03, 2019 7:16 pm

I'm not. My tooling allows for up to 90cm / 36in. Which after adapters and mounts approaches 37". I could modify the fixture and go a little longer, but most of my customers are asking for shorter. My target market is not race or speed guys, since I'll be the first to admit my mast is a little draggier due to thicker section which allows me to make it hollow, stiff, and light. But mast drag is peanuts compared to the high lift wings most people are riding it with. Shoot me a message through the site if you're seriously interested in a longer mast or learning more.

User avatar
omg
Very Frequent Poster
Posts: 585
Joined: Sun Oct 31, 2004 2:58 pm
Has thanked: 34 times
Been thanked: 2 times

Re: Modify a carbon mast to fit a slingshot hoverglide fuselage

Postby omg » Sun Mar 03, 2019 7:45 pm

Question, please: I have Moses Fluente with 633 wings, and the 91cm mast in certain situations (waves with low tide and reefs) is a bit too long and I would like to have a shorter mast, abt 70cm would be perfect for these conditions. However, Moses 71cm mast is quite expensive and hence I’m looking for a cheaper alternative, but is there any?

Thanks and sorry about a bit OT.

Andyp
Rare Poster
Posts: 14
Joined: Sat Jun 20, 2015 8:15 am
Kiting since: 1
Local Beach: Far Beach, Seaforth, Whitsundays
Style: Hydrofoil, twintip, landkiting
Gear: Homemade Hydrofoil,
Brand Affiliation: None
Has thanked: 1 time
Been thanked: 1 time

Re: Modify a carbon mast to fit a slingshot hoverglide fuselage

Postby Andyp » Mon Mar 04, 2019 9:21 am

omg wrote:
Sun Mar 03, 2019 7:45 pm
Question, please: I have Moses Fluente with 633 wings, and the 91cm mast in certain situations (waves with low tide and reefs) is a bit too long and I would like to have a shorter mast, abt 70cm would be perfect for these conditions. However, Moses 71cm mast is quite expensive and hence I’m looking for a cheaper alternative, but is there any?

Thanks and sorry about a bit OT.
Hey yes there is a cheaper alternative Houston kiteboarding Have a Moses fuselage to slingshot alloy mast adapter. $70. PLUS $79 for mast base plate.And $90 for 30 inch mast. Cheaper than a smaller carbon mast. I have ordered an adapter waiting for it to arrive in the post Cheers Image
Attachments
Screenshot_2019-03-04-17-48-32.png
These users thanked the author Andyp for the post:
omg (Mon Mar 04, 2019 4:20 pm)
Rating: 10%

grigorib
Very Frequent Poster
Posts: 1738
Joined: Mon Aug 01, 2016 8:12 pm
Kiting since: 2009
Local Beach: OBX; Clinton Lake, IL; Lake Michigan; Tawas, MI; SPI; La Ventana
Gear: Kites: Slingshot Rally 5/7/9/11m, Slingshot Turbine 9m, Flysurfer Speed4 10m standard, Peter Lynn Venom II ARC 16m
Boards: Spleene RIP 37, Flysurfer Flydoor5 XL, Slingshot/Moses 80/91/105cm masts 590/683s/633 wings, Tim's 36" "woody", Slingshot Micro 3'6", MBS Comp 95x

For sale: Slingshot SST 5m 2018 $500, Slingshot SST 6m 2018 $600, Slingshot SST 10m 2017 $500, Core XR4 10m $840, Core XR4 13.5m $970, Core XR4 17m $1060, Slingshot Turbine 5m 2017 like new $450, Slingshot Turbine 15m 2018 like new $1100, BROkite carbon board 140x44 like new complete $650, Slingshot Rally 6m 2017 like new $530, Slingshot Guardian 20" brand new $290
.
Brand Affiliation: None
Has thanked: 54 times
Been thanked: 90 times

Re: Modify a carbon mast to fit a slingshot hoverglide fuselage

Postby grigorib » Mon Mar 04, 2019 7:30 pm

BayAreaKite wrote:
Sun Mar 03, 2019 4:39 pm
... So I actually question the point of most carbon foils. Look at the picture of the lift mast up top, it's all resin.
I wish it was all resin! The core is damn foam.

That mast is en route around half the planet to a dear buddy of mine who got me into kiting. It's better late than never to get him into foiling.
He made few carbon boards before and has access to turning/milling machine to make a fuselage. So that MHL hopefully is getting reincarnated.

P.S. Your and Stringy's works are great. I believe aluminum mast is awesome and affordable solution and when combined with proper bottom it can deliver major riding pleasure and at less cost that carbon mast incurs.

BayAreaKite
Rare Poster
Posts: 14
Joined: Tue Jan 08, 2019 11:15 pm
Kiting since: 0
Local Beach: Fay Bainbridge
Favorite Beaches: Squamish, Crissy, Waddell
Style: All types!
Gear: Ozone kites, Project Cedrus foil
Brand Affiliation: Owner of Adherend Innovations / Project Cedrus
Has thanked: 0
Been thanked: 2 times

Re: Modify a carbon mast to fit a slingshot hoverglide fuselage

Postby BayAreaKite » Mon Mar 04, 2019 11:16 pm

grigorib wrote:
Mon Mar 04, 2019 7:30 pm

I wish it was all resin! The core is damn foam.
The foam absorbs resin as it is infused. It's like a sponge. They are not using a closed-cell foam, which can avoid this problem... but creates other problems with strength if the laminate is not sized properly.

a99
Frequent Poster
Posts: 202
Joined: Tue Jul 18, 2017 11:10 am
Kiting since: 0
Favorite Beaches: Baltic sea
Gear: North, Liquid Force, Blade, Xenon laluz.
Brand Affiliation: None
Has thanked: 0
Been thanked: 8 times

Re: Modify a carbon mast to fit a slingshot hoverglide fuselage

Postby a99 » Tue Jul 09, 2019 3:08 pm

Hi, everyone some how speaking about shorter mast whish to Moses foil, but i dreaming about much much longer mast than is available from Moses or Slingshot, and it's not possible to purchase it, because it's simple not made for purchase - i dreaming about foil mast of 122 cm or 144 cm lenght.
My idea is to melt to slinghot masts for example 41cm+91cm to one mast and put it to moses fuselage (As i have all Onda).

Can someone tell me it''s possible in real life to melt two alumiunn Slingshot masts to one, and it will be ridable and can stand for 74kg weight in normal speed (i'm not speaking about extreme race speeds) ?


Return to “Gear Builders”

Who is online

Users browsing this forum: No registered users and 1 guest

cron