COR electric pump

[consumer]

Always tomorrow

[nixmatters]

Seen today at ISPO.
Weighs about 1kg. Max pressure 20psi in 0.2psi increments.
Not sand-proof yet, but the guys are working on it.
Should be launching spring 2023.

[Toby]

Similar to the Avro pump

[andylc]

That looks almost identical to the one I got for free with my Mini for tyre inflation. Slightly different pressures but I’m sure very similar internals, other than presumably rechargeable rather than 12v driven.

[nixmatters]

That looks almost identical to the one I got for free with my Mini for tyre inflation. Slightly different pressures but I’m sure very similar internals, other than presumably rechargeable rather than 12v driven.

Yes, rechargeable. I was shown a tech specs sheet - 2200mah 34Wh battery.

Similar to the Avro pump

Definitely smaller than the Avro pump.

Has 2 powerful LEDs, which I find quite handy.

[pmania]

Very entertaining to read this topic!
There is a new PSI meter you can add as an accessoire, because backers complained on the non pro version the led lights on the cor pump weren't very clear. I am suprised this isn't mentioned here. The price was around half more including tax & customs and maybe a little part for shipping costs again or something.
There is only this picture as far as I know of the digital Gauge: https://ksr-ugc.imgix.net/assets/039/27 ... 8ef823eac0
It was:

• Reward Level HK$ 698
  Total Add-ons (Digital Gauge) HK$ 199
  
  Total Shipping Fees HK$ 79
  Total Tax HK$ 134.55
  
  Total Amount HK$ 1,110.55
  Pledged on Kickstarter - HK$ 717.00
  Paid on PlegdeBox - HK$ 0
  
  Balance Amoun Due HK$ 393.55 is around $ 50 dollar or 48 euro I think I paid 52 euro because of not so good transaction costs through paypal

No video yet with this new psi meter and there is a video with the pro version but there is music added to it, so you can't hear the pump. Would have been a nice comparision, maybe the pro version is like 2 cor pumps & bigger battery but that is just speculation there are some drawed sketches on the kickstarter page. This is still going on idiegogo. Too bad another gadget called milo ( www.okmilo.com ) didn't do an indiegogo campaign after the KS one, I am interested in that also.

So all in all this is was around 3 normal pumps, I do use an indestructible pump hose.

cor.png (162.6 KiB) Viewed 234 times

[leepasty]

Very entertaining to read this topic!
There is a new PSI meter you can add as an accessoire, because backers complained on the non pro version the led lights on the cor pump weren't very clear. I am suprised this isn't mentioned here. The price was around half more including tax & customs and maybe a little part for shipping costs again or something.
There is only this picture as far as I know of the digital Gauge: https://ksr-ugc.imgix.net/assets/039/27 ... 8ef823eac0
It was:

• Reward Level HK$ 698
  Total Add-ons (Digital Gauge) HK$ 199
  
  Total Shipping Fees HK$ 79
  Total Tax HK$ 134.55
  
  Total Amount HK$ 1,110.55
  Pledged on Kickstarter - HK$ 717.00
  Paid on PlegdeBox - HK$ 0
  
  Balance Amoun Due HK$ 393.55 is around $ 50 dollar or 48 euro I think I paid 52 euro because of not so good transaction costs through paypal

No video yet with this new psi meter and there is a video with the pro version but there is music added to it, so you can't hear the pump. Would have been a nice comparision, maybe the pro version is like 2 cor pumps & bigger battery but that is just speculation there are some drawed sketches on the kickstarter page. This is still going on idiegogo. Too bad another gadget called milo ( www.okmilo.com ) didn't do an indiegogo campaign after the KS one, I am interested in that also.

So all in all this is was around 3 normal pumps, I do use an indestructible pump hose.

Hold on you have paid out more money even though you’ve not got a cor pump yet

[Nak]

Very entertaining to read this topic!
There is a new PSI meter you can add as an accessoire, because backers complained on the non pro version the led lights on the cor pump weren't very clear. I am suprised this isn't mentioned here. The price was around half more including tax & customs and maybe a little part for shipping costs again or something.
There is only this picture as far as I know of the digital Gauge: https://ksr-ugc.imgix.net/assets/039/27 ... 8ef823eac0
It was:

• Reward Level HK$ 698
  Total Add-ons (Digital Gauge) HK$ 199
  
  Total Shipping Fees HK$ 79
  Total Tax HK$ 134.55
  
  Total Amount HK$ 1,110.55
  Pledged on Kickstarter - HK$ 717.00
  Paid on PlegdeBox - HK$ 0
  
  Balance Amoun Due HK$ 393.55 is around $ 50 dollar or 48 euro I think I paid 52 euro because of not so good transaction costs through paypal

No video yet with this new psi meter and there is a video with the pro version but there is music added to it, so you can't hear the pump. Would have been a nice comparision, maybe the pro version is like 2 cor pumps & bigger battery but that is just speculation there are some drawed sketches on the kickstarter page. This is still going on idiegogo. Too bad another gadget called milo ( www.okmilo.com ) didn't do an indiegogo campaign after the KS one, I am interested in that also.

So all in all this is was around 3 normal pumps, I do use an indestructible pump hose.

[Nak]

,.............

[Smeagle]

There is a new PSI meter you can add as an accessoire, because backers complained on the non pro version the led lights on the cor pump weren't very clear. I am suprised this isn't mentioned here. The price was around half more including tax & customs and maybe a little part for shipping costs again or something.
There is only this picture as far as I know of the digital Gauge: https://ksr-ugc.imgix.net/assets/039/27 ... 8ef823eac0

So you can add this pressure meter later yourself? This looks very, very fake, I see no way how that could ever work. You would need to connect a sensor to the output or tap into the existing sensor, connect power to the meter, "make room" for the meter etc. - can't work. Maybe if they planned for that from the beginning? But it does not look like that.

Also a PSI meter is alone is not enough. You need to set pressure goal somehow and it need to stop pumping somehow. After seening this "accessoire" my fake-detector is on high alert again.