Contact   Imprint   Advertising   Guidelines

Core Sensor 3 Safety Issues (Core statement in initial post)

Forum for kitesurfers
Deaimel
Rare Poster
Posts: 23
Joined: Fri Oct 31, 2014 12:25 am
Local Beach: Anywhere in Ontario
Gear: Core Xr5 9m & 12m
Brand Affiliation: None
Has thanked: 7 times
Been thanked: 4 times

Re: Core Sensor 3 Safety Issues (Core statement in initial post)

Postby Deaimel » Thu Nov 19, 2020 11:53 pm

I'm a long time lurker an I can't say thank you enough to those folks (completely independent from brands) for providing constructive feedback around safety issues (deniska being one of them).
Critics like theirs are pushing brands for higher standards that we can all benefit from.


So-called ambassadors like this should have no place on this forum ¯\_(ツ)_/¯
PinkDuotonePride wrote:
Thu Nov 19, 2020 9:04 pm
Here at duotone we normally take people like deniska to the side of the road and shoot them, it puts them out of their misery, it's the humane thing to do.. :wink:
These users thanked the author Deaimel for the post (total 4):
deniska (Fri Nov 20, 2020 12:07 am) • Matteo V (Fri Nov 20, 2020 1:57 am) • ulukaya (Fri Nov 20, 2020 4:46 am) • zlatko23 (Fri Nov 20, 2020 8:40 am)
Rating: 26.67%

SolarSet
Frequent Poster
Posts: 271
Joined: Sat May 05, 2018 9:30 am
Kiting since: 2017
Local Beach: Hel Peninsula
Gear: Boost3 7m
Switchblades 10m,
XR6 8m & 11m
Soul 15m
NHP Split
Shinn Ronson
Brand Affiliation: None
Has thanked: 17 times
Been thanked: 51 times

Re: Core Sensor 3 Safety Issues (Core statement in initial post)

Postby SolarSet » Sat Nov 21, 2020 10:28 am

I had 8x 2h each sessions on my Sensor 3+ now and during last few sessions I had closely monitored power line for wear and so far I didn’t notice anything.
I got my kite set & bar back in September.
I don’t rinse, dry or do any special bar treatment steps that some people recommend here, only splash some sea water after kiting.
It would be interesting to hear from other people how much they rode on sensor 3+ and if they seen any wear?

User avatar
Toby
Very Frequent Poster
Posts: 41390
Joined: Mon Sep 24, 2001 1:00 am
Kiting since: 2000
Weight: 98 kg
Local Beach: Cumbuco, Brazil
Barra do Cauipe, Brazil
Favorite Beaches: same
Style: Airstyle
Gear: Rebel 2015 18
Brand Affiliation: None.
Location: World (KF Admin)
Has thanked: 338 times
Been thanked: 728 times
Contact:

Re: Core Sensor 3 Safety Issues (Core statement in initial post)

Postby Toby » Fri Nov 27, 2020 1:26 pm

Here the video on how to exchange the powerline


These users thanked the author Toby for the post:
zlatko23 (Fri Nov 27, 2020 2:26 pm)
Rating: 6.67%

kitetime
Rare Poster
Posts: 11
Joined: Mon Nov 09, 2020 9:21 pm
Kiting since: 2014
Local Beach: East Coast Australia
Style: Freestyle
Gear: Core Nexus 2
Brand Affiliation: None
Has thanked: 1 time
Been thanked: 21 times

Re: Core Sensor 3 Safety Issues (Core statement in initial post)

Postby kitetime » Mon Nov 30, 2020 5:15 am

I have now received a sensor 2 power line and ring set under warranty. It fits perfectly and after 8 sessions there is no sign of wear. The dealer and Australian distributor were very helpful about the mater. I am pleased Core has acknowledges a problem and is working on a solution... hopefully this thread has done its job and forced their hand.
These users thanked the author kitetime for the post (total 3):
Havre (Mon Nov 30, 2020 6:24 am) • Kerplow (Mon Nov 30, 2020 8:01 am) • zlatko23 (Mon Nov 30, 2020 2:51 pm)
Rating: 20%

Kerplow
Medium Poster
Posts: 56
Joined: Thu Nov 05, 2020 9:27 am
Kiting since: 2010
Weight: 67 Kg
Local Beach: EU
Style: Allrounder
Gear: Looking for a new quiver
Brand Affiliation: None
Has thanked: 23 times
Been thanked: 12 times

Re: Core Sensor 3 Safety Issues (Core statement in initial post)

Postby Kerplow » Mon Nov 30, 2020 8:01 am

kitetime wrote:
Mon Nov 30, 2020 5:15 am
I have now received a sensor 2 power line and ring set under warranty. It fits perfectly and after 8 sessions there is no sign of wear. The dealer and Australian distributor were very helpful about the mater. I am pleased Core has acknowledges a problem and is working on a solution... hopefully this thread has done its job and forced their hand.
Glad to hear this ;)

notamondayperson
Rare Poster
Posts: 21
Joined: Mon Mar 16, 2020 7:13 pm
Kiting since: 2012
Local Beach: Castelldefels, Sant Pere Pescador
Favorite Beaches: Tarifa
Style: Freeride - Old school
Gear: Core XR6 12M
Core XR5 9m
Core XR4 7m
Core XR4 15m
Core Sensor 3+ Bar
Board: Clash Reincarnation 140cm
Brand Affiliation: None
Has thanked: 14 times
Been thanked: 10 times
Contact:

Re: Core Sensor 3 Safety Issues (Core statement in initial post)

Postby notamondayperson » Tue Dec 01, 2020 4:57 pm

kitetime wrote:
Mon Nov 30, 2020 5:15 am
I have now received a sensor 2 power line and ring set under warranty. It fits perfectly and after 8 sessions there is no sign of wear. The dealer and Australian distributor were very helpful about the mater. I am pleased Core has acknowledges a problem and is working on a solution... hopefully this thread has done its job and forced their hand.
I'm getting my replacement on Friday. will report once I try it, but I'm too pleased Core has acknowledged a problem and is working on a solution

SolarSet
Frequent Poster
Posts: 271
Joined: Sat May 05, 2018 9:30 am
Kiting since: 2017
Local Beach: Hel Peninsula
Gear: Boost3 7m
Switchblades 10m,
XR6 8m & 11m
Soul 15m
NHP Split
Shinn Ronson
Brand Affiliation: None
Has thanked: 17 times
Been thanked: 51 times

Re: Core Sensor 3 Safety Issues (Core statement in initial post)

Postby SolarSet » Tue Dec 01, 2020 7:40 pm

Can you guys take some pictures of replacement part and old one? It would interesting to see if they changed anything and if yes did they implemented into recent once?
These users thanked the author SolarSet for the post:
notamondayperson (Wed Dec 02, 2020 11:45 am)
Rating: 6.67%

notamondayperson
Rare Poster
Posts: 21
Joined: Mon Mar 16, 2020 7:13 pm
Kiting since: 2012
Local Beach: Castelldefels, Sant Pere Pescador
Favorite Beaches: Tarifa
Style: Freeride - Old school
Gear: Core XR6 12M
Core XR5 9m
Core XR4 7m
Core XR4 15m
Core Sensor 3+ Bar
Board: Clash Reincarnation 140cm
Brand Affiliation: None
Has thanked: 14 times
Been thanked: 10 times
Contact:

Re: Core Sensor 3 Safety Issues (Core statement in initial post)

Postby notamondayperson » Wed Dec 02, 2020 11:46 am

SolarSet wrote:
Tue Dec 01, 2020 7:40 pm
Can you guys take some pictures of replacement part and old one? It would interesting to see if they changed anything and if yes did they implemented into recent once?
will do once I receive it .
These users thanked the author notamondayperson for the post:
SolarSet (Wed Dec 02, 2020 1:33 pm)
Rating: 6.67%

Matteo V
Very Frequent Poster
Posts: 2064
Joined: Mon Mar 20, 2017 3:42 pm
Local Beach: US, Iowa/Nebraska/Kansas/Utah/Oregon Coast
Favorite Beaches: Ft. Stevens, North coast of Oregon
Style: Just like school in summertime
Gear: Delta Kites and LF Kitefish QuadMod
Snowboard (Cambered and Rockered)
Foil kites on the snow
Brand Affiliation: NONE F--- the corporate world
Has thanked: 141 times
Been thanked: 166 times

Re: Core Sensor 3 Safety Issues (Core statement in initial post)

Postby Matteo V » Wed Dec 02, 2020 6:42 pm

Kerplow wrote:
Mon Nov 30, 2020 8:01 am
kitetime wrote:
Mon Nov 30, 2020 5:15 am
I have now received a sensor 2 power line and ring set under warranty. It fits perfectly and after 8 sessions there is no sign of wear. The dealer and Australian distributor were very helpful about the mater. I am pleased Core has acknowledges a problem and is working on a solution... hopefully this thread has done its job and forced their hand.
Glad to hear this ;)
Maybe this thread got COREporate kiteboarding off their butts? Any time you have to close down a thread to keep advertisers happy, you know someone got thier butt chewed.


Return to “Kitesurfing”

Who is online

Users browsing this forum: No registered users and 77 guests