Contact   Imprint   Advertising   Guidelines

Slingshot 2021 Sentry V1 Bar (any beta?)

Forum for kitesurfers
Greenturtle
Frequent Poster
Posts: 430
Joined: Fri May 12, 2017 6:51 pm
Local Beach: Presque Isle, Erie PA
Gear: Turbine 19, Flite 14.5, 12, 10, Rally 7
Tons of boards for water, land, and snow
Brand Affiliation: None
Has thanked: 47 times
Been thanked: 75 times

Re: Slingshot 2021 Sentry V1 Bar (any beta?)

Postby Greenturtle » Wed Mar 31, 2021 6:15 am

Have to lay out center lines untwisted. Um. What.

I like the idea of easy one hand click-in QR.

Plastic covered lines running thru bar , meh.

Same tried and true slingshot flying lines , good call.




To me a couple things I like about the ol’ compstick —

-small short compact QR with btb trim results in longer than average amount of bar throw range. Yay

-The Talon. Great option. Yay

- rope. Always supple. See what’s wearing. Plastic can’t crack or whatever if its not there to begin with.

-Line floats are free/not attached to bar so they don’t annoyingly bend in to center.


And the stuff I don’t like about the ol’ compstick—

-With btb trim pulled long, I feel like there is a real risk of the depower rope tangling around the harness hook in such a way that it gets stuck preventing a full release. Could happen (so probably does) Im sure there are horror stories.
-Btb trim requires umph compared to any atb system ive used.



I dunno. I would be into this sentry bar when using a classic harness hook. Having to lay out the center lines right, sheesh, I guess I could live with that.
For rope slider harness , personally, compstick+talon just has it for being so compact and in-close but still robust.

User avatar
jkrug
Very Frequent Poster
Posts: 570
Joined: Fri Jul 22, 2005 1:17 pm
Kiting since: 2005
Weight: 200 lbs
Gear: stuff
Brand Affiliation: None
Has thanked: 10 times
Been thanked: 38 times

Re: Slingshot 2021 Sentry V1 Bar (any beta?)

Postby jkrug » Wed Mar 31, 2021 1:02 pm

when i rig for a foil kite and the bar is right-side up, i usually have no problems with the twist in the center lines, it's when rigging an LEI and the bar is upside down that i often end up with the twist. the twist makes the flow of the bar much less smooth, so you have to redo the lines. i do take the time to straighten it all out with the bar pulled all the way down, but sometimes it's still wrong. a half twist at setup becomes a full twist at flight. regardless, it's so easy to just spin the swivel on other bars, why bother with this nonsense?

User avatar
granit02
Rare Poster
Posts: 11
Joined: Sun Aug 24, 2014 12:28 pm
Kiting since: 2007
Local Beach: Queens beach North Redcliffe Qld Australia
Style: strapless foil and surfboard
Gear: Slingshot SST, GhostV1 and 5'8" Celeritas Slingshot Micro DC
Brand Affiliation: Slingshot Australia
Location: Scarborough
Has thanked: 1 time
Been thanked: 0
Contact:

Re: Slingshot 2021 Sentry V1 Bar (any beta?)

Postby granit02 » Mon Apr 05, 2021 3:21 am

Just had a look on that website, still no rope slider adaptor like the talon, not a big deal its easy enough to slip the chicken loop through the metal ring or around the rope on the rope slider.

fguinda
Rare Poster
Posts: 22
Joined: Wed Jun 26, 2019 8:21 pm
Local Beach: Sotogrande, Spain
Tarifa, Spain
Estepona, Spain
Style: Straplesss
Gear: Slingshot
Brand Affiliation: None
Has thanked: 0
Been thanked: 4 times

Re: Slingshot 2021 Sentry V1 Bar (any beta?)

Postby fguinda » Tue Jun 08, 2021 5:16 pm

granit02 wrote:
Mon Apr 05, 2021 3:21 am
Just had a look on that website, still no rope slider adaptor like the talon, not a big deal its easy enough to slip the chicken loop through the metal ring or around the rope on the rope slider.
just bought a Duotone short rope chicken loop for my Sentry. 100% compatible

Cheoz0r86
Rare Poster
Posts: 26
Joined: Sat Aug 22, 2020 1:23 pm
Kiting since: 2019
Weight: 80-75
Local Beach: North down peninsula in Northern Ireland
Style: Freeride
Gear: 2020 11m, 8m, 7m crazyfly hyper, 2017 11m & 8m North Rebels. , 2020 137x41 crazyfly raptor, 2018 145x42 crazyfly ALR, 2010 134x41 nobile t555
Brand Affiliation: None
Has thanked: 5 times
Been thanked: 9 times

Re: Slingshot 2021 Sentry V1 Bar (any beta?)

Postby Cheoz0r86 » Wed Jun 09, 2021 5:06 pm

granit02 wrote:
Mon Apr 05, 2021 3:21 am
Just had a look on that website, still no rope slider adaptor like the talon, not a big deal its easy enough to slip the chicken loop through the metal ring or around the rope on the rope slider.
I do rig my lines with the bar all the way up (against the stopper ball) that way I avoid any twists, your safety will always be on your right side (left side with the kite in the air). Is quite easy don't get why people find it so hard to get in the coconut

Cheoz0r86
Rare Poster
Posts: 26
Joined: Sat Aug 22, 2020 1:23 pm
Kiting since: 2019
Weight: 80-75
Local Beach: North down peninsula in Northern Ireland
Style: Freeride
Gear: 2020 11m, 8m, 7m crazyfly hyper, 2017 11m & 8m North Rebels. , 2020 137x41 crazyfly raptor, 2018 145x42 crazyfly ALR, 2010 134x41 nobile t555
Brand Affiliation: None
Has thanked: 5 times
Been thanked: 9 times

Re: Slingshot 2021 Sentry V1 Bar (any beta?)

Postby Cheoz0r86 » Wed Jun 09, 2021 5:10 pm

Take a close look at the bar! No twists when you setup properly it only takes an extra 20 sec
Attachments
Screenshot_20210609-170840_Instagram.jpg
Screenshot_20210609-170813_Instagram.jpg

galewarning
Medium Poster
Posts: 85
Joined: Thu Dec 28, 2017 3:48 pm
Local Beach: Any slowly draining lake in the Desert Southwest and the Land of Enchantment.
Favorite Beaches: Any beach that has wind and waves/swell.
Style: Evolving
Gear: 15.5m Switch Helium2, 12m SS RPX, 10m RPM '19, 9m SS UFO 1.1, 8m SS SST, 7m LF NV, 6m SS SST
SS Alien Air/LF Impulse, SS 5'4" Convert [my directional], SS 159 Glide; SS 138 Vision, Nobile Infinity Split Foil [For Sale]
Brand Affiliation: None directly, but I do have friends in the snow and wind sports industries.
Has thanked: 8 times
Been thanked: 1 time

Re: Slingshot 2021 Sentry V1 Bar (any beta?)

Postby galewarning » Thu Jun 10, 2021 4:55 am

Re: 'Coated' main and flagging lines on Sentry bar.

But first a disclaimer: I don't [yet?] have a Sentry bar.
But from researching other bars and visiting Slingshot's web site [see link below for Sentry rebuild videos]...

The black 'coating' of the main and flagging lines on the Sentry bar are not coatings, but a tubing/sleeve material. The flagging line travels thru the stationary tubing/sleeve and the main power line is routed thru more of the black tubing/sleeving material [probably urethane]. I've never had a bar with sleeved lines, so I can't judge it yet without experience. Not being able to visually inspect for line wear bothers me, but having stiffened lines [between the trim block and chicken loop] could potentially reduce any line fowling. The hidden line wear might just be unwarranted worry on my part. Seems a lot of bars now have urethane sleeved lines...

https://support.slingshotsports.com/hc/ ... IPS-HOW-TO

Ciao, -Barry

Sun
Frequent Poster
Posts: 300
Joined: Thu Mar 08, 2007 12:03 am
Local Beach: Tybee Island
Favorite Beaches: Cape Town
Gear: 15m Chrono V2
12m Hyperlink
12m, 10m, 8m Dice (2018)
10m Roca V2
6m Alana (2016)
Naish Stomp 142
Nobile XTR
Nobile Zen Split Foil Board
Zeeko Blaster, Spitfire (Normal & XLW)
Brand Affiliation: None
Has thanked: 50 times
Been thanked: 49 times

Re: Slingshot 2021 Sentry V1 Bar (any beta?)

Postby Sun » Thu Jun 10, 2021 12:24 pm

Yes, it is the industry standard PU sleeve on the outside. One is the loaded main depower line, the other is a hollow tube for the safety. Nothing wrong with that. I still prefer a double bare line, preferably one that is easy to replace, but I am slowly giving up on that dream.

I got to demo this bar shortly, it is quite nice. Auto untwist works well, although like mentioned earlier your lines have to be untwisted fully before launching the kite. Clamcleat depower is as expected. Lines felt like the normal “soft” Slingshot lines, not stiff like SK99 on North Navigator or Ozone bars. Click-in style quick release is excellent. Only real complaint was the bar itself felt a little big (diameter) and it was very hard. It felt like a thick textured plastic tube, almost like a children’s toy. I have flown a lot of bars, and I seem to gravitate toward the softer materials. The North Navigator is excellent in this respect, so that likely biases me against the Sentry.

Still a nice piece of kit.


Return to “Kitesurfing”

Who is online

Users browsing this forum: Google [Bot] and 10 guests