Contact   Imprint   Advertising   Guidelines

Inflatable Boards for Winging

Forum for wing surfers
fluidity
Frequent Poster
Posts: 283
Joined: Sat Mar 19, 2016 11:20 pm
Kiting since: 2015
Local Beach: Ngati Toa, Plimmerton, Titahi Bay, Waikanae, Petone, Seatoun, Lyall Bay, Eastbourne, Lake Wairarapa
Favorite Beaches: Plimmerton
Style: Wave, jump
Gear: Late model Switch kites element and nitros,
DIY CAD ultra-concave wave twintips 1500 and 130mm with my own fin designs. Easy upwind, awesome carving. Switch Nitro 10m V7, Naish 5.3m Wing. Now focussing on Wingsurfing to rise to a new challenge. Building my own foils from my CAD design and 3D prints, built a CNC machine last year and now cutting designs with CNC as well as 3D printing.
Location: Porirua New Zealand
Has thanked: 18 times
Been thanked: 17 times

Re: Inflatable Boards for Winging

Postby fluidity » Mon Aug 24, 2020 10:38 am

Horst Sergio wrote:
Sun Aug 23, 2020 8:06 pm
<cut>
To me the lack of a back strap and the weight of 6,4 kg for the 70 l GONG Hype are pretty much enough reasons to cancel it from the list of optional replacements for my Manta.
Agree.Ii don't think a rear strap is needed on the 80kg+ boads as there is a lot of windage with them. As the boards get smaller though, jumping is more likely. And not impressed with the video on the HIPE page showing a jump at around 10? seconds- freeze is and you'll see it's with a non HIPE board that DOES have a footstrap. Misleading.
Pity because with the USA box mast mount, should be easy to ballance load point relative to straps.

But I'm so new :D Still to get up and foil!

dirk8037
Rare Poster
Posts: 15
Joined: Wed Jan 29, 2014 10:57 am
Gear: 145 Underground, SP 19 DL, 13m Takoon Furia, 9/7 Waroo 2007
Brand Affiliation: None
Has thanked: 0
Been thanked: 3 times

Re: Inflatable Boards for Winging

Postby dirk8037 » Fri Aug 28, 2020 8:33 pm

Hi Gunnar

with the posted range of 44L, 71l, 103L, 144L and 157L I wonder where the 120 somthing L is.
With 90kg naked, 103 seems tight and 144 almost to much. It does not seem to be very even.
Are there any changes in wight ?

Cheers Dirk

User avatar
gmb13
Very Frequent Poster
Posts: 1706
Joined: Wed Sep 12, 2007 10:19 am
Kiting since: 1998
Local Beach: Flag Beach, Fuerteventura
Style: Everything
Gear: North Kiteboarding, Moses Hydrofoil, Mystic, Indiana SUP
Brand Affiliation: North Kiteboarding, Moses Hydrofoil, Mystic, Indiana SUP
Location: Fuerteventura
Has thanked: 23 times
Been thanked: 163 times
Contact:

Re: Inflatable Boards for Winging

Postby gmb13 » Sat Aug 29, 2020 11:00 am

dirk8037 wrote:
Fri Aug 28, 2020 8:33 pm
Hi Gunnar

with the posted range of 44L, 71l, 103L, 144L and 157L I wonder where the 120 somthing L is.
With 90kg naked, 103 seems tight and 144 almost to much. It does not seem to be very even.
Are there any changes in wight ?

Cheers Dirk
They will be bringing a 125 also in the near future. Just signed off on the final shape for that.

--
Gunnar

User avatar
Horst Sergio
Very Frequent Poster
Posts: 700
Joined: Thu Oct 29, 2015 10:57 pm
Kiting since: 1999
Favorite Beaches: Every puddle I can find in Central Europe,
the unpopular the better
Style: Slow Style stuntkiting, unhooked foiling
Gear: Just Monofoils, no training wheels ;-)
Ozone chrono; Flysurfer sonic²/r, peak4; Duotone echo
Brand Affiliation: kitejunkie.com 's prank monkey
Has thanked: 65 times
Been thanked: 79 times
Contact:

Re: Inflatable Boards for Winging

Postby Horst Sergio » Sun Oct 18, 2020 7:18 pm

There is again another brand coming up with 3 x iBoards for Winging:

https://grandtoursports.com/alle-produkte/#wing

Image

I also updated my blog with a bit more content about shapes, tricks, jumping, and pics of it:

https://kj4l.com/?p=261
These users thanked the author Horst Sergio for the post:
fluidity (Mon Oct 19, 2020 5:55 am)
Rating: 8.33%

fluidity
Frequent Poster
Posts: 283
Joined: Sat Mar 19, 2016 11:20 pm
Kiting since: 2015
Local Beach: Ngati Toa, Plimmerton, Titahi Bay, Waikanae, Petone, Seatoun, Lyall Bay, Eastbourne, Lake Wairarapa
Favorite Beaches: Plimmerton
Style: Wave, jump
Gear: Late model Switch kites element and nitros,
DIY CAD ultra-concave wave twintips 1500 and 130mm with my own fin designs. Easy upwind, awesome carving. Switch Nitro 10m V7, Naish 5.3m Wing. Now focussing on Wingsurfing to rise to a new challenge. Building my own foils from my CAD design and 3D prints, built a CNC machine last year and now cutting designs with CNC as well as 3D printing.
Location: Porirua New Zealand
Has thanked: 18 times
Been thanked: 17 times

Re: Inflatable Boards for Winging

Postby fluidity » Mon Oct 19, 2020 5:59 am

Horst Sergio wrote:
Sun Oct 18, 2020 7:18 pm
There is again another brand coming up with 3 x iBoards for Winging:

https://grandtoursports.com/alle-produkte/#wing

Image

I also updated my blog with a bit more content about shapes, tricks, jumping, and pics of it:

https://kj4l.com/?p=261
Interesting, they are reportedle doing a large glass fibre mast attachment pad too.

I'm curious as to which manufacturer will be first though, to customise the drop-stitch strand lengths to provide serious contouring.soft side rails aren't so bad but it's much more efficient to have actual corners, edges at the stern of the boards to promote planing and release of water in wake.

fluidity
Frequent Poster
Posts: 283
Joined: Sat Mar 19, 2016 11:20 pm
Kiting since: 2015
Local Beach: Ngati Toa, Plimmerton, Titahi Bay, Waikanae, Petone, Seatoun, Lyall Bay, Eastbourne, Lake Wairarapa
Favorite Beaches: Plimmerton
Style: Wave, jump
Gear: Late model Switch kites element and nitros,
DIY CAD ultra-concave wave twintips 1500 and 130mm with my own fin designs. Easy upwind, awesome carving. Switch Nitro 10m V7, Naish 5.3m Wing. Now focussing on Wingsurfing to rise to a new challenge. Building my own foils from my CAD design and 3D prints, built a CNC machine last year and now cutting designs with CNC as well as 3D printing.
Location: Porirua New Zealand
Has thanked: 18 times
Been thanked: 17 times

Re: Inflatable Boards for Winging

Postby fluidity » Mon Oct 19, 2020 6:01 am

Horst Sergio wrote:
Sun Oct 18, 2020 7:18 pm
There is again another brand coming up with 3 x iBoards for Winging:

https://grandtoursports.com/alle-produkte/#wing

Image

I also updated my blog with a bit more content about shapes, tricks, jumping, and pics of it:

https://kj4l.com/?p=261
Interesting, they are reportedle doing a large glass fibre mast attachment pad too.

I'm curious as to which manufacturer will be first though, to customise the drop-stitch strand lengths to provide serious contouring.soft side rails aren't so bad but it's much more efficient to have actual corners, edges at the stern of the boards to promote planing and release of water in wake.

nixmatters
Frequent Poster
Posts: 413
Joined: Sun Jun 12, 2016 12:38 pm
Kiting since: 2009
Style: freeride. started foiling, not there yet
Gear: mostly custom made
Brand Affiliation: None currently
Has thanked: 154 times
Been thanked: 85 times

Re: Inflatable Boards for Winging

Postby nixmatters » Mon Oct 19, 2020 2:19 pm

fluidity wrote:
Mon Oct 19, 2020 5:59 am

I'm curious as to which manufacturer will be first though, to customise the drop-stitch strand lengths to provide serious contouring.soft side rails aren't so bad but it's much more efficient to have actual corners, edges at the stern of the boards to promote planing and release of water in wake.
The technology exists, I will add some photos later on. I'm afraid the demand for such SUPs is not sufficient.. yet.

fluidity
Frequent Poster
Posts: 283
Joined: Sat Mar 19, 2016 11:20 pm
Kiting since: 2015
Local Beach: Ngati Toa, Plimmerton, Titahi Bay, Waikanae, Petone, Seatoun, Lyall Bay, Eastbourne, Lake Wairarapa
Favorite Beaches: Plimmerton
Style: Wave, jump
Gear: Late model Switch kites element and nitros,
DIY CAD ultra-concave wave twintips 1500 and 130mm with my own fin designs. Easy upwind, awesome carving. Switch Nitro 10m V7, Naish 5.3m Wing. Now focussing on Wingsurfing to rise to a new challenge. Building my own foils from my CAD design and 3D prints, built a CNC machine last year and now cutting designs with CNC as well as 3D printing.
Location: Porirua New Zealand
Has thanked: 18 times
Been thanked: 17 times

Re: Inflatable Boards for Winging

Postby fluidity » Wed Oct 21, 2020 5:41 am

nixmatters wrote:
Mon Oct 19, 2020 2:19 pm
fluidity wrote:
Mon Oct 19, 2020 5:59 am

I'm curious as to which manufacturer will be first though, to customise the drop-stitch strand lengths to provide serious contouring.soft side rails aren't so bad but it's much more efficient to have actual corners, edges at the stern of the boards to promote planing and release of water in wake.
The technology exists, I will add some photos later on. I'm afraid the demand for such SUPs is not sufficient.. yet.
I'd really appreciate that!
I presume existing drop stitching machines have fixed stroke across both warp and weft of the top and bottom fabrice which would make glue-pressing of the PVC/vinyl etc flat layers fairly simple. But it can be argued that if the shape can be made as good, the rigidity close enough to hard board for feet and foil mast then the product can be considered superior to a hard uninflateable board. Currently the price point seems close to 2:1 for hard board vs high pressure inflateable board and I suspect the inflateable SUP technology is only around 10-15 years old. There is definitely room for improvement and manufacturers will tool up if it gives them a reputation for a superior product with the price not being a lot higher. I don't think the basic required modifications are even that difficult. For starters, the side rails aren't a big issue as a foil board never carves, it's sole job is to support the rider high enough to make starting easier and landing easier. The big improvements available are in modifying drop-stitch height between layers and moving the top and bottom material at independently controlled speeds. Between these two very simple changes, you can taper board thickness to the bow, place a small rocking point where hard boards wedge up for the kick onto the foil zone and also control overall curvature of the board. And that kick zone is important too because reducing the stern-tail height reduces the required material for a hard rear end cap which is the best way to improve board release performAance, both for pumping onto the foil and for releasing side touch-downs when in a heeled over turn.
These users thanked the author fluidity for the post (total 2):
irwe (Wed Oct 21, 2020 9:46 am) • nixmatters (Wed Oct 21, 2020 5:52 pm)
Rating: 16.67%

airic
Rare Poster
Posts: 8
Joined: Mon Oct 30, 2017 12:52 pm
Gear: surf tomo evo
Brand Affiliation: None
Has thanked: 2 times
Been thanked: 0

Re: Inflatable Boards for Winging

Postby airic » Wed Oct 21, 2020 5:13 pm



Return to “Wingsurfing”

Who is online

Users browsing this forum: No registered users and 0 guests