Contact   Imprint   Advertising   Guidelines

Control system by Bracuru

A forum dedicated to Hydrofoil riders
BraCuru
Very Frequent Poster
Posts: 922
Joined: Sat Apr 19, 2008 10:00 pm
Kiting since: 2002
Local Beach: Polish Baltic Coast
Favorite Beaches: Polish Baltic Beach
Style: foilboarding
Gear: Cabrinha Apollo Kites, Moses Hydrofoil, BraCuru Boards, 24Surf.pl
Brand Affiliation: Moses HF, Cabrinha
Has thanked: 10 times
Been thanked: 16 times
Contact:

Re: Control system by Bracuru

Postby BraCuru » Sun Jul 07, 2019 5:44 am

elguapo wrote:
Sat Jul 06, 2019 11:10 am

a QR to me is like insurance.
no one needs insurance until..you know....they actually need it.

i can only recall needing to use a QR once the last few seasons ....but man, i'm glad i had it at that moment.
My system features a QR which kills the kite better than for example this classic one:
viewtopic.php?t=2402072

However it is not dedicated for beginners.
I am testing a similar system for them but with a double flag out (double cleat). Both power lines might be released independently.
There are two symmetrical QR balls connected by one short leash.
Pictures soon.

BTW 1
I won't be popular stating that I have had dozens of accidents and problems due to an accidental release of QR and not a single time I really needed it in last dozen years of kiting.
In emergency I use better ways than QR to come back to safety zone.

BTW 2
Read a summary from one of popular kite schools yesterday that only 3% of beginners practically know how and when to use a QR.
hard to deny that Mr.Wannabee heard that a QR must be used in a case if SOMETHING happens. But he has rather no clue what the SOMETHING means.

BTW 3
Update from IKA for coming competitions: a flag out IS NOT required anymore for RAM kites.

peppedurso
Rare Poster
Posts: 44
Joined: Tue Jul 25, 2017 8:29 pm
Kiting since: 2001
Local Beach: Sicily / Cape Town
Style: Wave Riding
Gear: Cabrinha Drifters
Appletree Klokhuis & Appleflap noseless
Da Kine C-1
Brand Affiliation: Promoter
Has thanked: 0
Been thanked: 1 time

Re: Control system by Bracuru

Postby peppedurso » Sun Jul 07, 2019 8:08 am

BraCuru wrote:
Sun Jul 07, 2019 5:44 am

BTW 2
Read a summary from one of popular kite schools yesterday that only 3% of beginners practically know how and when to use a QR.
hard to deny that Mr.Wannabee heard that a QR must be used in a case if SOMETHING happens. But he has rather no clue what the SOMETHING means.
If a beginner doesn’t know how and when to use the QR then school and instructors failed.

Regis-de-giens
Very Frequent Poster
Posts: 1052
Joined: Thu Jul 31, 2014 2:58 pm
Kiting since: 2002
Local Beach: France: St Laurent du Var, Cannes, Almanarre
Style: 62 kg , light wind
Gear: Conceptair pulsion 15&12&.369 , Elf 11 &7, OR Flite 10m , Airush One 9&6, Rally 6&4.
foil Ketos, Zone, OR mako, snowskis, kite-boat
Brand Affiliation: None
Has thanked: 30 times
Been thanked: 22 times

Re: Control system by Bracuru

Postby Regis-de-giens » Sun Jul 07, 2019 8:19 am

Great ideas here!
Could explain the aim of the black elastic rope on the red ball , and detail when the inox trigger shall be but on one side or on the other side of this elastic ?

ronnie
Very Frequent Poster
Posts: 3931
Joined: Sun Jul 24, 2005 6:39 pm
Has thanked: 15 times
Been thanked: 11 times

Re: Control system by Bracuru

Postby ronnie » Sun Jul 07, 2019 8:32 am

If you really want the minimum system.
The front lines really only hold the kite (and the bar via the stopper) at a certain distance. You could set the stopper at your ideal arm length.

The rear lines are the control lines. So if you had the rear lines going from the kite into the ends of the bar and exiting at the centre of the bar, where they are joined into a single line, then you could trim the power with that single line and steer the kite with the bar while the bar was resting against the stopper. The rear lines have little tension, so it is easier to trim the power with them, than by using the front lines.

It would be a simplified version of what you were doing by manipulating the lines in your (no bar) video?

BraCuru
Very Frequent Poster
Posts: 922
Joined: Sat Apr 19, 2008 10:00 pm
Kiting since: 2002
Local Beach: Polish Baltic Coast
Favorite Beaches: Polish Baltic Beach
Style: foilboarding
Gear: Cabrinha Apollo Kites, Moses Hydrofoil, BraCuru Boards, 24Surf.pl
Brand Affiliation: Moses HF, Cabrinha
Has thanked: 10 times
Been thanked: 16 times
Contact:

Re: Control system by Bracuru

Postby BraCuru » Sun Jul 07, 2019 11:06 am

Regis-de-giens wrote:
Sun Jul 07, 2019 8:19 am
Could explain the aim of the black elastic rope on the red ball , and detail when the inox trigger shall be but on one side or on the other side of this elastic ?
The aim is the same as for a normal QR ball.
Knots of elastic rope are placed outside the ball.
IMO this another mean of tangling into a bridle.
Just compare below.

Two knots outside:
Image

One knot hidden inside:
Image

Less chances for a tangle.

The trigger's position - does not matter IMO. Works well above and underneath the elastic rope.
ronnie wrote: The rear lines are the control lines. So if you had the rear lines going from the kite into the ends of the bar and exiting at the centre of the bar, where they are joined into a single line, then you could trim the power with that single line and steer the kite with the bar while the bar was resting against the stopper. The rear lines have little tension, so it is easier to trim the power with them, than by using the front lines.
Fully agree. It would be easier for often adjustments. However I do not touch depower. I do not need it except emergency situations.

These guys managed to build something similar to your idea what I like a lot:
https://www.kauper-xt.com/bar?fbclid=Iw ... Zk&lang=en

I see one disadvantage of this system now - it would accidentally disconnect pretty easy - especially by the snapshackle.
Not sure why two QRs are needed.
I am sure that Rainer and Yasmin are working on this issue now. I enjoy their way of thinking - out of the box :idea:

ronnie
Very Frequent Poster
Posts: 3931
Joined: Sun Jul 24, 2005 6:39 pm
Has thanked: 15 times
Been thanked: 11 times

Re: Control system by Bracuru

Postby ronnie » Sun Jul 07, 2019 11:44 am

I was thinking of the active control of the power of the kite with one hand and steering with the other from having seen racers trimming the front lines with one hand while steering with the other. They seemed to do that partly to help stabilise their stance, so they could use their weight more to hold more power rather than having to lean toward the kite and losing leverage to hold the power.

That PINTXO bar is a simple way to trim the rear lines - I like it. :thumb:

OzBungy
Very Frequent Poster
Posts: 2147
Joined: Fri Oct 21, 2005 11:35 am
Has thanked: 1 time
Been thanked: 15 times

Re: Control system by Bracuru

Postby OzBungy » Mon Jul 08, 2019 2:37 am

Anybody got any insights into how the Pintxo rear line adjustment works? Short of knocking up a prototype I'm not 100% certain what I am seeing.

I'm guessing:
- the thin black line on the right side is some bungy to keep the slack tidy.
- a slot in the end of the bar stops the adjustment knot from being pulled inside the bar setting the length of the right line.
- the left hand line would have a pulley on the end inside the bar.
- the right hand line passes through that pulley and comes back out through the bar end.
- the pulley shares the change in the right side line with the left side line.

Is it that or something more simple? Can you get away without a pulley?


Return to “Hydrofoil”

Who is online

Users browsing this forum: BraCuru, direnc, juandesooka and 10 guests

cron